522363

Interphase CHART MASTER V6 Manual

18
Zoom out
Zoom in
Previous page
1/89
Next page
20 User Manual
with the ship's position. All navigation data is referred to this destination.
2.8 RANGE/BEARING FUNCTION
The Range/Bearing function allows to measure the distance and bearing between
two points on the Chart page.
It also finds a point on the map knowing the starting point and the distance and
bearing from the starting point. You enter manually the distance and bearing from
the origin and saves a Mark to the position found.
In both cases, the circle and the line are always removed once the function is
finished.
The starting point is the cursor or a ship's position (if you are in Home mode).
The ending point can be selected using the cursor or it can be calculated entering
the Range and Bearing values from the starting point.
Selecting Ending point with cursor
Move the cursor to the starting point or press [HOME] + [ENTER] +
"RANGE/BEARING" + [ENTER] + move the cursor to select your ending point
A window containing the distance and bearing values between the starting point
and the ending point is shown. Bearing Line and Variable Range Marker are dis-
played until you press [ENTER] to add a Mark at the ending point or press [CLEAR]
to exit.
Selecting Ending point by entering Range & Bearing
Move the cursor to the starting point or press [HOME] + [ENTER] + "RANGE/
BEARING" + [ENTER] + [ENTER] + enter distance and bearing values by
using the cursor
Pressing [ENTER] a Mark appears on the ending point.
2.9 MAN OVERBOARD (MOB)
If a person or object is lost overboard and you need to return to the location, use
the MOB (Man OverBoard) function.
To activate the MOB function, a valid GPS fix must be available.
Inserting MOB
[MOB] + [CONFIRM]
If MOB is already placed:
[MOB] + [NEW] + [CONFIRM]
removes the existing MOB and places a new one.
Once inserted, the system performs the following operations:
1. places the MOB icon at ship's position
2. stops navigation to an existing destination (if present)
3. sets the MOB as destination
Selecting Auto Info on MOB
Place the cursor on MOB symbol
An information window appears, showing the bearing and distance to the MOB
position.
Deleting MOB
[MOB] + "DELETE"
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphase CHART MASTER V6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphase CHART MASTER V6 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info