595761

Intermec CN50 Windows Embedded Handheld 6.5 Manual

81
Zoom out
Zoom in
Previous page
1/154
Next page
Chapter 7 — Configure the Computer
CN50 Mobile Computer for Windows Embedded Handheld 6.5 User Manual 67
Configure 802.11 Radio Communications
Your CN50 has an 802.11 radio to transfer data using wireless
communications. This section assumes that your wireless network is
set up, including your access points. By default, the Wi-Fi radio is
enabled.
About Wi-Fi (802.11b/g Radio) Communications
To add your mobile computer to your Wi-Fi network so you can
transfer data wirelessly, you need to enable the Wi-Fi radio and
configure radio parameters. You can use:
• Intermec Settings to enable the Wi-Fi radio. For help, see the next
section, “Enable the Wi-Fi Radio With Intermec Settings.”
• ScanNGo bar codes to enable the Wi-Fi radio and set the Funk
security to its default settings. For help, see “Enable the Wi-Fi
Radio With ScanNGo Bar Codes” on page 68.
Enable the Wi-Fi Radio With Intermec Settings
If you need to enable the radio and add your mobile computer to your
Wi-Fi network, use the following procedure.
1 Start Intermec Settings by tapping Start > Settings > System >
Intermec Settings.
2 Tap Communications > 802.11 Radio > Radio Enabled.
3 Select the Radio Enabled check box and tap OK.
By default, the computer selects Funk security and enables DHCP.
4 Use Intermec Settings to configure the parameters you need to
communicate with your network.
5 Configure Wi-Fi security. For help, see “About Wireless Security”
on page 76.
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec CN50 Windows Embedded Handheld 6.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CN50 Windows Embedded Handheld 6.5 in the language / languages: English as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info