595761
93
Zoom out
Zoom in
Previous page
1/154
Next page
Chapter 7 — Configure the Computer
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 79
c For Validate Server Certificate, choose Yes.
7 If you choose TLS:
a Load a user and root certificate on your CN50. For help, see
“Load a Certificate” on page 86.
b Enter a User Name and Subject Name.
c For Validate Server Certificate, choose Yes.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
Configure WPA or WPA2 Personal (PSK) Security with Funk
After you configure the communications and radio parameters on
your mobile computer and select Funk as your security choice, you can
configure WPA-PSK or WPA2-PSK.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Select the profile you want to configure.
4 For Association, choose WPA or WPA2.
5 For 8021x, choose None.
6 For Pre-Shared Key, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the CN50 internally converts it to a
pre-shared key. This value must match the passphrase on the
authenticator.
7 Save your settings.
Note: The correct date must be set on your CN50 when you
enable Validate Server Certificate.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec CN50 Windows Embedded Handheld 6.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CN50 Windows Embedded Handheld 6.5 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info