522371

Interphase CHART MASTER 11 CV plus Manual

58
Zoom out
Zoom in
Previous page
1/89
Next page
60 User Manual
headway back to the courseline while also proceeding toward the destination
Waypoint.
♦ Cultural Features
Any man-made topographic feature as built-up area, buildings, roads.
♦ Datum
The Latitude and Longitude lines printed on any map are based on certain
models of the shape of the earth: these models are called Datum or Coordi-
nate Systems. There are many different Datum in use, each one gives differ-
ent Lat/Lon positions for an identical point on the surface of the earth (see
also Map Datum and Fix Datum).
♦ Dead Reckoning
It is the procedure to determine the current position of a vessel by applying to
the last known position the way that has been made (since the last known
position was received). This procedure is normally based on the last received
GPS position, Speed and Course or to the last received GPS position, Log
Speed and Heading.
♦ Default
It indicates the original factory setting for any menu selection. The default
values are set after a Master Reset (RAM Clear).
♦ Depth Areas
Depth Areas are the sea areas included in the user selectable range of mini-
mum and maximum depth limits. The sea area that is beyond the selected
range is filled by an uniform white color, the sea area that is inside the se-
lected range is filled by ordinary multicolor shading. The Spot Soundings and
Depth Contours are displayed on the range only.
♦ Depth Line
(Also called Bathymetric Line) It is the imaginary line connecting points of
equal water depth.
♦ Destination
In order to tag on the chart the point, towards which the ship is Heading, you
can use a special mark, called destination. When the destination is placed, all
navigation data referred to this point.
♦ DGPS = Differential GPS
Provides even greater positioning accuracy than standard GPS.
♦ DPT = Depth from Trasducer
Water Depth below the Trasducer. The Distance from the Depth Transducer to
the ground.
♦ DST = Distance
The geographical distance between two points on the map. It is possible to
select the unit among Nm, Sm and Km.
♦ ETA = Estimated Time of Arrival
The predicted time of reaching a destination or Waypoint
♦ File
Collection of information (of the same type) stored on a User C-CARD. Each
file must have a unique name, ideally one that describes its contents. Filenames
are kept in a directory on each User C-CARD.
♦ Fix
It is the current position of the vessel provided by the GPS (connected to the
chart plotter or built-in) or other positioning systems.
♦ Fix Status
It indicates the quality of the position fix signal.
♦ Fuel Consumption Rate
It represents the estimated fuel consumption rate (per hour) of an engine
boat referred to its relative estimated cruising speed.
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphase CHART MASTER 11 CV plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphase CHART MASTER 11 CV plus in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info