595724
22
Zoom out
Zoom in
Previous page
1/145
Next page
CN
4
Mobile Computer
CN4, CN4e, CN4NI
Users Manual
ii CN4 Mobile Computer User’s Manual
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2009-2011 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(www.openssl.org).
This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com).
miniSD is a trademark of the SD Card Association. The SD logo is a trademark.
This product uses Regex++, Index software during its operational phases. The owner of Regex++
has granted use of the software to anyone provided such use is accompanied by the following
copyright and permission notice:
Regex++, Index. (Version 3.31, 16th Dec 2001)
Copyright © 1998-2001 Dr John Maddock
Permission to use, copy, modify, distribute and sell this software and its documentation for any
purpose is hereby granted without fee, provided that the above copyright notice appear in all
copies and that both that copyright notice and this permission notice appear in supporting
documentation. Dr John Maddock makes no representations about the suitability of this software
for any purpose. It is provided “as is” without express or implied warranty.
CN4 Mobile Computer User’s Manual iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number
Date Description of Change
003 10/2011 Revised to add information on sending feedback
about this manual and to correct the clean booting
procedure.
002 08/2010 Revised to support the CN4NI Mobile Computer
and the EA11 area imager.
iv CN4 Mobile Computer User’s Manual
Contents
CN4 Mobile Computer User’s Manual v
Contents
Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Global Services and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Web Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Send Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Service Location Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x
Who Should Read This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Patent Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
1
Using the CN4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Introducing the CN4 Series Mobile Computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
What’s New in This Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Changing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking the Battery Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maximizing Battery Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Managing Power on the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Choosing a Power Management Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Customizing Power Timeouts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the Color-Coded Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Entering Characters on the Alphabetic and QWERTY Keypads. . . . . . . . . . . . . . . 13
Using Caps Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Entering Characters on the Numeric Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the Green Key Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the Windows Mobile Application Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the Power Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Understanding the Audio Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using the CN4 as a Cell Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Adjusting the Volume of the Rear Speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Enabling the Vibrate Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Contents
vi CN4 Mobile Computer User’s Manual
Using the Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Understanding the Screen Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Aligning the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Configuring the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Understanding the Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Reading Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Improving Imager Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Capturing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Using the Image Capture Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Configuring the Image Capture Application. . . . . . . . . . . . . . . . . . . . . . . . 30
Copying Images to Your Desktop PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Integrating Image Capture Into Your Application . . . . . . . . . . . . . . . . . .32
Capturing Signatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Capturing Documents (EA21 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using the Color Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Installing a miniSD or SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Setting Up GPS on Your CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Using the GPSID Installed on the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Learning About Additional GPS Options for the CN4. . . . . . . . . . . . . . . . . . . . . . . 42
2
Connecting and Configuring the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Managing the CN4 With SmartSystems Foundation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connecting to a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Configuring the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Activating the CDMA Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Activating the GSM/EDGE Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Making a Phone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Turning the Phone On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Configuring the CN4 Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Using Intermec Settings Remotely With SmartSystems Foundation . . . . . . . . . .49
Using Intermec Settings Directly On the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Hiding Menu Items in Intermec Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Configuring the CN4 for Your Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Configuring 802.11b/g Radio Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Contents
CN4 Mobile Computer User’s Manual vii
Configuring Ethernet Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Configuring Bluetooth Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connecting to a Bluetooth Scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Connecting to a Bluetooth Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Connecting to a Bluetooth Audio Device. . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Using Serial and USB Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Managing Network Connections With iConnect. . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Configuring Wireless Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Choosing Between Microsoft and Funk Security . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Selecting a Funk Security Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Selecting Microsoft as Your Security Choice. . . . . . . . . . . . . . . . . . . . . . . .65
Loading a Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Disabling Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
3
Developing and Installing Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Developing Applications for the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Packaging Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Choosing a Target Location for the Application . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Installing Applications on the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Installing Applications Using SmartSystems Foundation Console. . . . . . . . . . . .73
Installing Applications Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . 74
Installing Applications Using a Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Installing Applications Using the FTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Launching an Application Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Integrating Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Calling Image Capture From Your Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Creating and Editing the Image Capture XML File . . . . . . . . . . . . . . . . . . . . . . . . . .77
Image Capture XML Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Freeing Up Virtual Memory for Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Upgrading the System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Locating Upgrade Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Upgrading the CN4 Using SmartSystems Foundation. . . . . . . . . . . . . . . . . . . . . . .84
Upgrading the CN4 Using a miniSD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Contents
viii CN4 Mobile Computer User’s Manual
4
Troubleshooting and Maintaining the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . 87
Calling Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Troubleshooting the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Checking 802.11 Network Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Resetting the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Warm Booting the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Cold Booting the CN4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Clean Booting the CN4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Cleaning the CN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
A
Specifications and Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Physical and Environmental Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Data Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Device Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
Core Messaging Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
B
Keypads and Keystrokes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Standard Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
Other Available Characters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Language-Specific Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
I
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Before You Begin
CN4 Mobile Computer User’s Manual ix
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Information
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can
be damaged if you do not follow the safety warnings and cautions.
This section explains how to identify and understand warnings,
cautions, and notes that are in this document.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec website at www.intermec.com and click Support >
Returns and Repairs > Warranty.
Disclaimer of warranties: The sample code included in this document
is presented for reference only. The code does not necessarily
represent complete, tested programs. The code is provided “as is with
all faults.” All warranties are expressly disclaimed, including the
implied warranties of merchantability and fitness for a particular
purpose.
A warning alerts you of an operating procedure, practice,
condition, or statement that must be strictly observed to avoid
death or serious injury to the persons working on the equipment.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to prevent
equipment damage or destruction, or corruption or loss of data.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Before You Begin
x CN4 Mobile Computer User’s Manual
Web Support
Visit the Intermec website at www.intermec.com to download our
current manuals (in PDF).
Visit the Intermec technical knowledge base (Knowledge Central) at
www.intermec.com and click Support > Knowledge Central to
review technical information or to request technical support for your
Intermec product.
Send Feedback
Your feedback is crucial to the continual improvement of our
documentation. To provide feedback about this manual, please
contact the Intermec Technical Communications department directly
at TechnicalCommunications@intermec.com.
Telephone Support
In the U.S.A. and Canada, call 1-800-755-5505.
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the
Intermec website, click About Us > Contact Us.
Service Location Support
For the most current listing of service locations, click Support >
Returns and Repairs > Repair Locations.
For technical support in South Korea, use the after service locations
listed below:
AWOO Systems
102-1304 SK Ventium
522 Dangjung-dong
Gunpo-si, Gyeonggi-do Korea, South 435-776
Contact: Mr. Sinbum Kang
Telephone: +82-31-436-1191
Email: mjyun@awoo.co.kr
IN Information System PTD LTD
6th Floor
Daegu Venture Center Bldg 95
Shinchun 3 Dong
Donggu, Daegu City, Korea
Email: jmyou@idif.co.kr or korlim@gw.idif.co.kr
Before You Begin
CN4 Mobile Computer User’s Manual xi
Who Should Read This Manual
This manual is written for the person who is responsible for
installing, configuring, and maintaining the CN4, CN4e, and CN4NI
Mobile Computers.
This manual provides you with information about the features of the
mobile computer and how to install, configure, operate, maintain,
and troubleshoot it.
Before you work with the mobile computer, you should be familiar
with your network and general networking terms, such as IP address.
Related Documents
This list contains related Intermec documents and their part
numbers.
Intermec Settings Command Reference Manual
Intermec Developer Library (IDL) Resource Kit Developer’s Guide
The Intermec website at www.intermec.com contains our documents
(as PDF files) that you can download for free.
To download documents
1 Visit the Intermec website at www.intermec.com.
2 Click the Products tab.
3 Using the Products menu, navigate to your product page. For
example, to find the CN4 computer product page, click
Computers > Handheld Computers > CN4.
4 Click the Manuals tab.
If your product does not have its own product page, click Support >
Manuals. Use the Product Category, the Product Family, and
Product to help find your documentation.
Before You Begin
xii CN4 Mobile Computer User’s Manual
Patent Information
Product is covered by one or more of the following patents:
4882476; 4894523; 4953113; 4961043; 4970379; 4988852; 5019699;
5021642; 5038024; 5081343; 5095197; 5144119; 5144121; 5182441;
5187355; 5187356; 5195183; 5216233; 5216550; 5195183; 5195183;
5218191; 5227614; 5233172; 5241488; 5243602; 5258606; 5278487;
5288985; 5308966; 5322991; 5331136; 5331580; 5342210; 5349678;
5359185; 5371858; 5373478; 5389770; 5397885; 5410141; 5414251;
5416463; 5442167; 5464972; 5468947; 5468950; 5477044; 5486689;
5488575; 5500516; 5502297; 5504367; 5508599; 5514858; 5530619;
5534684; 5536924; 5539191; 5541419; 5548108; 5550362; 5550364;
5565669; 5567925; 5568645; 5572007; 5576529; 5592512; 5594230;
5598007; 5608578; 5616909; 5619027; 5627360; 5640001; 5657317;
5659431; 5671436; 5672860; 5684290; 5719678; 5729003; 5742041;
5761219; 5764798; 5777308; 5777309; 5777310; 5786583; 5793604;
5798509; 5798513; 5804805; 5805807; 5811776; 5811777; 5818027;
5821523; 5828052; 5831819; 5834753; 5834749; 5837987; 5841121;
5842070; 5844222; 5854478; 5862267; 5869840; 5873070; 5877486;
5878395; 5883492; 5883493; 5886338; 5889386; 5892971; 5895906;
5898162; 5902987; 5902988; 5912452; 5923022; 5936224; 5949056;
5969321; 5969326; 5969328; 5979768; 5986435; 5987192; 5987499;
5992750; 6003775; 6012640; 6016960; 6018597; 6024289; 6034379;
6036093; 6039252; 6064763; 6075340; 6095422; 6097839; 6102289;
6102295; 6109528; 6119941; 6128414; 6138915; 6149061; 6149063;
6152370; 6155490; 6158661; 6164542; 6164545; 6173893; 6195053;
6234393; 6234395; 6244512; 6249008; 6328214; 6330975; 6345765;
6356949; 6367699; 6375075; 6375076; 6375344; 6431451; 6435411;
6484944; 6488209; 6497368; 6532152; 6538413; 6539422; 6621942;
6641046; 6681994; 6687403; 6688523; 6732930
There may be other U.S. and foreign patents pending.
1
1
Using the CN4
This chapter introduces the CN4 and CN4e Mobile
Computers with Windows® Mobile® 6.1. It also contains
hardware and software configuration information to assist
you in getting the most out of your computer. This chapter
contains these topics:
Introducing the CN4 Series Mobile Computers
What’s New in This Release
Using the Battery
Using the Keypad
Understanding the Audio Features
Using the Screen
Understanding the Status LEDs
Using the Imager
Using the Color Camera
Installing a miniSD or SIM Card
Setting Up GPS on Your CN4
Chapter 1 — Using the CN4
2 CN4 Mobile Computer User’s Manual
Introducing the CN4 Series Mobile Computers
The Intermec CN4 and CN4e Mobile Computers are ergonomically
designed mobile computers built on the Microsoft Windows Mobile®
6.1 operating system. They are lightweight, easy-to-use, and run most
software developed for the Windows Mobile platform, including
standalone, client-server, and browser-based applications.
The CN4 and CN4e support similar feature sets. The CN4e offers
extended environmental specifications and larger keys for data
intensive applications. The CN4NI (both the CN4 and CN4e) is
certified for use in non-incendive environments. Throughout this
manual, all versions of the computer are referred to as the CN4 Series
Mobile Computer or CN4.
CN4e and CN4 Mobile Computers
The CN4 Series Mobile Computer with an IEEE 802.11b/g radio installed is
Wi-Fi® certified for interoperability with other 802.11b/g wireless LAN
devices.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 3
Standard CN4 features include:
GPS, 802.11b/g, Bluetooth®, and WWAN radios. For WWAN,
choose from one of these options:
UMTS/HSDPA
CDMA/1xRTT/EV-DO Rev A
IP64 seal rating and 1.8 m (6 ft) drop specification
a 2-megapixel color camera with LED flash, EA21 Area Imager, or
EA11 Area Imager.
128 MB RAM.
a numeric, QWERTY (CN4), or alphabetic (CN4e) keypad.
Use this manual to understand how to use the features and options
available on the CN4. For information about the Windows Mobile
applications installed on the CN4, see the online help.
Whats New in This Release
This version of the manual has been updated to:
add information on sending feedback about this manual. For
more information, see “Send Feedback” on page x.
correct the clean booting procedure. For more information, see
“Clean Booting the CN4” on page 99.
Using the Battery
The CN4 uses the following Intermec batteries as a main power
source. All have been certified to meet the IEEE 1725 standard for
rechargeable batteries.
Standard and Extended Batteries for CN4 and CN4e
Computer Uses This Standard Battery Uses This Extended Battery
CN4 AB8 or AB15 AB9 or AB16
CN4e N/A AB9 or AB16
CN4NI N/A AB28
Chapter 1 — Using the CN4
4 CN4 Mobile Computer User’s Manual
Standard batteries have 8.1 Watt hours capacity and extended
batteries have 14.8 Watt hours capacity. You must fully charge the
battery before you can use the CN4.
Dispose of used batteries promptly. Keep away from children. Contact
your Intermec representative for replacement batteries.
Charging the Battery
The battery pack should be fully charged before you use the CN4 for
the first time. If battery temperatures are within the battery charging
range of 0 °C to 40 °C (32 °F to 104 °F), the standard battery pack
takes up to four hours to charge. The extended battery pack takes up
to five hours.
The battery is fully charged when the battery status LED shows a
steady green.
To charge the battery
Insert the battery into a quad battery charger, a single dock, or a
multidock, or attach external power to the CN4 with the battery
installed. For information on these accessories, see Accessories”
on page 109.
Changing the Battery
When you remove the battery from the CN4, an internal super
capacitor maintains your status, memory, and real-time clock for up
to five minutes. To maximize this time, suspend the CN4 before
changing the battery.
The battery used in this device may present a fire or chemical
burn hazard if it is mistreated. Do not disassemble it, heat it
above 100 °C (212 °F) or incinerate it.
If you fail to replace the low battery immediately, you may lose
important data or applications.
If the CN4 is not on external power and you remove the battery
pack, you need to install a charged battery within 5 minutes, or
the CN4 resets and you could lose data.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 5
To change the battery
1 Press and release the Power button to suspend the CN4.
2 Unsnap the top end of the handstrap.
3 Slide the tab on the battery to release it from the CN4.
4 Place the end of the battery into the battery compartment as
shown in the next illustration, and press down on the other end of
the battery until it clicks into place.
5 Snap the top of the handstrap into place.
Note: For the CN4NI, use a Phillips screwdriver to loosen and
tighten the battery set screw.
Chapter 1 — Using the CN4
6 CN4 Mobile Computer User’s Manual
Checking the Battery Status
A quick way to check the status of your battery is to look at the
battery icon on the CN4 Status bar.
The Battery Status LED indicates the charging status.
Battery Icon Status
Icon Status
Battery is fully charged.
Battery has a medium charge. You should be able to work for several
more hours before changing batteries.
Battery is low. You need to replace or charge the battery soon.
Battery is critically low. You need to replace or charge the battery now.
Battery is charging.
Understanding the Battery Status LED
Battery Status Description
Steady green The battery is more than 95% charged and CN4 is
on a charger.
Blinking red The battery is low. CN4 goes into Suspend mode.
Charge or replace the battery.
Steady red and the CN4
is attached to external
power.
The battery is charging.
Steady red and the CN4
is not attached to
external power.
The CN4 firmware is not working properly. Cold
boot the CN4 as described in “Cold Booting the
CN4” on page 98.
Battery status LED
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 7
You can also check the battery status by using the Power application.
To check the battery status
Tap Start > Settings > the System tab > Power > the Battery tab.
Steady amber The battery is missing or is unable to charge.
If the battery will not charge, it may be because the
temperature is outside of the charging range, or
you may be using a battery not approved by
Intermec. You need to use one of the battery
models specified in “Standard and Extended
Batteries for CN4 and CN4e” on page 3.
Off The CN4 is not on external power and the battery
is operating normally.
Understanding the Battery Status LED (continued)
Battery Status Description
Chapter 1 — Using the CN4
8 CN4 Mobile Computer User’s Manual
Maximizing Battery Life
Batteries are chemical devices. If the batteries are left sitting on a shelf
for long periods of time outside the CN4, the batteries slowly
discharge, eventually to zero if left uncharged. The battery chemistry
resists normal degradation if you store the battery in a charger as
opposed to leaving the battery in a discharged state. See the following
table for tips you can do to maximize the life of your battery.
Managing Power on the CN4
Several factors determine the life of your battery such as extreme
temperatures, input devices, and your usage.
By default, the CN4 goes into a lower power mode or turns off after
two minutes of inactivity. Press the Power button to resume activity
at any time.
Battery Conservation Tips
When You Want To: Do This to Save Battery Power:
Operate the CN4 and the
Low Battery status icon
appears or the Battery light
comes on.
Press the Power button to turn off the CN4.
Remove the battery and insert another fully
charged battery within five minutes or you may
lose data. Or, you can connect the CN4 to an
external power source.
Stop using the CN4 for five
minutes or longer.
Make sure the low battery icon is not on the
screen and that the Battery light is not turned
on. Press the Power button to turn off the
CN4.
Store the CN4 for more
than a day.
If you are storing the CN4 for a few days, like
over the weekend, install the charged battery or
attach the CN4 to a power source.
If you are storing the CN4 for longer, remove
and charge the battery, then store both the
battery and the CN4 in a cool location.
If the battery in storage is not used in several
months, you should recharge the battery to
keep it at its performance peak.
Store the battery outside
the CN4.
Store the batteries in a charger.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 9
There are several ways you can manage power:
You can set the amount of time that the screen stays on, or the
amount of time the CN4 stays on after the screen turns off. For
help, see “Customizing Power Timeouts” on page 10.
You can change the amount of time the screen backlight stays on.
For help, see “Configuring the Backlight” on page 22.
You can choose a Power Management Profile to manage power
based on the way you use your CN4. Each profile turns off the
screen and the CN4 at preset times, and maintains data
connections differently. For help, see the next section.
Choosing a Power Management Profile
1 Tap Start > Settings > the System tab > Power Profiler.
2 From the drop-down list, select Windows Mobile Classic,
Windows Mobile Standard, or Windows Mobile Phone. If the
list is grayed out, uncheck the Enable Advanced Settings check
box.
For more information, see the next section, About Power
Management Profiles.”
3 Tap ok in the upper right corner to save your changes.
Chapter 1 — Using the CN4
10 CN4 Mobile Computer User’s Manual
Power Profiler also provides advanced settings that allow you to fine-
tune the power usage. You can choose to have the Power button turn
off the screen or turn off the device.
About Power Management Profiles
Use the Windows Mobile Standard profile (default) for applications
that power off infrequently, such as inventory management or
terminal emulation. If the CN4 does not have any activity, the screen
turns off, but WAN, LAN, or Bluetooth radio connections are
maintained in a low power state. If there continues to be no activity,
the CN4 eventually turns off LAN and Bluetooth data connections
and goes into Suspend mode. The CN4 maintains its WAN
connection during Suspend mode, and still receives incoming phone
calls or other data. To wake up the CN4 and restore other
connections, press the Power or Scan button.
Use the Windows Mobile Classic profile for systems that batch data
and upload it several times a day. This profile does not support
constant data connections over LAN or Bluetooth. It can only
maintain data connections when the CN4 is on and all peripherals are
enabled. If the screen is off, you do not have any LAN, or Bluetooth
connections, but the CN4 maintains its WAN connection and still
receives incoming phone calls or other data. To wake up the CN4 and
restore other connections, press the Power or Scan button.
Use the Windows Mobile Phone profile when you have a system that
requires network wake-up or you need the CN4 to always be
connected to the network. Although the connections are maintained
at a low power mode, this setting typically consumes the most power.
If the screen turns off, the radios continue to maintain the network
connections. To turn the screen back on, press the Power or Scan
button.
Customizing Power Timeouts
Note: You can also configure all of the settings in Power Profiler using
Intermec Settings. For help with Intermec Settings, see “Configuring
the CN4 Parameters” on page 48.
Note: When you set timeout values this way, you override values used
by the Power Management Profiles.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 11
To customize power timeout values
1 Tap Start > Settings > System tab > Power Profiler.
2 In the Power Profile tab, tap Enable Advanced Settings.
3 Tap the Screen Settings tab to change screen timeout values:
Check the Enable Screen Off check box to be able to turn off
the screen independently of the CN4.
To change the amount of inactivity time before the screen
turns off, move the Battery Power or External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
4 Tap the Device Settings tab to change power timeout values:
Check the Enable Device Off check box to be able to turn off
the CN4 by pressing the Power button. This feature is enabled
by default unless you are using the Windows Mobile Phone
power profile.
To change the amount of inactivity time before the CN4 turns
off and goes into Suspend mode, move the Battery Power or
External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
5 Tap the Power Button tab to change what happens when you
press the Power button:
Choose Turn off the Device to put the CN4 in Suspend mode
when you press the Power button. In Suspend mode, data
connections (except for WAN) are turned off. To restore data
connections, you need to press the Power button to wake up
the CN4.
Choose Turn off the Screen if you want to leave the CN4 on
but with the screen turned off when you press the Power
button. This mode uses more power than Suspend mode, but
maintains all data connections. Press the Power button to turn
the screen on.
Chapter 1 — Using the CN4
12 CN4 Mobile Computer User’s Manual
Using the Keypad
The CN4 comes with either a QWERTY keypad or a numeric keypad.
The CN4e comes with either an alphabetic keypad or a numeric
keypad.
The QWERTY and alphabetic keypads are for applications that
require mainly alphabetic data. The numeric keypads are for
applications requiring mainly numeric data.
CN4 QWERTY Keypad CN4 Numeric Keypad
CN4e Alphabetic Keypad CN4e Numeric Keypad
Note: Some available characters are not printed on the keypad
overlays. For a complete list of available characters, see Appendix B,
“Keypads and Keystrokes.”
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 13
Using the Color-Coded Keys
All keypads include color-coded modifier keys for characters, symbols,
and functions printed on the keypad overlay. The numeric keypads
include an orange
b modifier key and a green c modifier key. The
alphanumeric keypads include an orange
b modifier key.
Entering Characters on the Alphabetic and QWERTY Keypads
Press the key for the character to type that character. To type a
character or access a function printed on the keypad overlay, press
b
and then press the key for the character or function you want.
To type a single uppercase letter on the QWERTY and alphabetic
keypads, press
] and then the letter key.
Using Caps Lock
To type only uppercase letters, press b ] to enable the Caps Lock
feature. Press the same key sequence to disable Caps Lock. When Caps
Lock is enabled, the Caps Lock LED turns on.
While Caps Lock is enabled, you can still type orange characters by
pressing
b and then the key for that character. Caps Lock remains
enabled until you press
b ].
Using the Color-Coded Keys
To Do This Press Example
Use an orange character or
function printed above a key.
b key (LED illuminates) and
then the key with the
character or function printed
above it (LED turns off).
On the QWERTY keypad, press
b and then Q to type the @
character.
Use a green character or
function printed above a key.
c key (LED illuminates) and
then the key with the
character or function printed
above it (LED turns off).
On the numeric keypad, press
c
and then 2 to type a lowercase
a.
Lock the orange or green key to
stay on.
b or c twice. On the numeric keypad, press c
twice and the green LED
illuminates and stays on.
Unlock a green or orange key.
b or c once. Press the b or c once to unlock
the key and turn off the LED.
Chapter 1 — Using the CN4
14 CN4 Mobile Computer User’s Manual
Entering Characters on the Numeric Keypads
To type a character or access a function printed in orange on the
keypad overlay, press
b and then press the key for the character or
function you want.
To type a character or access a function printed in green on the
keypad overlay, press
c and then press the key for the character or
function you want.
Above most of the keys, there is a grouping of three or four letters. To
type letters above a key, press
c and then press the key one to four
times depending on the placement of the letter.
For example, above
2 there are the letters “ABC”:
To type “c”, press
c 2 2 2.
To typeC, press
c 1 and then press c 2 2 2.
Using the Green Key Lock Feature
Press c c to enable the Green Key Lock feature. When the green c
key is locked, you can type letters without pressing
c before each
number key.
While the green key is locked, press
1 to toggle between only
uppercase and lowercase letters.
To turn off the Green Key Lock, press
c.
Using the Windows Mobile Application Keys
On the CN4e keypads, the keys closest to the screen are the standard
Windows Mobile application keys.
Windows Mobile Application Keys on CN4e Keypad
Note: If you turn off the Green Key Lock, you may need to press c 1
to return to lowercase letters if uppercase letters were previously
enabled.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 15
On the CN4 keypads, you can access the Windows Mobile application
keys as follows:
Using the Power Button
When you press the Power ^ button, you put the CN4 into Suspend
mode. In this lower power mode, the CN4 continues to supply power
to all memory, but turns off power to most hardware such as the
display. This feature is designed to prolong battery life.
Understanding the Audio Features
The CN4 audio features include two speakers, a microphone, an
external volume control, and multiple software tools for configuring
the volume of sounds.
Using the CN4 as a Cell Phone
When you use the CN4 as a cell phone, use the microphone and a
front speaker for talking on the phone.
Windows Mobile Application Keys on CN4 Keypads
To Use On Numeric Keypad, Press On QWERTY Keypad, Press
Softkey 1 b 1 b W
Softkey 2 b 3 b O
“ok” b | b P
Note: If you do not have a SIM card installed, it may take up to 30
seconds for the CN4 to suspend.
Note: For more information on using the phone, see “Configuring
the Phone” on page 46.
Chapter 1 — Using the CN4
16 CN4 Mobile Computer User’s Manual
Microphone and Front Speaker Locations
To adjust the volume of the front speaker
1 Tap the Volume icon ( ) at the top of the screen.
2 In the Volume adjust box, tap On.
3 Move the volume slider for the phone.
Front speaker
Microphone
Phone volume
slider
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 17
Adjusting the Volume of the Rear Speaker
The rear speaker is used for all other computer audio. You can set the
volume to off, very low, low, medium (default), high, and very high.
Location of the Rear Speaker and Volume Control
Choose one of these methods to change the rear speaker volume.
Use the Volume slider to change the rear speaker volume:
a Tap the Volume icon ( ) at the top of the screen.
b In the Volume adjust box, tap On.
c Use your stylus to move the volume slider for the rear speaker.
Press the side volume button to change the volume:
Press the top to turn the volume up.
Press the bottom to turn the volume down.
Use Intermec Settings to set the default volume. For help, see
“Configuring the CN4 Parameters” on page 48.
Rear speaker
Volume up/down
Rear speaker
volume slider
Chapter 1 — Using the CN4
18 CN4 Mobile Computer User’s Manual
Enabling the Vibrate Mode
You can enable the vibrate mode when audio is difficult to hear, such
as in a high noise environment. When enabled, the CN4 vibrates when
the scanner performs a good read or when the phone receives a call.
To enable the vibrate feature
1 Tap the Volume icon ( ) at the top of the screen.
2 Tap Vibrate.
Using the Screen
The CN4 has a 3.5" diagonal, 240 x 320 pixel (QVGA) transflective
TFT-LCD 64K color display.
The Status bar displays the Start flag, connectivity icons, the
Volume icon, and the time and next appointment.
The Today screen displays shortcuts to some of the applications
installed on the CN4 and important information for the day.
The Command bar displays the onscreen keyboard icon, Windows
Mobile 6.1 links, and icons to any applications that are running, but
are hidden from view.
Note: The Volume icon in the Navigation bar changes to look like a
vibrating CN4 ( ) when the Vibrate feature is enabled.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 19
The Windows Mobile Today Screen
To turn the screen backlight on and off:
For all keypads except the QWERTY keypad, press
b ..
For the QWERTY keypad, press
g.
Using the Stylus
The CN4 has a stylus for selecting items and entering information on
the touch screen.
Status bar
Today screen
Command bar
Note: To help conserve battery power, you can change the amount of
time that the screen backlight stays on. For help, see “Configuring
the Backlight” on page 22.
Functions You Can Perform With the Stylus
Action Description
Tap Touch the screen once with the stylus to select options,
open or close applications, or launch menus from the
Command bar.
Drag Hold the stylus on the screen and drag across the screen to
select text and images.
Tap and hold Tap and hold the stylus on an item to see a menu of actions
available for that item. On the pop-up menu that appears,
tap the action you want to perform.
Chapter 1 — Using the CN4
20 CN4 Mobile Computer User’s Manual
Understanding the Screen Icons
The screen icons on the Status bar and Command bar indicate battery
charge levels, network connections, and so on. Some standard
Microsoft icons are included in this table.
Computer Screen Icons
Icon Description
The battery is full.
The battery is low. You need to replace or charge the battery very
soon.
The CN4 is on external power and the battery is charging.
The volume is turned off. To turn the volume back on, tap this
icon and choose your setting.
The computer is connected to the network.
The computer is not connected to the network.
The 802.11b/g radio is connected to the wireless network.
The phone is connected to your WAN network.
The computer is connected through the USB port to your
desktop PC.
The iConnect application icon. Tap it to set up Ethernet or
Wireless settings.
No SIM card is installed.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 21
Aligning the Touch Screen
If the touch screen does not respond when you tap it with the stylus,
you may need to calibrate the screen.
To align the touch screen
1 Tap Start > Settings > the Systems tab > Screen.
2 Tap Align Screen and follow the instructions to align the screen.
3 Tap ok.
If the touch screen is so out of alignment that you cannot open the
Start menu, you may need to align the screen menu using only the
keypad, or as a last resort you can perform a clean boot. For more
information about performing a clean boot, see “Clean Booting the
CN4” on page 99.
To align the touch screen using the keypad
1 Press
~ (upper left corner of the keypad).
2 Press
d to select Settings and then press e.
3 Press
j or i until the Personal tab is selected.
4 On the CN4e, press
r to select the System tab.
On the CN4, press
b d to select the System tab.
5 Use the arrow keys to choose Screen and then press
e.
6 Tab to Align Screen and press
e.
7 Follow the instructions to align the screen.
8 Tap ok.
Chapter 1 — Using the CN4
22 CN4 Mobile Computer User’s Manual
Configuring the Backlight
By default, the CN4 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
It is possible to override the backlight settings by changing the power
management settings. For more information on configuring power
management, see “Managing Power on the CN4” on page 8.
To configure the backlight
1 Tap Start > Settings > the System tab > Backlight > the Battery
Power tab.
2 With Turn off backlight if device is not used for checked, select
the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).
You can also use Intermec Settings to configure the backlight
settings. For more information, see “Configuring the CN4
Parameters” on page 48.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 23
Understanding the Status LEDs
The status LEDs above the display show the following information:
.
The Ready-to-Work indicator (blue light) is for SmartSystems
Foundation, which is part of a wireless network using all Intermec
devices. Selected application software programs may also use the
indicator for other purposes. For more information, see “Managing
the CN4 With SmartSystems Foundation” on page 44.
Understanding the LEDs
LED Color Description
Notification Orange The CN4 is notifying you of a pending alarm
or message. For more information on the
Battery Status LED, see “Understanding the
Battery Status LED” on page 6.
Good Read Green The CN4 has successfully decoded a bar code.
Ready-to-Work™
indicator
Blue The CN4 is suspending or resuming with the
display turned off.
Intermec Terminal Emulator (ITE) is running
and connected to the host.
Blinking
blue
ITE is running but not connected to the host.
Off ITE is not installed or not running.
Notification LED
Battery status LED
Good Read LED and
Intermec Ready-to-Work indicator
Note: The blue light may stay on for up to 30 seconds, but will usually
turn off after less than 10 seconds. During this time, do not toggle the
CN4 on or off and do not remove the battery. If the computer seems
to behave erratically, first try warm booting and then cold booting the
CN4 as described in “Resetting the CN4” on page 97.
Chapter 1 — Using the CN4
24 CN4 Mobile Computer User’s Manual
Using the Imager
The CN4 has two available area imagers: EA11 and EA21. The EA11
provides a “laser-like” aimer and is optimized for a scan-intensive
environment. The EA21 provides a laser framer and is optimized for
document imaging. Both area imagers can scan 1D and 2D bar codes.
The following table shows the minimum bar code size supported by
each imager.
The area imager in the CN4 can perform multiple tasks:
Reading bar codes, including 1D, 2D, and composite symbologies
and postal codes. For more information, see the next section,
“Reading Bar Codes.”
Capturing images. Use the imager like a digital camera to take
high-quality, grayscalegrayscale pictures. For more information,
see “Capturing Images” on page 29.
Capturing signatures. Use the imager to “photograph” signatures
on business forms, or to capture onscreen signatures or line
drawings. For more information, see “Capturing Signatures” on
page 32.
EA21 only: Document imaging of full business forms such as bills
of lading or invoices. For more information, see “Capturing
Documents (EA21 only)” on page 32.
Minimum Bar Code Sizes
Imager 1D 2D
EA11 5 mil 5 mil
EA21 6 mil 10 mil
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 25
Reading Bar Codes
The CN4 imager can scan 1D and 2D bar code symbologies,
composite symbologies, and postal codes. You can position the CN4
in almost any orientation to scan a bar code label.
CN4 Imager and Scan Button Locations
Imager window
Side scan
button
Front scan
button
Chapter 1 — Using the CN4
26 CN4 Mobile Computer User’s Manual
CN4e Imager and Scan Button Locations
To read bar codes
1 Press the Power button to turn on the CN4, point the scanner
window a few inches from the bar code label, and hold steady.
2 Press and hold the Scan button. A laser pointer, illumination
beam, and aiming frame turn on.
Imager window
Side scan
button
Front scan
buttons
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 27
3 Center the pointer over the bar code label and move the CN4 so
the bar code fills the aiming frame.
4 When a bar code label is successfully read, the CN4 makes a high
beep and the Good Read LED lights briefly.
5 Release the Scan button.
By default, these bar code symbologies are enabled on the CN4:
Code 39
Code 128/GS1-128
DataMatrix
EAN-8
EAN-13
PDF417
UPC-A
UPC-E
Laser pointer
Chapter 1 — Using the CN4
28 CN4 Mobile Computer User’s Manual
If you are using bar code labels that are encoded in a different
symbology, you need to enable the symbology on the computer. Use
Intermec Settings to enable and disable symbologies. For help, see
“Configuring the CN4 Parameters” on page 48.
Improving Imager Performance
If you experience problems reading bar codes, try some of these tips to
improve the imager performance.
Keep your hand as steady as possible while scanning a label.
Position the imager as close to the bar code as possible while still
being able to capture the entire bar code.
Enable only the bar code symbologies that you need to use every
day.
You can also choose a predefined mode that optimizes imager settings
for different needs or environments.
To choose a predefined mode for the imager
1 Start Intermec Settings. For help, see “Configuring the CN4
Parameters” on page 48.
2 Tap Data Collection > Internal Scanner > Imager Settings >
General and then choose an option from the Predefined Modes
list:
3 Save your settings.
Predefined Mode Select If You Are Scanning:
1D Only 1D labels.
1D and 2D Standard (Default) All types of bar code labels.
1D and 2D Bright
Environment
In high ambient light, such as outdoors in the
sunshine.
1D and 2D
Reflective Surface
Glossy labels.
Custom In conditions that require customized settings.
For complete information about these settings,
commands, and parameters, see the
Intermec Settings Command Reference Manual.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 29
Capturing Images
The Data Collection Resource Kit includes .NET classes you use in
your image capture applications. For more information, see
“Developing Applications for the CN4” on page 72.
The CN4 includes Image Capture, a utility application that
demonstrates this feature.
Using the Image Capture Application
1 Tap Start > Programs > Image Capture.
The Image Capture main screen shows streaming video from the
imager.
2 (Optional) Adjust the Contrast slider for the best image:
For brightly lit environments, move the slider to the right.
For dark areas, move the slider to the left.
Note: For best results, move the slider a little at a time until you
see a change in the onscreen image.
Chapter 1 — Using the CN4
30 CN4 Mobile Computer User’s Manual
3 Point the CN4 at the subject for the image and press Enter. The
image appears.
4 Tap-and-drag to scroll the image.
Tap to zoom in, or tap to zoom out.
To save the image, tap .
To discard the image, tap .
By default, images are saved to the My Documents\ImageCapture
directory on the CN4, with the filename Image_$<image_number>.
After you save or discard an image, the main screen appears and
the CN4 is ready to capture another image.
5 To view saved images, tap Options and choose Gallery.
Tap and to view the images one at a time.
Tap to zoom in, or tap to zoom out.
To discard the image, tap . To discard all saved images, tap
Options and choose Delete All Files.
To exit the Gallery, tap Options and choose Exit Gallery.
6 To close the application, tap ok.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 31
Configuring the Image Capture Application
The default Image Capture settings apply to most situations where
the ambient lighting is adequate for office work. However, you may
need to change those settings depending on the conditions in which
images will be captured, such as outdoors in bright sunlight or inside
a darkened warehouse.
To configure Image Capture settings
1 Tap Options and choose Settings.
2 Change settings as needed. For help, see the next table.
3 Tap Options and choose Save Changes and Exit, or choose
Discard Changes and Exit to abandon your changes.
Image Capture Settings Descriptions
Setting Description
Edge
Enhancement
Adjusts contrast to enhance the edges of objects.
Default is Medium. Too high a setting for the
environment adds noise to the image.
Lighting
Correction
Corrects for inconsistent lighting; for example, if the
edges of the image are much darker than the center,
this feature lightens the edges to match the center.
Default is Disabled.
Noise
Reduction
Reduces noise resulting from edge enhancement.
Range is 0 (default) to 9. Too high a value can cause
banding.
Subsampling Sets the resolution of the image by choosing a ratio. A
ratio of 1:4 means that the processed image will
contain 1 pixel for every 4 pixels in the original image.
The lower the ratio, the larger and more detailed the
image. Range is 1:2 to 1:8. Default is None.
Rotation Rotates the processed image clockwise in 90°
increments. Default is 0 (no rotation).
File Format File type for saved images. Choose either BMP
(default) or JPEG format.
Compression
Quality
Sets JPEG compression quality. Range is 0 to 100%.
Default is 60.
Chapter 1 — Using the CN4
32 CN4 Mobile Computer User’s Manual
Copying Images to Your Desktop PC
You can connect to the CN4 with ActiveSync and browse to the \My
Documents\ImageCapture directory to download image files to your
desktop PC. For help, see “Connecting to a PC” on page 45.
You can also use other automated file transfer methods to copy files.
Integrating Image Capture Into Your Application
You can integrate Image Capture into your own application by calling
it from your application. You can also customize Image Capture
settings by creating and editing the Image Capture configuration .xml
file. For help, see “Integrating Image Capture” on page 76.
Capturing Signatures
A signature capture is a grayscale image of a signature on paper or
other business form. To use signature capture in your applications,
use the SignatureCapture components in the Data Collection
Resource Kit.
Ink capture is the process of saving an onscreen image, such as a
signature or simple line drawing, to a file. To use ink capture in your
applications, use the InkCapture components in the Mobile Gadgets
Resource Kit.
For more information, see “Developing Applications for the CN4”
on page 72.
Capturing Documents (EA21 only)
Use the Intermec Enhanced Mobile Document Imaging (eMDI)
application to capture documents and create electronic files of
printed documents.
Note: The eMDI application places a watermark on the captured
documents until you purchase the eMDI Client Software License
(P/N 454-025-001). For more information, contact your local
Intermec representative.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 33
To use the eMDI application
1 Tap Start > Programs > Document Imaging.
2 Point the CN4 at the document to be captured.
3 Press and hold the Scan button. A laser pointer, illumination
beam, and aiming frame turn on.
Scan button
Chapter 1 — Using the CN4
34 CN4 Mobile Computer User’s Manual
4 Keep the pointer centered on the document and move the CN4 so
the aiming frame approaches the edges of the document.
When the frame stops flashing, the CN4 captures the document.
5 Release the Scan button. The captured image appears.
6 Tap-and-drag to scroll the image.
Tap to zoom in, or tap to zoom out.
To save the image to the Gallery, tap .
To discard the image and try again, tap .
7 To close the application, tap ok.
You can use eMDI as a standalone application, or you can call eMDI
from your own application. For more information, see the Enhanced
Mobile Document Imaging User’s Guide.
You can also access the document capture APIs by using components
in the Data Collection Resource Kit. For more information on
Resource Kits, see “Developing Applications for the CN4” on
page 72.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 35
Using the Color Camera
The optional, 2-megapixel color camera with flash is factory-installed
in the upper back of the CN4, as shown in the following illustration.
Color Camera and Flash Location
You can take photos in either high-resolution or compressed format,
with resolutions up to 1600 x 1200 pixels. When you take a picture,
the images are saved as .jpg files and stored in the /My Documents/
My Pictures folder.
You can use the Pictures & Videos application on the CN4 to take,
view, and edit pictures or record and launch video clips stored on the
CN4 or a storage card. You can also send pictures and video clips to
others or save an image as the background on the Today screen.
Note: The CN4 can be ordered with either a color camera or one of the
the area imagers, but not both.
Camera
Flash
Chapter 1 — Using the CN4
36 CN4 Mobile Computer User’s Manual
After the color camera is enabled, you can configure camera options
by going to Menu > Options or Menu > Tools > Options from the
Pictures & Video screen. While you are in the Pictures & Videos
application, you can select Start > Help for more information on
using the camera.
To take a picture with the camera
1 Tap Start > Programs > Pictures & Videos.
2 Tap the Camera option in the grid or tap Camera in the taskbar.
3 Using the screen display as a viewfinder, move the camera until
you have the image you want to capture.
4 Press Enter to save the image. If you select to save your pictures to
main memory, they are saved to permanent storage on the CN4.
To save picture files
1 Tap Menu > Options > the Camera tab.
2 Select a file save location, type a filename prefix, and select a
compression level.
3 Tap ok.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 37
Installing a miniSD or SIM Card
The miniSD card and SIM card slots are located below a door inside
the CN4 battery compartment.
When the door to the miniSD is opened and closed (for changing,
installing, or removing the SIM or miniSD card), the CN4 performs a
cold boot after you install the battery. For more information, see
“Cold Booting the CN4” on page 98.
To insert a miniSD or SIM card
1 Press the Power button to suspend the CN4, and then remove the
battery. For help with removing the battery, see “Changing the
Battery” on page 4.
2 Remove the two screws on the miniSD/SIM card slot door.
3 Gently lift the door to the card slot.
4 Insert the SIM card or miniSD card as shown in the next
illustrations.
You can corrupt your miniSD card if you do not follow these
installation and removal procedures exactly. Before installing a
miniSD card, inspect the gasket in the compartment for any
damage or wear, and contact your Intermec representative if you
find any damage or wear.
Chapter 1 — Using the CN4
38 CN4 Mobile Computer User’s Manual
5 Close the miniSD/SIM card slot door and insert the two screws.
6 Replace the battery pack and then press the Power button. The
CN4 cold boots.
SIM card
SIM card slot
miniSD card
To prevent damage to the door, do not overtighten the screws
that secure the card slot door.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 39
Setting Up GPS on Your CN4
The integrated Global Positioning System (GPS) receiver in your CN4
delivers standards-based National Marine Electronics Association
(NMEA) data strings to GPS applications. However, Intermec
recommends that you use the GPS Intermediate Driver (GPSID)
instead of directly accessing the GPS hardware. The GPSID is a
Microsoft software component that interacts between applications
and the GPS hardware.
Using the GPSID allows Intermec support for Extended Ephemeris,
which enhances GPS performance by:
reducing the amount of time it takes your GPS receiver to acquire
a fix.
eliminating the need to obtain precise satellite data information
from the GPS satellites.
As a Microsoft software component, the GPSID also:
allows multiple applications to simultaneously access the GPS
data stream.
provides access to GPS data without requiring applications to
recognize and parse NMEA syntax.
Using the GPSID Installed on the CN4
To use the GPSID installed on your CN4, you need to configure the
GPSID settings.
To configure your GPSID settings
1 Tap Start > Settings > the System tab.
Chapter 1 — Using the CN4
40 CN4 Mobile Computer User’s Manual
2 Tap External GPS. The GPS Settings screen appears.
3 On the Programs tab, select the COM port that you want your
programs to use to get GPS data from your CN4.
4 Tap the Hardware tab, and select these settings.
GPS hardware port: COM3
Baud rate: 57600
Note: COM1 and COM3 are reserved.
Chapter 1 — Using the CN4
CN4 Mobile Computer User’s Manual 41
5 Tap the Access tab and select the Manage GPS automatically
check box.
6 Tap ok.
To enable extended ephemeris
1 Tap Start > Settings > the System tab.
2 Tap iGPS settings. The iGPS Settings screen appears.
3 Tap the Advanced tab.
4 Select the Enable extended ephemeris check box.
5 Tap ok.
Chapter 1 — Using the CN4
42 CN4 Mobile Computer User’s Manual
Learning About Additional GPS Options for the CN4
Intermec provides enhanced feature support for the Extended
Ephemeris data capability. For the latest Extended Ephemeris data
files and other CN4 downloads, visit the CN4 downloads page on the
Intermec website at www.intermec.com. For more information
about programming for Extended Ephemeris GPS, visit the Intermec
Developer Library at www.intermec.com/idl.
43
2
Connecting and Configuring the CN4
Use this chapter to understand how to configure the CN4 to
communicate in your network. This chapter contains these
topics:
Managing the CN4 With SmartSystems Foundation
Connecting to a PC
Configuring the Phone
Configuring the CN4 Parameters
Configuring the CN4 for Your Network
Configuring Wireless Security
Chapter 2 — Connecting and Configuring the CN4
44 CN4 Mobile Computer User’s Manual
Managing the CN4 With SmartSystems
Foundation
Intermec's SmartSystems™ Foundation is a software platform that
lets you manage all of your SmartSystems-enabled devices, including
the CN4, simultaneously from a central server. The SmartSystems
console displays all SmartSystems-enabled computers and peripherals
in your network.
Intermec SmartSystems Foundation Console
Through the console, you can:
drag-and-drop configuration bundles, operating system updates,
and firmware upgrades to multiple computers.
save configuration settings from a single device and deploy those
settings to many devices simultaneously.
remotely change settings on SmartSystems-enabled computers
and peripherals.
The SmartSystems console can report on asset locations and battery
status, making it easier to manage your mobile devices.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 45
With an AutoDeploy license, SmartSystems can automatically push
software, configuration settings, and other files to connected CN4s.
The license also enables Scan-to-Connect, which makes connecting
additional CN4s to your wireless network as easy as reading bar codes.
SmartSystems Foundation can be downloaded at no charge from the
Intermec website. For more information, visit
www.intermec.com\SmartSystems. To purchase an AutoDeploy
license, contact your local Intermec sales representative.
Connecting to a PC
You can connect the CN4 to your desktop PC to transfer and
synchronize files, remotely debug applications, and perform other
device management activities. Visit
www.windowsmobile.com\getstarted to learn more about
synchronizing your CN4 with a desktop PC.
Use Microsoft ActiveSync to establish a connection between your
CN4 and PC. ActiveSync can be downloaded for free from Microsoft.
To establish an ActiveSync partnership between your CN4 and PC,
you need to physically connect your CN4 to your PC using:
an AD10 single dock and USB to mini-USB cable.
an AA18 USB adapter and USB cable.
To establish an ActiveSync partnership
1 Download ActiveSync from the Microsoft website and install
ActiveSync on your PC. When installation is complete, the Get
Connected dialog box appears.
2 Follow the onscreen instructions to establish a partnership. When
the partnership is established, the Microsoft ActiveSync screen
appears on your PC.
Chapter 2 — Connecting and Configuring the CN4
46 CN4 Mobile Computer User’s Manual
Configuring the Phone
The CN4 supports two types of cellular phone technology:
CDMA EV-DO Rev A
UMTS and GSM/EDGE
With the radio module installed in the CN4, you can send and receive
telephone calls as well as transmit data through wide-area (WAN)
cellular networks.
The CN4 provides a phone speaker, microphone, and speakerphone.
It also supports Bluetooth headsets or hands-free kits.
By default the phone is enabled. After you activate the phone, you can
customize the features of the phone and network settings. For help,
refer to the Windows Mobile help on your CN4.
Activating the CDMA Phone
The CDMA WAN radio module is installed at the factory. To activate
your CDMA CN4, contact the carrier you have chosen and set up
accounts for each device. The following table lists the carriers that
Intermec currently supports. If your carrier is not listed in the table,
please contact Intermec product support to see if it is now supported.
The carrier will require the Electronic Serial Number (ESN) to start
the activation process. You can find the ESN:
on a label located in the upper right corner of the battery
compartment.
on the outside of the CN4 shipping box.
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Intermec representative can guide
you through the process.
Currently Supported Carriers
Country Carrier
United States Sprint, Verizon
Canada Bell Mobility
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 47
After you supply the ESN to your carrier, they will respond with values
that you must enter using the Windows Mobile Activation Wizard (if
required). Some of the supported carriers do not require you to enter
any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate
your phone.
After activation, the settings are permanently stored in the CDMA
module. Changing the OS or SSPB loads will not affect any of the
settings or activation parameters stored in the WAN modem.
To start the Activation Wizard
1 Tap Start > Phone.
2 In the Phone application, tap Menu > Activation Wizard.
Values Required for CDMA Phone
Carrier Activation Method Activation Values You Need
Bell Mobility Activation Wizard Service Programming Code (SPC), also called the
activation code
Mobile Directory Number (MDN)
Mobile Station Identification Number (MSIN)
System ID (SID)
Network ID (NID)
Mobile Country Code (MCC)
Mobile Network Code (MNC)
Username
Password
Sprint Activation Wizard Master Subsidy Lock (MSL), also called the activation
code
MDN
Mobile Station Identifier (MSID)
Telecom
New Zealand
Activation Wizard SPC
SID
NID
Verizon Dial *22899, or
Activation Wizard
None - all parameters are automatically transferred
wirelessly.
Chapter 2 — Connecting and Configuring the CN4
48 CN4 Mobile Computer User’s Manual
Activating the GSM/EDGE Phone
You use a SIM card to activate the GSM/EDGE phone on the CN4.
You can purchase the SIM card from your network provider.
To activate the GSM/EDGE phone
Install the SIM card in the CN4. For help, see “Installing a
miniSD or SIM Card” on page 37.
You may need to configure network settings for your provider. For
information, tap Start > Help and see the procedures in the Windows
Mobile online Help. Or, contact your network provider.
Making a Phone Call
After you activate your phone, you are ready to start making phone
calls.
To make a phone call
1 Tap Start > Phone.
2 Tap the keys to enter the telephone number you want to call.
3 Tap the Talk button.
Turning the Phone On and Off
Use the iConnect utility to turn the phone on or off. For help, see
“Managing Network Connections With iConnect” on page 58.
Configuring the CN4 Parameters
You can configure many parameters on the CN4 such as the bar code
symbologies it decodes or the network settings. The values you set for
these parameters determine how the CN4 operates.
Operating parameters can be viewed and changed on the CN4 by
using the Intermec Settings application on the computer. There are
two ways to access Intermec Settings:
Remotely via Intermec SmartSystems Foundation. When you use
SmartSystems, you can remotely configure all your CN4
computers as well as other SmartSystems-enabled Intermec
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 49
computers and peripherals. For more information, see the next
section.
Directly on the CN4. Using Intermec Settings on the CN4 changes
only the settings on that computer. For more information, see
“Using Intermec Settings Directly On the CN4” on page 50.
You can use a third-party device management product that
includes Intermec Settings Configuration Support, such as the
Microsoft System Center Mobile Device Manager.
Visit http://www.microsoft.com/systemcenter/mobile for
more information.
You can also configure the CN4 with configuration bundles that you
create using SmartSystems Foundation. For more information, see
the SmartSystems Foundation online Help.
Using Intermec Settings Remotely With SmartSystems
Foundation
Your CN4 is SmartSystems-enabled, which lets you open Intermec
Settings from the SmartSystems console to remotely configure all of
your CN4 computers.
For more information on SmartSystems, see “Managing the CN4
With SmartSystems Foundation” on page 44.
To open Intermec Settings from the SmartSystems console
1 In the SmartSystems console, right-click a CN4.
Chapter 2 — Connecting and Configuring the CN4
50 CN4 Mobile Computer User’s Manual
2 Select Intermec Settings.
3 Change settings as needed. As you choose parameters, information
on each parameter appears in the upper right-hand pane of the
Intermec Settings browser.
4 When you are done making changes, choose File > Save Settings.
For help with using Intermec Settings, in the browser click Help >
Contents.
For information on all parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
Using Intermec Settings Directly On the CN4
You can use Intermec Settings on the CN4 to configure the computer
and view system information.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 51
To use Intermec Settings
1 On the CN4, tap Start > Settings > the System tab > Intermec
Settings.
2 Tap a menu bar. A new menu or a list of configurable items
appears.
3 In a list of configurable items, choose or change options by
entering data in the entry fields or checking the appropriate check
box.
To restore the default settings to all items in the current menu,
tap Menu > Restore Menu Defaults. Tap Yes to clear the
confirming message and restore menu defaults.
To restore all default settings, tap Menu > Restore All
Defaults. Tap Yes to clear the confirming message and restore
all defaults, which may take a few minutes.
4 Tap Back or to save your changes and go back to the previous
screen.
Tap to return to the main menu.
5 To close Intermec Settings, in the main menu tap ok or choose
Menu > Exit.
For more information on all parameters in Intermec Settings, see the
Intermec Settings Command Reference Manual.
Chapter 2 — Connecting and Configuring the CN4
52 CN4 Mobile Computer User’s Manual
Hiding Menu Items in Intermec Settings
In Intermec Settings, you can hide items in the CN4 menus, or in the
directory tree in the SmartSystems console. Hidden items are not
saved when you back up your settings in the SmartSystems console.
In Intermec Settings in the SmartSystems console:
To hide menu items, right-click a menu item and choose Hide
Menu Item from the popup list. Click Yes to clear the confirming
message.
To restore menu items, click the CN4 name at the top of the
directory tree to select it, and then choose View > Unhide Items.
All hidden menu items are restored.
In Intermec Settings on the CN4:
To hide menu items, tap and hold the item, and then choose Hide
Menu Item from the popup list. Tap Yes to clear the confirming
message.
To restore hidden items in a single menu, tap and hold the menu
bar where the item was hidden, and then choose Restore Item
Default from the popup list.
To restore all hidden items in all menus, tap Menu > Unhide All
Items.
Configuring the CN4 for Your Network
You can easily add the CN4 to your wireless or wired data collection
network. You can connect your CN4 using:
802.11b/g radio communications.
Ethernet communications.
Bluetooth communications.
USB and serial communications.
Note: When you restore default settings in Intermec Settings, only the
settings for visible items are restored to defaults. The settings for
hidden menu items are not affected. For more information, see the
SmartSystems Foundation online Help.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 53
Configuring 802.11b/g Radio Communications
Your CN4 has an 802.11b/g radio to transfer data using wireless
communications and supports the TCP/IP network protocols. This
section of the manual assumes that your wireless network is set up,
including your access points.
To use wireless communications in a TCP/IP network
1 Configure these parameters on each CN4 in the network:
Network name (SSID)
IP settings (if not using DHCP)
2 Make sure your CN4 is talking to the network and that the
network can see your CN4. For more information, see “Managing
Network Connections With iConnect” on page 58.
3 Configure security. For help, see “Configuring Wireless
Security” on page 59.
Configuring Ethernet Communications
You connect your CN4 to your Ethernet network with an Ethernet
cable and one of these accessories:
AD10 single dock with an Ethernet/modem (AA12/AA13) adapter
AD11 Ethernet multidock
AA16 Ethernet snap-on adapter
To use your CN4 in an Ethernet network
1 Connect the CN4 to an Ethernet network with an AD10, AD11, or
AA18. Ethernet communication is enabled by default on the CN4.
2 Configure these network parameters:
If you have a DHCP server, enable DHCP.
If you do not have a DHCP server, set these parameters:
a IP address
Make sure all components with antennas are at least 30 cm (1 ft)
apart when power is applied. Failure to comply could result in
equipment damage.
Chapter 2 — Connecting and Configuring the CN4
54 CN4 Mobile Computer User’s Manual
b Subnet mask
c Default router
3 If necessary, set these parameters:
Primary and secondary DNS servers
Primary and secondary WINS servers
4 Make sure that your CN4 is communicating with the network and
that the network can see your CN4. For more information, see
“Managing Network Connections With iConnect” on page 58.
Configuring Bluetooth Communications
Your CN4 is Bluetooth™ enabled, which lets you connect to other
Bluetooth devices, such as scanners, printers, or audio devices.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
Use Intermec Settings to enable the radio and configure other
Bluetooth settings as described next.
To turn on the Bluetooth radio and configure Bluetooth settings
1 Start Intermec Settings.
2 Choose Communications > Bluetooth.
3 Choose On from the Power menu. A message appears asking if you
want to save the new settings.
4 Choose Yes. Intermec Settings refreshes the settings and returns
you to the main menu.
5 (Optional) To make the CN4 visible to other Bluetooth devices,
choose Communications > Bluetooth and choose Enable from
the Discoverable menu.
To make the CN4 connectable to other Bluetooth devices that
discover it, choose Communications > Bluetooth and choose
Enable from the Connectable menu.
6 Click OK.
The Bluetooth radio maintains its state through a warm or cold boot
and maintains virtual COM ports. But, if you clean boot your CN4
you need to recreate pairings to devices.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 55
Connecting to a Bluetooth Scanner
You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, by using the Wireless Scanning enabler.
To use the Wireless Scanning enabler
1 Tap Start > Settings > the System tab > Wireless Scanning.
2 Tap Add Device.
3 To add a scanner by scanning a bar code on the CN4:
a Tap Quick Connect and then tap Next.
b Scan the bar code with the scanner and then tap Finish.
To search for scanners:
a Tap Search and then tap Next. The CN4 looks for scanners,
and the Bluetooth device names of found scanners appears in
the list.
b Tap the scanner device name in the list and then tap Next. The
scanner is paired with the CN4.
To manually add a scanner:
a Tap Manual and then tap Next.
b Enter the Bluetooth address of the scanner in the entry field.
c Tap Next. The scanner is paired with the CN4.
Chapter 2 — Connecting and Configuring the CN4
56 CN4 Mobile Computer User’s Manual
Connecting to a Bluetooth Printer
1 Choose Start > Settings > the System tab > Wireless Printing.
2 To search for printers:
a Tap Search. The CN4 looks for printers, and the Bluetooth
device names and addresses of found printers appear in the list.
b Tap a printer device name in the list to select it, and then tap
Set.
To manually add a printer:
Tap Manual, enter the Bluetooth device address for the printer
in the entry field, and then tap Set.
3 (Optional) Tap Print Test Page. The printer prints out a test page.
After you configure Bluetooth wireless printing, you can use an
application that opens the wireless printing COM port on your CN4.
For help with developing applications, see the Bluetooth Resource
Kit, part of the Intermec Developer Library (IDL), available from the
Intermec website at www.intermec.com/idl.
Note: You can also print wirelessly using Microsoft APIs with
Bluetooth extensions for Winsock and Bluetooth virtual COM ports.
For help, see the Bluetooth Resource Kit documentation.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 57
Connecting to a Bluetooth Audio Device
Use the Bluetooth Audio enabler to discover, activate, and connect to
Bluetooth audio devices such as a headset. This enables system
sounds to be monitored through the headset.
To connect to a Bluetooth audio device
1 Select Start > Settings > the System tab > Bluetooth Audio. The
Bluetooth Audio screen appears.
2 Follow the onscreen instructions to connect to a Bluetooth audio
device.
Using Serial and USB Communications
You can use these CN4 accessories to transmit data to and receive data
from another device through serial or USB communications:
AD10 single dock
AV6 vehicle dock (AV9 for CN4e)
AA18 USB adapter
AA17 RS-232/DEX adapter
For more information about these accessories and how to order them,
see Accessories” on page 109.
Chapter 2 — Connecting and Configuring the CN4
58 CN4 Mobile Computer User’s Manual
Managing Network Connections With iConnect
After you configure 802.11 or Ethernet network settings, you can use
the iConnect utility to:
check the network connection status with a ping test.
change basic network parameters.
change Funk security profile settings.
turn the 802.11 radio, Ethernet, phone, or Bluetooth radio on and
off.
To turn a network connection on or off
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Enable and then choose a network connection from the
list. A check mark next to the connection type indicates that the
connection is enabled.
To configure or change wireless security profile settings
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Wireless Settings. The Profile Wizard appears.
3 Choose a profile from the Profile list and change settings as
needed. For more information, see “Selecting a Funk Security
Profile” on page 61.
To configure or change wireless or Ethernet network settings
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Wireless IP Settings or Ethernet IP Settings. A
dialog box appears that shows the current settings for the wireless
or Ethernet network adapter.
3 Change settings as needed and click ok.
To check the connection status with a ping test
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Tools > Ping Test.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 59
3 Choose Ethernet or Wireless from the connection type list.
4 Choose Ping my gateway or DHCP server if you are using
DHCP. Or, choose Ping the host address below and enter the
host address in the entry field.
5 Tap Ping. The ping test runs and checks your connection. If the
connection is OK, “Connection Validated” appears.
To check overall connection status
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen.
2 Choose Status > Ethernet or Wireless. A message box appears.
iConnect checks these items in order:
Network connection (Ethernet or wireless) enabled
MAC address of the CN4 network adapter
MAC address of the associated host
IP address of the CN4
Ping Status
3 Tap Try Again to test the connection again.
If you are having trouble with your wireless connection, you can use
iConnect to verify available access points and networks, check signal
strength, and view other diagnostics. For help, see “Checking 802.11
Network Status” on page 94.
Configuring Wireless Security
The CN4 provides four types of security for your wireless network:
Wi-Fi Protected Access 2 (WPA2™)
Wi-Fi Protected Access (WPA)
802.1x
WEP
Note: If you choose Exit iConnect from the menu, the desktop icon
disappears. To restore the iConnect desktop icon, warm boot the
CN4.
Chapter 2 — Connecting and Configuring the CN4
60 CN4 Mobile Computer User’s Manual
This section explains how to configure wireless security on your CN4.
If you choose not to use security, see “Disabling Security” on
page 70. Intermec recommends that you always implement security.
You must use either Funk or Microsoft security to implement your
security solution. For details, see the next section, “Choosing
Between Microsoft and Funk Security.”
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this
section also assumes that your authentication server and
authenticators are properly configured.
Choosing Between Microsoft and Funk Security
The CN4 supports both Funk and Microsoft security, which
dynamically select wireless networks based on your preferences. The
option you choose depends on your network security needs.
If you are using the CN4 in a static environment that requires a
high level of security, you should use Funk security, which offers
these additional features:
CCX v4.0 compliance
Support for LEAP and TTLS
Configuration of up to four profiles
To use Funk security, you need to select a profile. For help, see the
next section, “Selecting a Funk Security Profile.”
If you are primarily using the CN4 to connect to WiFi hotspots,
you may want to use Microsoft security.
To use Microsoft security, you need to select it as your security
choice. For help, see “Selecting Microsoft as Your Security
Choice” on page 65.
Note: Your security choice does not depend on your authentication
server. For example, you can choose Funk security if you use Microsoft
Active Directory® to issue certificates.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 61
Selecting a Funk Security Profile
You can define up to four profiles for Funk security. Different profiles
let your CN4 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the
warehouse. By default, the active profile is Profile 1.
To select a Funk security profile
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Choose a profile. A list of configurable settings appears.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Set an active profile by choosing it in the Active Profile list.
8 Save your settings.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or
WPA2-PSK security on your CN4 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2. Encryption
automatically defaults to TKIP or AES, respectively.
Note: You can also use the Profile Wizard to configure most wireless
security settings. To start the Profile Wizard, tap the iConnect icon
( ) in the lower right corner of the Today screen and select Tools >
Wireless Settings.
Chapter 2 — Connecting and Configuring the CN4
62 CN4 Mobile Computer User’s Manual
7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
8 If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
b Enter a User Name and User Password.
c For Validate Server Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CN4. For help, see
“Loading a Certificate” on page 68.
b Enter a User Name and Subject Name.
c For Validate Server Certificate, choose Yes.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
9 Save your settings.
To configure WPA or WPA2 with Funk security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2.
7 For 8021x, choose None.
Note: You can use Prompt for Credentials to troubleshoot
your network connection.
Note: The correct date must be set on your CN4 when you
enable Validate Server Certificate.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 63
8 For Pre-Shared Key, enter the pre-shared key or passphrase.
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the access point. The passphrase must be from 8 to 63 characters.
After you enter a passphrase, the CN4 internally converts it to a
pre-shared key.
This value must match the passphrase on the authenticator.
9 Save your settings.
Configuring 802.1x Security With Funk Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open.
7 For Encryption, choose WEP.
8 For 8021x, choose TTLS, PEAP, or TLS.
9 If you chose TTLS or PEAP:
a Enter a User Name.
b For Prompt for Credentials, choose Enter credentials now.
c Enter a User Password.
d For Validate Server Certificate, choose Yes.
If you choose TLS:
a Load a user and root certificate on your CN4. For help, see
“Loading a Certificate” on page 68.
b For Validate Server Certificate, choose Yes.
c Enter a User Name and Subject Name.
Note: You can use Prompt for Credentials to troubleshoot
your network connection.
Chapter 2 — Connecting and Configuring the CN4
64 CN4 Mobile Computer User’s Manual
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
10 Save your settings.
Configuring LEAP Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For 8021x, choose LEAP.
7 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA,
AES if you choose WPA2, and WEP if you choose Open or
Network EAP.
8 For Prompt for Credentials, choose Enter credentials now.
9 Enter a User Name and User Password.
10 Save your settings.
Configuring Static WEP Security With Funk Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose Open.
7 For Encryption, choose WEP.
8 For 8021x, choose None.
9 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 65
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5- byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
10 For Transmit key, choose the key you want to use for
transmitting data.
11 Save your settings.
Selecting Microsoft as Your Security Choice
The default security setting is Funk. If you want to use Microsoft
security, you need to select it as your security choice. After you select
Microsoft as your security choice, you will be prompted to save your
settings and reset your CN4 for your change to take effect.
With Microsoft as your security choice, you can configure:
WPA
802.1x
Static WEP
To select Microsoft security
1 Start Intermec Settings. For help, see “Configuring the CN4
Parameters” on page 48.
2 Choose Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security. An alert
box appears telling you that you must save your settings and warm
boot the CN4 for the new security choice to take effect.
4 Choose Yes. The CN4 resets and starts with Microsoft Security as
the Security Choice.
Configuring WPA Security With Microsoft Security
Use these procedures to set WPA-802.1x and WPA-PSK security on
your CN4 with Microsoft security.
To enable WPA-802.1x with Microsoft security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
Chapter 2 — Connecting and Configuring the CN4
66 CN4 Mobile Computer User’s Manual
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA. Data Encryption
automatically defaults to TKIP.
6 For 802.1x Authentication, choose either MD5, TLS, or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and Domain and press Enter.
If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Choose Validate Server and press Enter. When the radio
starts to authenticate, the Network Password dialog box
appears.
c Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
8 Save your settings.
To enable WPA-PSK with Microsoft security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
3 Choose
Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
6 For Pre-Shared Key, enter the pre-shared key or the passphrase.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 67
The pre-shared key must be a value of 32 hex pairs preceded by 0x
for a total of 66 characters. The value must match the key value on
the authenticator. The passphrase must be from 8 to 63
characters. After you enter a passphrase, the CN4 internally
converts it to a pre-shared key.
This value must match the passphrase on the authenticator.
7 Save your settings.
Configuring 802.1x Security with Microsoft Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose Open.
6 For Data Encryption, choose WEP.
7 For 802.1X Authentication, choose TLS or PEAP.
8 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and a Domain.
If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Select Validate Server and press Enter. When the radio starts
to authenticate, the Network Password dialog box appears.
c Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the domain.
e Press Enter.
Chapter 2 — Connecting and Configuring the CN4
68 CN4 Mobile Computer User’s Manual
9 For Network Key Setting, choose Automatic.
10 Save your settings.
Configuring Static WEP Security With Microsoft Security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Network Authentication, choose Open.
5 For Data Encryption, choose WEP.
6 For Network Key Setting, choose Enter Key and Index.
7 For Network Key Value, enter an ASCII key or a hex key that is
either 5 bytes or 13 bytes long depending on the capability of the
radio.
Set a 5-byte value for 64-bit WEP or a 13-byte value for 128-bit
WEP. Hex keys must be preceded by 0x and contain 5 or 13 hex
pairs.
8 For Network Key Index, select the key you want to use for data
transmission.
9 Save your settings.
Loading a Certificate
To use transport layer security (TLS) with WPA or 802.1x security, you
need a unique client certificate on the CN4 and a trusted root
certificate authority (CA) certificate. Certificates are pieces of
cryptographic data that guarantee a public key is associated with a
private key. They contain a public key and the entity name that owns
the key. Each certificate is issued by a certificate authority.
To import a root certificate
1 Tap the iConnect icon ( ) in the lower right corner of the Today
screen. The iConnect pop-up menu appears.
2 Select Tools > Wireless Settings. The Profile Wizard appears.
Chapter 2 — Connecting and Configuring the CN4
CN4 Mobile Computer User’s Manual 69
3 Tap Edit Selected Profile > the Security tab > Get Certificates.
4 To import a root certificate:
a Tap the <<< button next to the Import Root Certificate field
to select the root certificate (DER-encoded .cer file) to import.
b Click Import Root Cert to install the selected certificate.
5 To import a user certificate:
a Tap the <<< button next to the Certificate Path field to select
the user certificate (DER-encoded .cer file without the private
key) to import.
b Tap the <<< button next to the Key Path field to select the
private key (.pvk file) which corresponds to the user certificate
you selected.
6 To import a certificate from an IAS server:
a Tap Web Enrollment.
b Enter the User, Password, and Server (IP address) to log into
the server.
c Tap OK. A dialog box appears asking if you want to load the
root certificate.
Note: PFX encoded certificates are also supported. Tap the
Import pfx button to import a PFX encoded certificate.
Chapter 2 — Connecting and Configuring the CN4
70 CN4 Mobile Computer User’s Manual
d Tap OK. The Enrollment Tool message box appears telling you
that the certificate has been added.
e Tap OK to close the message box.
Disabling Security
If you choose not to use security with your wireless network, you can
disable it on the CN4. Intermec recommends that you always set
security in your network.
To disable security
1 Start Intermec Settings. For help, see “Configuring the CN4
Parameters” on page 48.
2 Choose Communications > 802.11 Radio > Security Choice and
select Microsoft Security. An alert box appears telling you that
you must save your settings and warm boot the CN4 for the new
security choice to take effect.
3 Choose Yes. The CN4 resets and starts with Microsoft Security as
the Security Choice.
4 Start Intermec Settings.
5 Choose Communications > 802.11 Radio > Microsoft Security.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose Disabled.
8 Tap OK. Your settings are saved.
71
3
Developing and Installing Applications
Use this chapter to understand the guidelines for developing
applications and installing them on the CN4. This chapter
contains these sections:
Developing Applications for the CN4
Installing Applications on the CN4
Launching an Application Automatically
Integrating Image Capture
Freeing Up Virtual Memory for Applications
Upgrading the System Software
Chapter 3 — Developing and Installing Applications
72 CN4 Mobile Computer User’s Manual
Developing Applications for the CN4
Use the Intermec Resource Kits to develop applications to run on the
CN4. The Resource Kits are a library of C++, .NET, Java, and web
components grouped by functionality that you can use to create
applications for the computer. The Resource Kits are part of the
Intermec Developer Library (IDL), and can be downloaded from the
Intermec website at www.intermec.com/idl.
For more information, see the Intermec Developer Library Resource
Kit Developer’s Guide.
Packaging Your Application
For very simple applications, the executable file may be the only file
you need to deploy. More typically, you will have a set of files to
install.
For Windows Mobile applications, Intermec recommends creating a
.cab file to install your application. The CN4 uses standard Windows
Mobile .cab files and will install third-party .cab files.
Choosing a Target Location for the Application
You can have your .cab file place your application in any of these
memory locations on the CN4:
The ObjectStore, which is RAM that looks like a disk.
The optional miniSD card. Depending on available disk space, you
may want to consider installing your application files on the
miniSD card. Using a card creates the Storage Card folder on the
CN4.
The non-volatile Flash File Store. Applications and data in the
Flash File Store will persist through a clean boot.
Note: The Flash File Store may be erased if you reflash the image.
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 73
If you need to cold boot the CN4, files copied to any of these locations
are safe as long as the AutoRun system is installed in the appropriate
location. When AutoRun is installed on the CN4, all .cab files in the
CabFiles folder are automatically extracted after a cold boot. For more
information about AutoRun, see the Intermec Developer Library
Resource Kit Developer’s Guide.
When you clean boot the CN4, all applications and data files in the
ObjectStore are erased. The CN4 loads only the default files and
programs required by the CN4 operating system. If you want to keep
your applications (and configurations) during a clean boot, make sure
that the _sstransferagent.xml is updated and is in this directory:
\Flash File Store\UserAutoInstall
During the clean boot, the CN4 runs this .xml file once and the
specified files in the Flash File Store are copied to the CabFiles folder,
and then they are run.
Installing Applications on the CN4
You can install files and applications on the computer by using:
SmartSystems Foundation.
Microsoft ActiveSync.
a miniSD card.
the CN4 FTP server.
For more information on installing applications, see the Intermec
Developer Library Resource Kit Developer’s Guide.
Installing Applications Using SmartSystems Foundation
Console
You can use the SmartSystems console to drag-and-drop Intermec
applications onto your CN4. The console is part of SmartSystems
Foundation. For more information, see “Managing the CN4 With
SmartSystems Foundation” on page 44.
To use SmartSystems console to install an application
1 Download your application file from the Intermec website and
unzip it on your desktop PC.
Chapter 3 — Developing and Installing Applications
74 CN4 Mobile Computer User’s Manual
2 Double-click the application file to install it. The application file
should appear in the Software Vault.
3 From the SmartSystems console in the Software Vault, drag-and-
drop the application onto each CN4 in your network, or drop the
application on a group of CN4s contained in a folder.
You can also use SmartSystems Scan-to-Connect to connect the CN4
to your network and install software. For more information, see the
SmartSystems Foundation console online Help.
Installing Applications Using Microsoft ActiveSync
When you only have a few computers to update with applications, you
can copy files using Microsoft ActiveSync.
This procedure assumes that Microsoft ActiveSync is installed on
your PC and is up and running. For more information on installing
and using ActiveSync, see “Connecting to a PC” on page 45.
To install an application on the computer using ActiveSync
1 Connect to the CN4 via ActiveSync.
2 Copy the .cab files from your development PC to the CN4.
3 Warm boot or cold boot the CN4.
4 After the boot process is finished, browse to the .cab files and tap
the files to install them.
Installing Applications Using a Storage Card
For information on installing the miniSD card in the CN4, see
“Installing a miniSD or SIM Card” on page 37.
To install applications using the storage card
1 Copy your application file to the miniSD card.
2 Install the miniSD card in the CN4.
3 On your CN4, browse to the Storage Card folder and run your
application.
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 75
Installing Applications Using the FTP Server
The CN4 has a built-in FTP server that connects to a network through
Ethernet, 802.11 b/g, or WAN (Wireless Access Network). You can use
the server to transfer your application file to the computer. Because
you can create FTP scripts to automate the process of copying files to
the computer, this option is useful when you need to send files to a
large number of computers.
The easiest way to manage the FTP server is to enable the FTP menu
within iConnect.
To enable the FTP menu
Create this DWORD registry key and set it to a value of 1:
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\ShowFTPMenu
The iFTP menu is available the next time you start iConnect.
To manage the state of the FTP server
Modify these existing registry keys:
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpAutoStart
HKEY_CURRENT_USER\Software\iConnect2\IConnect\Settings\FtpHeartbeat
where 1 = enable and 0 = disable.
Launching an Application Automatically
There are two ways to automatically launch your application when
you perform a reset on the computer:
Make sure your .cab file places a shortcut to your application in
the \Windows\StartUp folder.
Configure the AutoRun program to launch your application.
The computer contains a program called AutoRun.exe which
automates operations such as launching other processes. You can
configure AutoRun.exe through the AutoRun data file, AutoRun.dat.
For compatibility with other Intermec computers, you can place a
copy of AutoRun.exe in the same folder as your AutoRun.dat file but
it is not required.
Chapter 3 — Developing and Installing Applications
76 CN4 Mobile Computer User’s Manual
To create and install the AutoRun.dat file on your computer
1 Create a folder called System on your CN4.
2 Open the Notepad application on your PC.
3 Write commands for AutoRun.dat using the supported AutoRun
script commands.
4 Save the Notepad file as AutoRun.dat.
5 Copy the AutoRun.dat file to the System folder on the CN4.
During every boot, the system scans for AutoRun.dat in the
System folder.
AutoRun supports the following script commands in AutoRun.dat:
AutoRun handles quoted file names for the first parameter, which
allows you to specify path names or file names that contain white
spaces. AutoRun only supports one set of quotes per command.
For more information on AutoRun, see the Intermec Developer
Library Resource Kit Developer’s Guide.
Integrating Image Capture
The Image Capture application on your CN4 provides a way to
capture high-resolution grayscale images. You can integrate Image
Capture into your own applications to take advantage of this feature.
Calling Image Capture From Your Application
To integrate Image Capture features into your existing mobile
application, you need to specify two parameters:
AutoRun Script Commands
Command Description
EXEC Launches a specified program and waits for it to finish
(up to 10 minutes)
CALL Processes a specified file of commands and returns.
CHAIN Processes a specified file of commands and does not
return.
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 77
Path to and name of the Image Capture application. Default is
“\\Program Files\\Intermec\\ImageCapture\\ImageCapture.exe”.
Path to and name of the .xml configuration file that Image
Capture should use when called by your application. This way you
can use a custom .xml configuration file based on your needs. If no
.xml file is specified, Image Capture uses its default settings, or
looks for an .xml file in its local directory.
This sample code calls Image Capture from its default location and
specifies “ImageCapture_Config.xml” as the custom .xml
configuration file to use:
try
{
System.Diagnostics.Process.Start("\\ProgramFiles\\ImageCapture
\\ImageCapture.exe","\"\\Program Files\\MyApp\\ImageCapture_
Config.xml\"");
}
catch (Exception exception)
{
MessageBox.Show("Failed to execute \\ProgramFiles\\ImageCapture
\\ImageCapture.exe” + "\r\n" + exception.ToString());
}
Creating and Editing the Image Capture XML File
To further customize Image Capture features for use in your
application, you can create or edit the Image Capture .xml file. This
section lists Image Capture field names, valid values, and descriptions.
Field Definitions for ImageCapture_Config.xml
Field Name Valid Values Description
Settings
allowChanges True or false Default is true. When set to false, user cannot change
any settings.
allowGallery True or false Default is true. When set to false, user cannot go to
the Gallery screen.
Chapter 3 — Developing and Installing Applications
78 CN4 Mobile Computer User’s Manual
Conditioning
Settings
allowChanges True or false Default is true. When set to false, user cannot change
settings in the Conditioning tab.
Edge Enhancement
allowChanges True or false Default is true. When set to false, user cannot change
the edge enhancement setting.
edgeEnhancement None, low, medium,
or high
Default is None. If no value is provided, the edge
enhancement value is unchanged.
Lighting Correction
allowChanges True or false Default is true. When set to false, user cannot change
the lighting correction setting.
lightingCorrection True or false Default is true. If no value is provided, the
application cannot change the lighting correction
value.
Noise Reduction
allowChanges True or false Default is true. When set to false, user cannot change
the noise reduction setting.
noiseReduction 0 to 9 Default is no value. If no value is provided, the
application does not change the noise reduction
setting.
Image Rotation
allowChanges True or false Default is true. When set to false, user cannot change
the rotation setting.
imageRotation None, 90, 180, 270 Default is no value. If no value is provided, the
application does not change the rotation value.
Subsampling
allowChanges True or false Default is true. When set to false, user cannot change
the subsampling rate.
subSampling None, 1:2, 1:3, 1:4,
1:5, 1:6, 1:7, 1:8
Default is no value. If no value is provided, the
application does not change the subsampling rate.
Storage Settings
allowChanges True or false Default is false. If set to true, user can change
settings in the Storage tab.
Field Definitions for ImageCapture_Config.xml (continued)
Field Name Valid Values Description
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 79
Image Location
allowChanges True or false Default is false. If set to true, user can change the
directory where saved images are stored.
imageLocation File path Default is no value. If no value is provided, the
application does not change the directory where
saved images are stored (My Documents\
ImageCapture).
File Name
allowChanges True or false Default is false. When set to true, user can change
the filename template setting.
fileName String of up to 200
characters
Name to be used for saved image files. If the name is
identical to a file already saved, Image Capture adds
a numeric character to the end of the file name.
Output
Compression
allowChanges True or false Default is false. When set to true, user can change
the file format type.
fileFormat BMP, JPEG Default is no value. If no value is provided, Image
Capture does not change the file format setting. If
no format is selected, the file is saved as a .bmp.
Compression
Quality
allowChanges True or false Default is false. When set to true, user can change
the compression quality setting.
compressionQuality 0% to 100$ Default is no value. If no value is provided, the
application does not change the compression quality
setting. The higher the value, the better the quality,
and the larger the file size will be. If fileFormat is set
to BMP, this setting is not used.
Field Definitions for ImageCapture_Config.xml (continued)
Field Name Valid Values Description
Chapter 3 — Developing and Installing Applications
80 CN4 Mobile Computer User’s Manual
Image Capture XML Example
This XML demonstrates how to use the fields as defined in the
previous section.
<?xml version="1.0" encoding="utf-8" ?>
<ImageCapture xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Settings allowChanges ="true" allowGallery="true">
<Conditioning allowChanges="true">
<edgeEnhancement allowChanges="true">None</edgeEnhancement>
<lightingCorrection allowChanges="true">Enabled</lightingCorrection>
<noiseReduction allowChanges="true">0</noiseReduction>
<imageRotation allowChanges="true">90</imageRotation>
<subsampling allowChanges="true">None</subsampling>
</Conditioning>
<Storage allowChanges="true">
<imageLocation allowChanges="false">\My Documents\ImageCapture
</imageLocation>
<fileName allowChanges="false">
Image_$(num)</fileName>
</Storage>
</Settings>
</ImageCapture>
Freeing Up Virtual Memory for Applications
You can use the InstallSelect application to free up virtual memory
and create more space to load and run custom applications.
When you free up virtual memory, you reduce the amount of virtual
memory used by portions of the SmartSystems Platform Bundle
(SSPB) by removing value-added software features. Be sure to close all
other applications and back up any related files before you use
InstallSelect. For more information on SSPB, see “Upgrading the
System Software” on page 82.
Note: InstallSelect is designed for use only by administrators,
developers, integrators, or Intermec service representatives.
Removing software features may result in loss of computer
functionality or the ability to manage device settings. Contact
your Intermec service representative for information about each
software feature before making changes.
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 81
To free up virtual memory
1 Go to Start > Programs > File Explorer.
2 Browse to the Windows folder and scroll down to find
InstallSelect.
3 Tap InstallSelect. A Caution message appears, reminding you that
removing files may reduce functionality.
4 Tap OK to clear the message. The InstallSelect screen appears.
5 Clear the check box for each component you do not want installed
after a clean boot. For a description of each component, see the
next table.
6 Tap Apply to start the clean boot. A confirming message appears.
7 Tap Yes to continue. The CN4 performs a clean boot. Only the
components you selected are installed.
InstallSelect Software Components
Component Name Description
Avalanche Enabler Enables the client to the Wavelink Device
Management solution.
Data Collection &
Intermec Settings
Enables data collection components, including
the scanner and decode engines, and Intermec
Settings. Also includes on-unit SDK libraries.
Funk Wireless Security Intermec security supplicant that provides a
wireless security solution with several features
that are not supported by Microsoft.
Chapter 3 — Developing and Installing Applications
82 CN4 Mobile Computer User’s Manual
Depending on the options installed in your CN4, you may see other
components available from the InstallSelect application.
Upgrading the System Software
When you upgrade your computer, you are updating the operating
system (OS) and the SmartSystems Platform Bundle (SSPB) files.
You can choose to upgrade only the operating system. If you upgrade
only the operating system, you will need to reinstall the SSPB files.
SSPB files are stored in the Flash File Store and deliver Intermec
value-add (IVA) functionality such as data collection, configuration,
Intermec Bluetooth integration, the Intermec wireless security suite,
and the SmartSystems Reference Client. As new features are added to
these components, you can update your SSPB files without updating
the operating system.
If you have any SRs (service releases) that you want to install, you can
copy them to this directory:
\Flash File Store\SSPB\SRS
Printer Support Provides Intermec printer driver support.
Intermec DHCP Client Provides the Intermec DHCP client application.
Printer_Configlet Intermec Settings configuration support for
Bluetooth printers.
Bluetooth Intermec Bluetooth integration support.
IDLRuntime Runtime files supporting the Data Collection
and Device Resource Kits.
Document Imaging Enhanced Mobile Document Imaging
components. Supported by CN4s with the EA21
area imager.
Image Capture Image Capture application and components.
Supported by CN4s with the EA21 area imager.
Power Profiler Power Profiler applet.
GPS Applet iGPS Settings applet.
Additional Files Microsoft C Runtime Library
InstallSelect Software Components (continued)
Component Name Description
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 83
There are two ways to upgrade your computer:
You can upgrade your computer using the SmartSystems console.
For help, see “Upgrading the CN4 Using SmartSystems
Foundation” on page 84.
You can upgrade your computer using a storage card. For help, see
“Upgrading the CN4 Using a miniSD Card” on page 85.
Locating Upgrade Files
Before you can upgrade, you need to download the latest upgrade files
from the Intermec website to your desktop PC.
To download the upgrade files
1 Open a web browser and go to www.intermec.com.
2 Choose Support > Downloads and choose these items:
a In the Product Category list, choose Computers.
b In the Product Family list, choose Handheld Computers.
c In the Product list, choose CN4 Mobile Computer.
3 Click Submit. A list of downloadable software appears.
4 Look for the appropriate upgrade files in the OS/Firmware/
Drivers list, and click a filename to download it.
If you are managing the CN4 with SmartSystems Foundation,
Intermec Update alerts you when new upgrades or software are
available. You can have the upgrades and software installed to the
console for immediate use. For information, see “Managing the CN4
With SmartSystems Foundation” on page 44.
Chapter 3 — Developing and Installing Applications
84 CN4 Mobile Computer User’s Manual
Upgrading the CN4 Using SmartSystems Foundation
You can use the SmartSystems Foundation console to upgrade the
operating system on your CN4. For information on using
SmartSystems Foundation, see “Managing the CN4 With
SmartSystems Foundation” on page 44.
To upgrade the CN4 using SmartSystems Foundation
1 On your desktop PC, open the SmartSystems console.
2 Make sure the SmartSystems console and the CN4 are on the same
subnet.
3 Make sure the CN4 is either in a communications dock or
charging dock, or the device power management is disabled.
4 Download the device upgrade file to your PC as described in the
previous section, “Locating Upgrade Files.”
5 Double-click the .exe file on your PC. An InstallShield application
starts and walks you through the process of extracting the
upgrade files to the default location.
6 From the SmartSystems console, locate the device upgrade to
install.
7 Drag the file to each CN4 you want to upgrade or to a group of
CN4s in a folder. The SmartSystems console installs the upgrade
on your computers.
After the download is complete, your CN4 replaces the operating
system and automatically performs a cold boot.
Note: Do not change the default location where InstallShield
extract the files. The SmartSystems console requires the files to be
in this location.
Note: The SmartSystems console displays a red stop sign symbol,
indicating that the CN4 is offline, until the CN4 reboots and
reconnects to the system.
Chapter 3 — Developing and Installing Applications
CN4 Mobile Computer User’s Manual 85
Upgrading the CN4 Using a miniSD Card
To use a miniSD card to upgrade the computer, you need an SD card
reader and a miniSD adapter card formatted as FAT16.
To upgrade the operating system using a miniSD card
1 Copy all required OS upgrade files to the miniSD card.
2 Insert the miniSD card into the CN4. For help, see “Installing a
miniSD or SIM Card” on page 37.
3 Place the CN4 in a dock connected to external power and use a
stylus to press the Reset button located in the battery cavity on the
back of the CN4. For help, see “Cold Booting the CN4” on
page 98.
4 Remove the miniSD card when the Installation Complete menu
appears.
5 Remove the CN4 from the dock and replace the battery.
To upgrade the SSPB using a miniSD card
1 Copy all required SSPB upgrade files to the miniSD card.
2 Insert the miniSD card into the CN4.
3 Clean boot the CN4. For help, see “Clean Booting the CN4” on
page 99. When the clean boot is complete, the CN4 warm boots to
reset the configuration.
4 (Optional) Remove the miniSD card or delete the files on the
miniSD card. During the clean boot, the files were copied from the
miniSD card to the Flash File Store.
5 Set the network communication parameters to reestablish
communications with the other devices in the wireless network.
Chapter 3 — Developing and Installing Applications
86 CN4 Mobile Computer User’s Manual
87
4
Troubleshooting and Maintaining the CN4
If you encounter any problems while using the CN4, look in
this chapter to find a possible solution. You will also find
information on routine maintenance. This chapter contains
these sections:
Calling Product Support
Troubleshooting the CN4
Resetting the CN4
Cleaning the CN4
Chapter 4 — Troubleshooting and Maintaining the CN4
88 CN4 Mobile Computer User’s Manual
Calling Product Support
If you cannot find the answer to your problem in the
Troubleshooting the CN4 section, you can visit the Intermec
technical knowledge base (Knowledge Central) at
intermec.custhelp.com to review technical information or to request
technical support. If you still need help after visiting Knowledge
Central, you may need to call Product Support.
To talk to an Intermec Product Support representative, call:
1-800-755-5505
Before you call Intermec Product Support, make sure you have the
following information ready:
Configuration number
Serial number
Operating system version
SmartSystems Platform Bundle (SSPB) version
Power management settings
If you are using security, know the type (Funk or Microsoft) and
the full set of parameters
If you are using terminal emulation (TE), know the version and
protocol. If you are not using TE, know the language your custom
application was written in and the tools you used to create it.
You can find most of the information listed above in Intermec
Settings. Consult your application developer for information on your
custom application.
To find your configuration number
Look at the label on the back of the computer.
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 89
To find your operating system version
1 Tap Start > Internet Explorer.
2 Tap the Intermec logo. The Intermec page appears and displays
the software build information.
Troubleshooting the CN4
If you send the CN4 in for service, it is your responsibility to save the
computer data and configuration. Intermec is responsible only for
ensuring that the hardware matches the original configuration when
repairing or replacing the computer.
Problems While Configuring the CN4
Problem Solution
You scan a configuration command,
such as Beeper Volume, and you hear
three low beeps.
If you are working in Intermec Settings, you cannot scan
configuration commands. Exit the application to scan
configuration commands.
You scan or enter an option for the
Scanner Model configuration
command and you hear three low
beeps.
You may have scanned or entered a Scanner Model
command that does not apply to the type of scanner that
you have installed. Try scanning or entering the Scanner
Model command again and select an option for the type
of device you are using.
You cannot type a character on the
keypad or you can only type uppercase
or lowercase letters.
You may have locked a modifier key on the keypad. Press
the necessary key sequence to unlock the key. For help,
see “Using the Keypad” on page 12.
Chapter 4 — Troubleshooting and Maintaining the CN4
90 CN4 Mobile Computer User’s Manual
Problems While Operating the CN4
Problem Solution
You press the Power button and
nothing happens.
Make sure the backlight is on.
Make sure you have a charged battery that is installed
correctly. For help, see “Charging the Battery” on
page 4.
Replace the battery with a charged battery. For help,
see “Changing the Battery” on page 4.
Perform a warm boot or a cold boot. For help, see
“Resetting the CN4” on page 97.
The Battery status LED is on. The battery status LED indicates the following states:
If the battery status LED is a steady green, the battery
is more than 95% charged and computer is on a
charger.
If the battery status LED is blinking red, then the
battery is low. Replace or charge the battery.
If the battery status LED is a steady red, the main
battery is on charge.
If the battery status LED is amber, the CN4 is on
charge and either the battery temperature is outside
of the charging range, or the battery is defective.
The computer appears to be locked up
and you cannot enter data.
Press the power key to turn off the computer, then
press the power key again to turn it on.
Press and hold the power key ten seconds to warm
boot the computer.
Try reloading the firmware. See “Freeing Up Virtual
Memory for Applications” on page 80.
If the computer does not boot or reset, contact your
Intermec representative for help.
You tap the screen and nothing
happens.
Align your screen. For help, see Aligning the Touch
Screen” on page 21.
Problems With 802.11 Network Connectivity
Problem Solution
When you turn on the computer after it
was suspended for a while (10 to 15
minutes or longer), it can no longer
send or receive messages over the
network.
Host may have deactivated or lost current terminal
emulation session. In a TCP/IP direct connect network,
turn off the “Keep Alive” message from host to maintain
the TCP session while the computer is suspended.
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 91
The CN4 is connected to the network
and you move to a new site to collect
data. Your CN4 now shows you are not
connected to the network.
Move closer to an access point or to a different location
to reestablish communications until you reconnect with
the network. Any data collected while out of range is
transmitted over the network.
The CN4 appears to be connected to
the network, but you cannot establish a
terminal emulation session with the
host computer.
There may be a problem with the host computer, with
the connection between the Intermec Application Server
and the host computer, or with the connection between
the access point and the host computer. Check with
network administrator to make sure the host is running
and allowing users to login to the system.
The CN4 appears to be connected to
the network, but the host computer is
not receiving any information from the
CN4.
In a TCP/IP network, there may be a problem with the
connection between the access point and the host
computer. Check with network administrator or use
your access point user’s manual.
Problems While Configuring 802.1x Security
Problem Solution
The CN4 indicates that it is
authenticated, but it does not
communicate with the host.
Make sure the CN4 IP address, host IP address, subnet
mask, default router are configured for network.
The CN4 does not appear to be
authenticating and a network
connection icon does not appear on the
toolbar.
The CN4 may not be communicating with the access
point. Make sure the CN4 network name matches the
access point network name (SSID).
802.1x security network may not be active. Make sure the
server software is properly loaded and configured on the
server PC. See server software documentation for help.
A network connection icon appears in
the toolbar, but then disappears.
The CN4 may not be communicating with the intended
access point. Make sure the CN4 network name matches
the access point network name. Default network name is
“INTERMEC.”
Access point may not be communicating with server.
Ensure the access point is turned on, properly
configured, and has 802.1x security enabled
You are setting up multiple access
points in a network, with different
SSIDs, and the connection fails.
The CN4 does not save WEP key values when changing
the SSID. Reenter the WEP key value after changing the
SSID and save your changes. You should now be able to
connect to the different access points.
Problems With 802.11 Network Connectivity (continued)
Problem Solution
Chapter 4 — Troubleshooting and Maintaining the CN4
92 CN4 Mobile Computer User’s Manual
The CN4 indicates it is not
authenticated.
Make sure that:
the User Name and Password parameters on the CN4
must match the user name and password on
authentication server. You may need to reenter the
password on both the CN4, authentication server.
on your authentication server, the user and group are
allowed and the group policy is allowed to log into the
server. For help, see the documentation that shipped
with your authentication server software.
the IP address and secret key for access point must
match the IP address and secret key on the
authentication server. You may need to reenter the IP
address and secret key on both your access point and
authentication server.
the authentication server software is running on the
server PC.
You receive a message saying “The
server certificate has expired or your
system date is incorrect” after you
perform a clean boot on the CN4.
Date and time are not saved when you perform a clean
boot. Reenter the date and time, and then save your
changes.
Problems Reading Bar Codes
Problem Solution
You cannot see a red beam of light from
the imager when you press the Scan
button and aim the imager at a bar
code label.
You may be too far away from the bar code label. Try
moving closer to the bar code label and scan it again.
You may be reading the bar code label “straight on.”
Change the reading angle and try again.
The imager hardware trigger might be disabled in
Intermec Settings. To check the setting go to Start >
Settings > System Tab > Data Collection > Scanner
Settings. Hardware trigger should be checked.
The input device attached to the
computer does not work well or read
bar code labels very quickly.
Set the Scanner Model command to the specific attached
input device. Check enabled bar code symbologies and
enable only the symbologies being used.
Problems While Configuring 802.1x Security (continued)
Problem Solution
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 93
When you release a Scan button or
handle trigger, the Good Read light
does not turn off.
The Good Read light will remain on if you configure the
computer to use continuous/edge triggering. If you
configure the computer for level triggering and the
Good Read light remains on, there may be a problem.
Press one of the Scan buttons or pull the trigger again
without scanning a bar code label. If the light is still on,
contact your local Intermec representative.
The scanner will not read the bar code
label.
Aim the scanner beam to cross entire bar code label in
one pass. Vary the scanning angle.
Check the quality of the bar code label, Scan a bar
code label that you know will scan. Compare the two
bar code labels to see if the bar code quality is too low.
You may need to replace the label that you cannot
scan.
Make sure the bar code symbology is enabled and
configured correctly. Use Intermec Settings to check
the symbologies. Expand Data Collection >
Symbologies beneath devices listed (scanner, virtual
wedge) to check and enable symbologies, then scan
the bar code label again.
Make sure the computer application is expecting
input from a bar code. You may need to type this
information instead.
The scanner does not read the bar code
labels quickly, or the scanning beam
seems to be faint or obscured.
The scanner window may be dirty. Clean the window
with a solution of ammonia and water. Wipe dry. Do not
allow abrasive material to touch the window.
You scan a valid bar code label to enter
data for your application. The data
decoded by the scan module does not
match the data encoded in the bar code
label.
The computer may have decoded the bar code label in a
symbology other than the label’s actual symbology. Try
scanning the bar code label again. Make sure you scan
the entire label.
Problems Reading Bar Codes (continued)
Problem Solution
Chapter 4 — Troubleshooting and Maintaining the CN4
94 CN4 Mobile Computer User’s Manual
Checking 802.11 Network Status
If you have trouble connecting to your 802.11 wireless network:
Make sure you have correctly set network parameters on the CN4.
Check your wireless security settings.
Follow the next procedure to use iConnect to verify available access
points and networks, check signal strength, and view other
diagnostics. If you need to contact Intermec Product Support, this
information can be helpful in troubleshooting wireless network
connection issues.
To use iConnect to verify network status
1 Tap the iConnect icon ( ) in the lower right corner of the CN4
screen.
2 Choose Status > Wireless.
3 Tap Advanced. The diagnostics screen appears.
The ISpy tab shows:
MAC address and IP address of the 802.11 radio.
network association status, including the SSID and MAC
address of the access point
security configuration.
radio transmit power and signal strength information.
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 95
4 Tap the Scan tab to view a list of available 802.11 networks. The
list includes the signal strength, channel, and MAC address for
each network.
Tap Scan to refresh the screen.
5 Tap the Supp tab to view radio supplicant information, including
a list of supplicant events and authentication status.
To verify the settings for the currently active security profile,
tap Configure Profile. The Profile Wizard for the active
profile appears.
To try reconnecting to the network, tap Reconnect.
To delete the events in the list, tap Clear Events.
Chapter 4 — Troubleshooting and Maintaining the CN4
96 CN4 Mobile Computer User’s Manual
6 Tap the Ping tab to run a ping test to the host.
To run a ping test:
a In the Host field, enter the IP address of the host.
b From the Repetitions list, choose the number of times the
CN4 will ping the host.
c Tap Ping. The graph shows the amount of time it takes for the
host to return the ping. Tap List to see this information in a
list format.
7 Tap the RSSI tab to view the received signal strength of the host
signal.
The information box includes the current signal strength, host
SSID name, MAC address, data rate, and transmit power.
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 97
Tap Mark to place an arrow marker above the graph.
8 Tap the Conf tab to set up a log file that lists RSSI history.
This screen includes the 802.11 radio driver version and available
radio modes.
To create a log file:
a Check the Log to File check box.
b (Optional) Change the sample period and number of samples
displayed.
c Tap Log File. The Save As screen appears.
d (Optional) Change the name of the saved log file, the folder to
which the file will be saved, the content type (log or text), and
the location.
e Tap Save.
Resetting the CN4
You rarely need to reset the computer. If the computer does not
resume after pressing the Power button, or if the computer or an
application locks up, you may need to reset the CN4. The CN4 uses
the configuration currently saved in flash memory during the boot
process. There are three ways to reset the CN4:
Warm booting the CN4
Cold booting the CN4
Chapter 4 — Troubleshooting and Maintaining the CN4
98 CN4 Mobile Computer User’s Manual
Clean booting the CN4
Warm Booting the CN4
You may need to perform a warm boot to correct conditions where an
application stops responding to the system.
To warm boot the computer
Press and hold the Power button for 10 seconds.
Or,
Right-click on the CN4 via the SmartSystems console and select
Intermec Power Tools > Warm Boot Device.
The computer systematically shuts down, restarts, and goes through
the initialization process.
Cold Booting the CN4
In some cases where the computer completely stops responding, you
may need to perform a cold boot. Because cold booting may result in
data loss, use this method only if all other recovery methods have
failed.
To cold boot your CN4
1 Press the Power button to suspend the CN4.
2 Remove the battery pack from the CN4.
3 Use the stylus to press the Reset button on the back of the CN4.
Note: Cold booting the CN4 does not guarantee that cached disk data
will be saved, so transactional data may be lost during the reset. All
other data, such as CN4 configuration and network settings, is
preserved.
Chapter 4 — Troubleshooting and Maintaining the CN4
CN4 Mobile Computer User’s Manual 99
Locating the Reset Button on the CN4
Clean Booting the CN4
If the CN4 seems to be locked up, try warm booting and then cold
booting the computer. If neither method works, use a clean boot to
get the CN4 up and running for further troubleshooting.
The clean boot process is as follows:
initial boot > SSPB installation > reboot > DCE installation > SRs
copied to CabFiles folder > _sstransferagent.xml run > reboot >
CabFiles folder contents run > reboot, if required.
To clean boot the computer
1 Press the Power button to suspend the CN4.
2 Remove the battery pack from the back of the CN4.
3 Use the stylus to press the Reset button on the back of the CN4.
Reset button
A clean boot erases the memory in the mobile computer,
including all applications and data files found in the ObjectStore,
and loads only the default files and programs required by the
CN4 operating system.
During a clean boot, the CN4 first looks for the SSPB files on an
installed miniSD card. If no card is found, the CN4 loads the
SSPB files in the Flash File Store. Files found on a miniSD card
during a clean boot are copied into the Flash File Store and
overwrite the existing SSPB files.
Chapter 4 — Troubleshooting and Maintaining the CN4
100 CN4 Mobile Computer User’s Manual
4 Insert the battery pack into the CN4, and immediately press and
hold the Power button and both buttons on the left side.
5 Continue to hold the Power button and both buttons on the left
side until a Warning message appears on the display.
6 Release the Power button and both buttons on the left side, read
the message, and press either button on the right side to continue.
7 Wait for the CN4 to load files from its ROM.
Cleaning the CN4
To keep the CN4 in good working order, you may need to clean the
imager window, color camera window, and the touch screen. Clean
the windows and the touch screen as often as needed for the
environment in which you are using the CN4. To clean the CN4, use a
solution of ammonia and water.
To clean the imager window, camera window, and touch screen
1 Press the Power button to suspend the CN4.
2 Dip a clean cloth towel in the ammonia solution and wring out
the excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
Note: You can also clean boot the CN4 using the SmartSystems
console. To clean boot the CN4 using the SmartSystems console,
right-click the CN4 and select Intermec Power Tools > Clean Boot
Device.
There are no user-serviceable parts inside the CN4. Opening the
CN4 will void the warranty and may cause damage to the internal
components.
101
A
Specifications and Default Settings
Appendix A — Specifications and Default Settings
102 CN4 Mobile Computer User’s Manual
Physical and Environmental Specifications
CN4 Physical Dimensions (excluding overmold)
Length:17.3 cm (6.8 in)
Width: 8.1 cm (3.2 in)
Height: 2.8 cm (1.1 in) with standard battery
3.3 cm (1.3 in) with extended battery
Weight: 397 to 454 g standard battery (14 to 16 oz)
CN4e Physical Dimensions (excluding overmold)
Length: 21.0 cm (8.3 in)
Width: 8.1 cm (3.2 in)
Height: 3.3 cm (1.3 in) with extended battery
Weight: 510 to 567 g (18 to 20 oz)
Hardware
Microprocessor: Marvell PXA270M
Application processor: 520 MHz RAM
Memory: 128 MB RAM
Persistent storage: 256 MB NAND flash, provides onboard non-
volatile storage
Removable storage: miniSD card slot, user-accessible
Keypad: numeric, QWERTY (CN4), alphabetic (CN4e)
Imaging options: EA11 area imager, EA21 area imager, or color
camera
Bluetooth QD ID: B013037
Operating System
Microsoft Windows Mobile 6.1
Standard Communications
Ethernet, Serial, IRDA, USB host, USB client, Bluetooth, 802.11 b/g,
802.11 d, HSDPA, UMTS, CDMA, GPS
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 103
Touch Screen Specifications
Transflective TFT; QVGA color with touch panel; 240 x 320 pixels; 8.9
cm (3.5 in) diagonal active area; 5-level LED backlight control with
settings
Electrical Specifications
External charge power: 5 V +/- 5% @3.5 A max (18 W max)
Environmental
Operating temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Storage temperature: -20 °C to 70 °C (-4 °F to 158 °F)
Humidity: 5% to 95% non-condensing
Rain and dust resistance: IP64 compliant
Drop specifications: 26x all faces, sides, and corners from 1.8 m (6 ft)
per MIL-STD 810G
Power Specifications
Battery type: Rechargeable Lithium-Ion (Li-ion) batteries:
AB8, AB15: 3.7 VDC, 2.2 Ah
AB9, AB16, AB28: 3.7 VDC, 4.0 Ah
Recharge time: 5 hours or less
Recharge temperature: 0 °C to 40 °C (32 °F to 104 °F)
Battery capacity: AB8, AB15: 8 Wh
AB9, AB16, AB28: 14 Wh
Backup battery: Super capacitor supplies 5 minutes bridge time
Wireless LAN
Standards compliant: IEEE 802.11g (2.4 GHz, OFDM)
IEEE 802.11 b (2.4 GHz, DSSS)
Data rates: Up to 54 Mbps for 802.11g
Up to 11 Mbps for 802.11b
Radio power output: 100 mW
Security: WPA2, WPA, 802.11i, 802.1x, WEP (EAP-TLS, TTLS, LEAP,
PEAP, EAP-FAST)
Certifications: WPA2, WPA, Wi-Fi, Cisco Compatible Extensions
(CCX) version 4
Appendix A — Specifications and Default Settings
104 CN4 Mobile Computer User’s Manual
Regulatory Approvals
Safety: cULus Listed, GS, CCC, GOST (pending), NOM, HKSI
EMC: FCC Part 15B – Class B, ICES-003 Class B, EN 55022 Class B,
EN 55024, EN 301 489-17, AS/ZNS 3548, GB9254-1998, BSMI,
ICASA
Radio: FCC Part 15.247, Industry Canada RSS 210, EN 300 328-2,
Telecom. Num. 547, NCC, OFTA, MIC, IDA
Other: Compliant with all applicable EU Directives – EMC, Low
Voltage, R&TTE, Vehicle, WEEE, RoHS, Packaging & Waste
Packaging
Hazardous Location Certified:
UL Listing (United States and Canada)
Division 2, Class I, Groups A, B, C, D; T4
Division 2, Class II, Groups F; G T4
Division 2, Class III; T4
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 105
EA21 Area Imager Typical Reading Distances
Typical distances are measured in an office environment (250 lux).
cm
PDF417 10 mils
0.15mm/6 mils
0.25 mm / 10 mils
0.5 mm / 20 mils
Data Matrix 10 mils
in
0" 32"28"24"20"16"12"8"4"
08070605040302010
100% contrast UPC EAN
0"
4"
8"
0
10
20
12"
16"
30
40
16"
12"
8"
4"
40
30
20
10
Note: Minimum distances depend on bar code length.
EA21 Typical Reading Distances
Symbology Density Minimum Distance Maximum Distance
Code 39 0.15 mm (6 mil)
0.25 mm (10 mil)
0.5 mm (20 mil)
1 mm (40 mil)
12 cm (4.72 in)
5 cm (1.97 in)
5 cm (1.97 in)
9 cm (3.54 in)
18 cm (7.09 in)
30 cm (11.81 in)
60 cm (23.62 in)
95 cm (37.40 in)
UPC/EAN 100% 0.33 mm (13 mils) 5 cm (1.97 in) 41 cm (16.14 in)
Data Matrix 0.25 mm (10 mils)
0.38 mm (15 mils)
12 cm (4.72 in)
8 cm (3.15 in)
22 cm (8.66 in)
35 cm (13.78 in)
PDF417 0.25 mm (10 mils)
0.38 mm (15 mils)
7 cm (2.75 in)
7 cm (2.75 in)
29 cm (11.42 in)
44 cm (17.32 in)
Appendix A — Specifications and Default Settings
106 CN4 Mobile Computer User’s Manual
EA21 Area Imager Minimum Reading Distances
Minimum distances are measured in the dark (0 lux).
0"
4"
8"
0
10
20
cm
PDF417 10 mils
0.15mm/6 mils
0.25 mm / 10 mils
0.5 mm / 20 mils
Data Matrix 10 mils
in
0" 32"28"24"20"16"12"8"4"
08070605040302010
100% contrast UPC EAN
12"
16"
30
40
16"
12"
8"
4"
40
30
20
10
Note: Minimum distances depend on bar code length.
EA21 Minimum Reading Distances
Symbology Density Minimum Distance Maximum Distance
Code 39 0.15 mm (6 mil)
0.25 mm (10 mil)
0.5 mm (20 mil)
1 mm (40 mil)
12 cm (4.72 in)
5 cm (1.97 in)
5 cm (1.97 in)
9 cm (3.54 in)
18 cm (7.09 in)
28 cm (11.02 in)
55 cm (21.65 in)
75 cm (29.53 in)
UPC/EAN 100% 0.33 mm (13 mils) 5 cm (1.97 in) 38 cm (14.96 in)
Data Matrix 0.25 mm (10 mils)
0.38 mm (15 mils)
12 cm (4.72 in)
8 cm (3.15 in)
22 cm (8.66 in)
34 cm (13.39 in)
PDF417 0.25 mm (10 mils)
0.38 mm (15 mils)
7 cm (2.75 in)
7 cm (2.75 in)
28 cm (11.02 in)
40 cm (15.75 in)
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 107
EA11 Area Imager Typical Reading Distances
8"
4"
6"
2"
0"
2"
4"
in
6"
8"
10"
10"
cm
10
5
0
5
10
15
20
20
15
25
25
0 5040302010
0" 20"16"12"8"4"
PDF417 6.6 mils
0.125mm/5mils
0.25 mm / 10 mils
0.5 mm / 20 mils
Data Matrix 7.5 mils
100% contrast UPC EAN
EA11 Typical Reading Distances
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mil)
0.20 mm (8 mil)
0.25 mm (10 mil)
0.50 mm (20 mil)
1 mm (40 mil)
7.2 cm (2.8 in)
3.8 cm (1.5 in)
3.4 cm (1.3 in)
5 cm (2 in)
8 cm (3.1 in)
13.1 cm (5.1 in)
22.5 cm (8.8 in)
27 cm (10.5 in)
44 cm (17.2 in)
83 cm (32.4 in)
UPC/EAN 0.33 mm (13 mils) 5 cm (2 in) 32 cm (12.5 in)
Data Matrix 0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.3 cm (2.5 in)
4.8 cm (1.9 in)
*
17.3 cm (6.7 in)
22 cm (8.6 in)
29 cm (11.3 in)
PDF417 0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.25 cm (2.46 in)
4.5 cm (1.8 in)
4 cm (1.6 in)
15.4 cm (6 in)
23 cm (9 in)
37 cm (14.4 in)
Appendix A — Specifications and Default Settings
108 CN4 Mobile Computer User’s Manual
EA11 Area Imager Minimum Reading Distances
Minimum distances are measured in the dark (0 lux).
*
8"
4"
6"
2"
0"
2"
4"
in
6"
8"
10"
10"
cm
10
5
0
5
10
15
20
20
15
25
25
0 5040302010
0" 16"12"8"4"
PDF417 6.6 mils
0.125mm / 5mils
0.25 mm / 10 mils
0.5 mm / 20 mils
Data Matrix 7.5 mils
100% contrast UPC EAN
EA11 Minimum Reading Distances
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mil)
0.20 mm (8 mil)
0.25 mm (10 mil)
0.50 mm (20 mil)
7.26 cm (2.86 in)
3.96 cm (1.56 in)
3.45 cm (1.36 in)
4.98 cm (1.96 in)
12.09 cm (4.76 in)
20.98 cm (8.26 in)
25.04 cm (9.86 in)
40.28 cm (15.86 in)
UPC/EAN 0.33 mm (13 mils) 4.98 cm (1.96 in) 29.62 cm (11.66 in)
Data Matrix 0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
3.71 cm (2.46 in)
5.98 cm (2.35 in)
*
16.41 cm (6.46 in)
20.73 cm (8.16 in)
27.58 cm (10.86 in)
PDF417 0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.25 cm (2.46 in)
4.47 cm (1.76 in)
4.98 cm (1.96 in)
13.87 cm (5.46 in)
21.74 cm (8.56 in)
33.43 cm (13.16 in)
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 109
Accessories
All of the accessories listed below work for both the CN4 and CN4e
models unless otherwise noted.
AA15 Audio Adapter
Use the audio adapter to connect your audio headset to the CN4.
AA16 Ethernet Adapter
Use the Ethernet adapter to connect the CN4 to your Ethernet
network without using a dock.
AA17 RS-232/DEX Adapter
Use the RS-232/DEX adapter to enable the CN4 to receive serial
communications.
AA18 USB Adapter
Use the USB adapter to connect the CN4 to USB.
AC14 Quad Battery Charger
Use the quad battery charger to charge up to four CN4 battery packs.
AD10 Single Dock
Use the single dock to hold a CN4 with its battery installed, charge a
spare battery pack, charge the main battery pack, and provide power
to the CN4. The dock has USB host and client connectors. Optional
modules are available to convert the USB host to Ethernet or to a
landline modem.
AD11 Multidock
Use the multidock to hold up to four CN4s with batteries installed.
The multidock charges the batteries and provides power and Ethernet
connections to each CN4.
AD12 Charge-Only Multidock
Use the charge-only multidock to hold up to four CN4s with batteries
installed, charge batteries, and provide power to CN4s.
AE11 Vehicle Power Adapter
Use the vehicle power adapter to charge the CN4 in your vehicle.
Appendix A — Specifications and Default Settings
110 CN4 Mobile Computer User’s Manual
AR1 Magnetic Card Reader
The magnetic card reader provides magnetic stripe reading capability
to the CN4.
AV6 Vehicle Dock
Use the vehicle dock to hold and charge the CN4 while using it on a
vehicle.
AV9 Vehicle Dock
Use the vehicle dock to hold and charge the CN4e while using it on a
vehicle.
CN4 Scan Handle
Use the scan handle to provide better ergonomics for higher-volume
scanning applications.
Default Settings
The following tables list the default values of the configuration
settings supported on the CN4. If you restore the CN4 to factory
default settings, the CN4 uses these values.
The settings are grouped by function and reflect the organization of
Intermec Settings. For detailed information on most of the
commands, see the Intermec Settings Command Reference Manual,
available from the Intermec website at www.intermec.com.
Data Collection
Data Collection Setting Default Value
Enable scanner port Enable
Enable scanner auto-detect Enable
Symbology Default Value
AustraliaPost Disable
Aztec Disable
BPO Disable
CanadaPost Disable
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 111
ChinaPost Disable
Codabar Disable
Codablock A Disable
Codablock F Disable
Code 11 Disable
Code 39 Enable
Code 93 Disable
Code 128/GS1-128 Enable
DataMatrix Enable
DutchPost Disable
EAN/UPC Enable UPC A, UPC E,
EAN 8, EAN 13
EAN.UCC Composite Disable
GS1 DataBar Expanded Disable
GS1 DataBar Limited Disable
GS1 DataBar Omni-Directional Disable
Interleaved 2 of 5 Disable
JapanPost Disable
Matrix 2 of 5 Disable
Maxicode Disable
Micro PDF417 Disable
MSI Disable
PDF417 Enable
Planet Disable
Plessey Disable
Postnet Disable
QR Code Disable
Standard 2 of 5 Disable
Telepen Disable
TLC 39 Disable
Symbology (continued) Default Value
Appendix A — Specifications and Default Settings
112 CN4 Mobile Computer User’s Manual
Symbology Option Default Value
Preamble None (disabled)
Postamble None (disabled)
Global Symbology ID Disable
Scanner Setting Default Value
Hardware Trigger Enable
Turn Off After Good Read Enable/One-shot
Trigger mode (area imagers only) Level
Imager Setting Default Value
Predefined Modes 1D and 2D Standard
Sticky aimer LED duration 0 (disabled)
Signature Image Capture Disable
Decode Security Setting Default Value
Consecutive Data Validation 0
Identical Consecutive Timeout 300 ms
Different Consecutive Timeout 0
Center Decoding Disable
Center Decoding Tolerance Disable
Virtual Wedge Setting Default Value
Virtual Wedge Enable
Grid Null
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 113
Communications
Device Settings
Communication Setting Default Value
Security Choice Funk
Allow Security Changes Enabled
Active Profile Profile 1
DHCP Enabled
Import Root Certificates False
Import User Certificates False
Import Pac Files False
Radio Measurement 250
Radio Enabled
Ethernet Adapter IP Settings DHCP
Bluetooth Power Off
Bluetooth Discoverable Disabled
Bluetooth Connectable Enabled
Device Settings Default Value
Adjust for Daylight Time Off
Scanner Beep One beep
Scanner Good Read Light On
Tethered Scanner Beep One beep
Tethered Scanner Good Read Light On
Bluetooth Scanner Beep One beep
Bluetooth Scanner Good Read Light On
Beeper Volume Medium
Backlight Off (battery power) 30 seconds
Backlight Off (external power) 1 minute
Backlight Level High
Scan Button Remapping (handle trigger) BRI
Scan Button Remapping (right scan button) Scanner
Scan Button Remapping (left scan button) Scanner
Appendix A — Specifications and Default Settings
114 CN4 Mobile Computer User’s Manual
Scan Button Remapping (middle scan button) Scanner
Power Profiles Standard
Power Button Off when pressed
Device Off (battery power) 2 minutes
Display Off (battery power) 1 minute
Device Off (external power) Disabled
Display Off (external power) Disabled
Device Settings (continued) Default Value
Appendix A — Specifications and Default Settings
CN4 Mobile Computer User’s Manual 115
GPS
Device Monitor
Core Messaging Service
Setting Default Value
Extended Ephemeris Data Disable
Download Interval Disable
Download Interval Start Time 1:00 AM
Download Interval Stop Time 3:00 AM
Push Interval Disable
Push Interval Start Time 1:00 AM
Push Interval Stop Time 3:00 AM
Poll Period Disable
Position Change 50 meters
Fix Interval 0
WAAS Disable
Baud Rate 33600
Setting Default Value
Poll Period 1 minute
Backup Battery Charge Remaining 10
Storage Load 90
Memory Load 90
Setting Default Value
Keep Alive Ping Interval 30 seconds
Appendix A — Specifications and Default Settings
116 CN4 Mobile Computer User’s Manual
117
B
Keypads and Keystrokes
Appendix B — Keypads and Keystrokes
118 CN4 Mobile Computer User’s Manual
Standard Characters
Use the following tables to learn how to enter standard and other
available characters and functions with the keypad. If there is no
sequence of keystrokes for a particular character or function, it is only
available through the soft input panel (SIP), which can be accessed by
tapping the keyboard icon on the touch screen.
Alphanumeric Characters
Character Numeric Keypad QWERTY Keypad Alphabetic Keypad
a
c 2 A A
b
c 2 2 B B
c
c 2 2 2 C C
d
c 3 D D
e
c 3 3 E E
f
c 3 3 3 F F
g
c 4 G G
h
c 4 4 H H
i
c 4 4 4 I I
j
c 5 J J
k
c 5 5 K K
l
c 5 5 5 L L
m
c 6 M M
n
c 6 6 N N
o
c 6 6 6 O O
p
c 7 P P
Appendix B — Keypads and Keystrokes
CN4 Mobile Computer User’s Manual 119
q
c 7 7 Q Q
r
c 7 7 7 R R
s
c 7 7 7 7 S S
t
c 8 T T
u
c 8 8 U U
v
c 8 8 8 V V
w
c 9 W W
x
c 9 9 X X
y
c 9 9 9 Y Y
z
c 9 9 9 9 Z Z
A
c 1 2 ] A ] A
B
c 1 2 2 ] B ] B
C
c 1 2 2 2 ] C ] C
D
c 1 3 ] D ] D
E
c 1 3 3 ] E ] E
F
c 1 3 3 3 ] F ] F
G
c 1 4 ] G ] G
H
c 1 4 4 ] H ] H
I
c 1 4 4 4 ] I ] I
J
c 1 5 ] J ] J
Alphanumeric Characters (continued)
Character Numeric Keypad QWERTY Keypad Alphabetic Keypad
Appendix B — Keypads and Keystrokes
120 CN4 Mobile Computer User’s Manual
K
c 1 5 5 ] K ] K
L
c 1 5 5 5 ] L ] L
M
c 1 6 ] M ] M
N
c 1 6 6 ] N ] N
O
c 1 6 6 6 ] O ] O
P
c 1 7 ] P ] P
Q
c 1 7 7 ] Q ] Q
R
c 1 7 7 7 ] R ] R
S
c 1 7 7 7 7 ] S ] S
T
c 1 8 ] T ] T
U
c 1 8 8 ] U ] U
V
c 1 8 8 8 ] V ] V
W
c 1 9 ] W ] W
X
c 1 9 9 ] X ] X
Y
c 1 9 9 9 ] Y ] Y
Z
c 1 9 9 9 9 ] Z ] Z
0
0b gb g
1
1b Yb J
2
2b Ub K
3
3b Ib L
Alphanumeric Characters (continued)
Character Numeric Keypad QWERTY Keypad Alphabetic Keypad
Appendix B — Keypads and Keystrokes
CN4 Mobile Computer User’s Manual 121
Other Available Characters
The next table lists both characters printed on the keypad overlays
and hidden characters not printed on the overlays.
4
4b Hb P
5
5b Jb Q
6
6b Kb R
7
7b Bb V
8
8b Nb W
9
9b Mb X
Alphanumeric Characters (continued)
Character Numeric Keypad QWERTY Keypad Alphabetic Keypad
Other Available Characters and Functions
To Enter Numeric Keypad QWERTY Keypad Alphabetic Keypad
^ (caret) N/A N/A
] b R
@ (ampersand) N/A
b Q b A
& (and) N/A
b S b H
* (asterisk) N/A
b C b D
: (colon) N/A
b D b M
, (comma) N/A
b X b T
$ (dollar) N/A
b E b B
" (double quote) N/A
] b Z ] b S
! (exclamation) N/A
] b 1 ] b J
Appendix B — Keypads and Keystrokes
122 CN4 Mobile Computer User’s Manual
> (greater than) N/A
] b . ] .
- (hyphen)
b * b G ] U
( (left parentheses) N/A
] b 9 ] b X
< (less than) N/A
] b X ] b T
% (percent) N/A
b R ] b C
. (period)
...
+ (plus)
b # b T b O
# (pound) N/A
b V b F
? (question mark) N/A
b A b G
) (right parentheses) N/A
] b g ] b Z
‘ (single quote) N/A
b Z b S
_ (underscore) N/A
] b G ] b U
BackTab
b j b j b j
CapsLock
c 1 b ] b ]
Enter
eee
Application Softkey 2
b 3 b O )
ok
b | b P k
Shift
c ] ]
Application Softkey 1
b 1 b W (
Space
c 0 s s
Other Available Characters and Functions (continued)
To Enter Numeric Keypad QWERTY Keypad Alphabetic Keypad
Appendix B — Keypads and Keystrokes
CN4 Mobile Computer User’s Manual 123
Characters not available from the keypads are:
Left and right bracket ([ or ])
Left and right curly bracket ({ or })
Semicolon (;)
Tilde (~)
Use the SIP to enter these characters.
Language-Specific Characters
The next table lists the available language-specific characters, such as
those using diacritical marks. The key sequences in this procedure
assume that Caps Lock is not enabled and that the orange and green
modifier keys are not locked when you start.
To type language-specific characters on the CN4e numeric keypad
1 Press
c c to lock the green modifier key.
2 Type the parent character.
3 Press
. to cycle through the variant characters until you find the
character you want. For more information, see the next table.
4 Press
c to unlock the green key.
To type language-specific characters on the QWERTY and alphabetic
keypads
1 Type the parent character.
2 Press
b b to lock the orange modifier key.
3 On the alphabetic keypad, press
E to cycle through the variant
characters until you finds the character you want. For more
information, see the next table.
On the QWERTY keypad, press
s to cycle through the variant
characters until you fins the character you want. For more
information, see the next table.
Note: These characters are not available on the CN4 numeric keypad.
Appendix B — Keypads and Keystrokes
124 CN4 Mobile Computer User’s Manual
4 Press b to unlock the orange key.
Language-Specific Characters
Parent Character Variant Characters
a
à áâäåãąăæ
A
À ÁÂÄÅĄ Ã Ă Æ
c
ç ćč©
C
Ç ĆČ©
d
ð
D
Ð
e
è é ê ë ę
E
È É Ê Ë Ę
i
ì í î ï
I
Ì Í Î Ï
l
ł
L
Ł
n
ñ
N
Ñ
o
ò óôõöő øœ
O
Ò ÓÔÕÖŐ ØŒ
p
Þ ¶
P
þ ¶
r
®
R
®
s
ş šß
S
Ş Šß
t
ţ
T
Ţ
u
ù ú û ü ű
U
Ù Ú Û Ü Ű
y
ý
Y
Ý
z
ź ż
Z
Ź Ż
125
I
Index
Index
126 CN4 Mobile Computer User’s Manual
Numerics
802.1x security
with Funk
63
with Microsoft 67
A
AA15 audio adapter, described
109
AA16 Ethernet adapter, described
109
AA17 RS-232/DEX adapter,
described
109
AA18 USB adapter, described 109
AC14 quad battery charger,
described
109
accessories, described
109
accessory
audio adapter
109
charge-only multidock 109
Ethernet adapter
109
magnetic card reader
110
multidock 109
quad battery charger
109
RS-232/DEX adapter
109
scan handle 110
single dock
109
USB adapter
109
vehicle dock 110
vehicle power adapter
109
Activation Wizard, starting
47
ActiveSync, using to install
applications
74
AD10 single dock, described
109
AD11 multidock, described 109
AD12 charge-only multidock,
described
109
AE11 vehicle power adapter,
described
109
aligning screen
21
alphabetic keypad
entering characters
13
illustrated
12
keypresses, listed
118124
amber battery LED, described
6
applications
developing
72
packaging
72
target location on CN4
72
Enhanced Mobile Document
Imaging
32
iConnect
58
Image Capture, integrating
76
applications (continued)
Image Capture, using
29
installing 73
ActiveSync
74
FTP server
75
miniSD card 74
launching automatically
75
troubleshooting
98
AR1 magnetic card reader,
described
110
area imager. See imager
audio adapter, described
109
audio device, Bluetooth,
connecting to
57
audio features
15
cell phone mike and speaker
15
front speaker
16
rear speaker volume 17
authentication
setting
6568
troubleshooting 91
AutoRun
75
AV6 vehicle dock, described
110
AV9 vehicle dock, described 110
B
backlight, configuring
22
bar codes
configuring the CN4 to read
48
enabled by default
27
reading
25
battery
changing
4
charging
4
description 37
icons
6
icons, understanding
20
installing
4
internal backup
4
maximizing life
8
specifications
103
status LED
4, 6
status, checking
7
troubleshooting status LED
90
beeps
three low, troubleshooting
89
volume, changing
17
blue LED, described
23
Bluetooth
audio device, connecting to
57
configuring 54
Index
CN4 Mobile Computer User’s Manual 127
Bluetooth (continued)
printer, connecting to
56
QD ID 102
scanner, connecting to
55
Wireless Printing enabler
56
Wireless Scanning enabler 55
Bluetooth Audio enabler
57
booting the CN4
97
clean 99
cold
98
warm
98
button, power 15
C
calibrating screen
21
calling product support
88
camera 35
cleaning window
100
configuring
36
capacitor, super, as backup power 4
card, miniSD, using to install
applications
74
carriers, supported 46
CDMA
activation values table
47
carriers, supported 46
MSID
47
MSL
47
phone, activating 47
cellular phone, using CN4 as
15, 46
CDMA, activating
46
GSM/EDGE, activating 48
making a call
48
mike and speaker, illustrated
16
power management profiles,
described
10
turning phone on and off
48
vibrate, enabling
18
certificates, loading
68
characters, typing with keypad
13
alphabetic, list of
118
hidden characters, list of
121
language-specific
123
punctuation, list of
121
special characters, list of
121
unsupported
123
charge-only multidock, described
109
clean boot, performing
99
cleaning computer
100
CN4
described
2
keypads, illustrated
12
Windows Mobile keys
14
See also CN4 series computers.
CN4 series computers
accessories
109
applications, developing and
installing
7276
audio
15
backlight 22
Bluetooth
5457
camera
35
cleaning
100
communications, network
52
59
configuring settings 48
default settings
110115
described
2
documents, capturing 32
features
3
GPS
39
imager 24
images, capturing
29
keypads, using
12
LEDs, understanding 23
miniSD card
37
phone
4648
power management 8
reading bar codes
25
resetting
97
screen 18
security, wireless
5970
signatures, capturing
32
SIM card
37
SmartSystems Foundation
44
specifications
102104
system software
82
troubleshooting
8993
upgrading
82
CN4e
described
2
keypads, illustrated
12
scan button locations
26
Windows Mobile keys
14
See also CN4 series computers.
CN4NI
described
2
Index
128 CN4 Mobile Computer User’s Manual
cold boot, performing
98
color-coded keys
13
communications
802.11, configuring
53
available protocols
102
Bluetooth, configuring 5457
configuring CN4 for network
52
default settings
113
Ethernet, configuring 53
phone, activating
46
security, wireless
59
serial 57
troubleshooting wireless
network
94
USB
57
configuration commands,
troubleshooting
89
configuration number, finding 88
configuring the CN4
48
802.11 communications
53
applications, auto-launching 75
backlight
22
Bluetooth
54
cell phone 46
certificates, loading
68
Ethernet
53
GPS 39
Intermec Settings
4852
network communications
52
phone 46
power management profiles,
choosing
9
power timeout values 10
security, wireless
59
SmartSystems console
49
vibrate mode
18
volume, for cell phone
16
volume, for general audio
17
WAN
4648
console
49
core messaging service settings,
default
115
D
data collection settings, default
110
data rates
103
decode security settings, default
112
default settings
110115
communications
113
core messaging service 115
default settings (continued)110115
data collection
110
decode security 112
device
113
device monitor
115
GPS 115
imager
112
symbology
110
symbology option 112
virtual wedge
112
device monitor settings, default
115
device settings, default
113
DEX adapter, described
109
diacritical marks, typing
123
diagnostics, for troubleshooting
99
dimensions, physical
102
display. See screen
downloads for CN4
42
drop specification
103
dust and rain resistance 103
E
EA11 area imager
reading distance, minimum
108
reading distance, typical 107
EA21 area imager
reading distance, minimum
106
reading distance, typical 105
electrical specifications
103
Electronic Serial Number (ESN),
locating
46
eMDI. See Enhanced Mobile
Document Imaging
Enhanced Mobile Document
Imaging (eMDI) application
32
environmental specifications
103
Ethernet adapter, described
109
extended ephemeris
39, 41
F
front speaker, adjusting volume
16
FTP server, using to install
applications
75
Funk security
802.1x
63
described
60
LEAP
64
profile, choosing 61
WEP
64
WPA
61
Index
CN4 Mobile Computer User’s Manual 129
G
Good Read LED
described
23
troubleshooting 93
GPS
configuring
39
default settings 115
extended ephemeris
39, 41
GPSID, overview
39
green battery LED, described 6
green key, using
13
green status LED, described
23
GSM/EDGE activation
48
H
hardware specifications
102
humidity specification
103
I
iConnect application
described
58
enabling FTP server
75
icons
battery
6
understanding
20
IDL (Intermec Developer Library)
72
iGPS settings
41
Image Capture application 29
using in your application
76
XML example
80
XML file 77
imager
24
bar codes, reading
25
capturing images 29
cleaning window
100
default settings
112
documents, capturing
32
EA11 reading distances
107, 108
EA21 reading distances
105, 106
Enhanced Mobile Document
Imaging application
32
Image Capture application
29
improving performance
28
ink capture
32
predefined mode, choosing
28
reading distance, minimum
106
reading distance, typical
105
scan button locations, CN4
25
scan button locations, CN4e
26
signature capture 32
imaging options 102
ink capture, described
32
installing
applications
73
battery
4
miniSD card 37
SIM card
37
InstallSelect, using to free up
memory
80
Intermec
Product Support, contacting
88
Resource Kits, described 72
value-add functionality,
described
82
Intermec Developer Library (IDL)
72
Intermec Settings
described
48
menu items, hiding
52
restoring menu items
52
SmartSystems console, opening
from
49
using on CN4
50
Internet Explorer, using to find OS
version
89
K
keypads
102
illustrated 12
keypresses, listed
118124
language-specific characters
123
troubleshooting keys 89
using
12
using color-coded keys
13
keypresses, listed 118124
Knowledge Central website
88
L
launching applications
automatically
75
LCD. See screen.
LEAP security, configuring
64
LEDs
battery
6
status
23
locked computer, troubleshooting
90
lower power mode
15
M
magnetic card reader, described
110
Index
130 CN4 Mobile Computer User’s Manual
Master Subsidy Lock (MSL)
47
memory
102
freeing up virtual for
applications
80
installing applications in
72
microprocessor 102
Microsoft security
802.1x
67
choosing 65
static WEP
68
when to use
60
WPA 65
WPA-802.1x
65
WPA-PSK
66
miniSD card
installing
37
specification
102
using to install applications 74
using to upgrade computer
85
Mobile Country Code (MCC)
47
Mobile Directory Number (MDN)
47
Mobile Network Code (MNC)
47
Mobile Station Identification
Number (MSIN)
47
Mobile Station Identifier (MSID)
47
multidock, described
109
My Pictures folder
35
N
network connection icons,
understanding
20
Network ID (NID)
47
Notification LED, described 23
numeric keypad
entering letters and symbols
14
illustrated
12
keypresses, listed
118124
O
Object Store, storing applications
72
operating system
finding version
89
how to upgrade
82
specification
102
operating temperature
103
orange key, using
13
orange LED, described
23
P
persistent storage, how to upgrade
82
phone
CDMA, activating
46
configuring 46
GSM/EDGE, activating
48
making a call
48
mike and speaker, illustrated 16
power management profiles,
described
10
turning on and off
48
using
15
vibrate, enabling
18
physical specifications 102
Pictures & Videos, using to take
pictures
36
pictures, storage location 35
power
backlight settings
22
battery 311
battery life, maximizing
8
button
15
management profiles
choosing
9
described
10
managing 8
timeout values, customizing
10
Power application, using to check
battery status
7
Power button
15
power specifications
103
predefined modes, for imager 28
printer, Bluetooth, connecting to
56
problems, troubleshooting
8993
product support
calling
88
Knowledge Central website
88
product support, calling
88
Q
quad battery charger, described
109
QWERTY keypad
entering characters
13
illustrated
12
keypresses, listed
118124
Index
CN4 Mobile Computer User’s Manual 131
R
radio
certifications
103
power output 103
radios
802.11
53
Bluetooth 5457
WAN
4648
wireless security
5968
rain and dust resistance 103
reading distances
EA11
107, 108
EA21
105, 106
Ready-to-Work indicator LED,
described
23
recharge temperature 103
recharge times
103
red battery LED, described
6
regulatory approvals 104
reset, performing
97
resource kits, for application
development
72
RS-232 adapter, described
109
S
scan button locations, illustrated
CN4
25
CN4e
26
scan handle, described
110
scanner
Bluetooth, connecting to
55
default settings
112
troubleshooting 9293
Scan-to-Connect
45
screen
18
aligning
21
cleaning
100
icons, understanding
20
no response, troubleshooting
90
specifications
103
stylus, using
19
Windows Mobile Today
18
Screen Off mode
22
security
103
security, wireless
59
802.1x with Funk
63
802.1x with Microsoft
67
certificates, loading
68
LEAP with Funk 64
static WEP
with Funk
64
security, wireless (continued) 59
WEP with Microsoft
68
WPA with Funk 61
WPA with Microsoft
65
Service Programming Code (SPC)
47
signature capture, described
32
SIM card, installing
37
single dock, described 109
SmartSystems Foundation
44
applications, installing
73
AutoDeploy 45
Intermec Settings, using from
console
49
Scan-to-Connect
45
upgrading CN4
84
where to download
45
SmartSystems Platform Bundle
files, described
82
removing features to free up
memory
80
upgrading with miniSD card
85
specifications
102104
communications 102
electrical
103
environmental
103
hardware 102
physical
102
power
103
SSPB. See SmartSystems Platform
Bundle
Standard
118
static WEP
with Funk
64
with Microsoft
68
storage temperature
103
stylus, using
19
super capacitory, as backup power
4
Suspend mode
15
symbologies
configuring the CN4 to read
48
default settings
110
enabled by default
27
symbology options, default
112
System ID (SID)
47
T
temperatures
103
terminal emulation,
troubleshooting
91
Index
132 CN4 Mobile Computer User’s Manual
touch screen, aligning
21
troubleshooting
8993
802.11 connectivity 90
802.11 network status
94
802.1x security
91
authentication 91
bar codes, reading
92
configuration
89
imager 28
operation
90
turning the CN4 on and off
15
U
upgrade files, downloading
83
upgrading
operating system, overview
82
persistent storage, overview 82
using a miniSD card
85
with SmartSystems Foundation
84
USB adapter, described
109
V
vehicle dock, described
110
vehicle power adapter, described
109
vibrate, enabling
18
virtual memory, freeing up 80
virtual wedge settings, default
112
volume
front speaker, adjusting
16
icon, understanding
20
rear speaker, adjusting
17
W
WAN, configuring
4648
CDMA
46
GSM/EDGE
48
warm boot, performing
98
WEP, static
64
Windows Mobile keys
14
Windows Mobile Today screen,
illustrated
18
wireless
connectivity, troubleshooting
9091
security
5970
wireless LAN specifications 103
Wireless Printing enabler, for
Bluetooth
56
Wireless Scanning enabler 55
wireless security
59
802.1x with Funk
63
certificates, loading
68
LEAP with Funk
64
static WEP with Funk
64
troubleshooting 91
WPA with Funk, configuring
61
WPA security
with Funk
61
with Microsoft
65
WPA-PSK security
with Funk
61
with Microsoft
66
www.intermec.com
downloads for CN4
42, 83
Intermec Developer Library
42,
72
Knowledge Central 88
manuals, downloading
x, xi
Product Support
88
SmartSystems Foundation 45
warranty information
ix
X
XML, for Image Capture
application
77, 80
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
© 2011 Intermec Technologies
Corporation. All rights reserved.
CN4 Mobile Computer User’s Manual
*935-029-003*
P/N 935-029-003
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec CN4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CN4 in the language / languages: English as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info