595597

Intermec CN2 Manual

111
Zoom out
Zoom in
Previous page
1/134
Next page
Chapter 5 — Troubleshooting and Maintaining the CN2
CN2 Handheld Computer User’s Manual 99
11 The “Need Reboot” message appears and Cold Boot is
selected.
12 Press Enter. The CN2 cold boots and the Refreshing File
System status box appears.
13 If the Confirm File Replace dialog box appears, tap Yes To
All. The CN2 finished rebooting, and your operating system
is updated.
Upgrading the Persistent Storage Manager Files
To upgrade the Persistent Storage Manager (PSM) files for your
CN2, you need:
• the device upgrade ZIP file containing the PSM files. This file
is available from the Intermec web site at www.intermec.com.
Go to Service & Support > Downloads.
• an SD card reader.
To upgrade the PSM files
1 Copy the device upgrade ZIP file to your PC, and unzip the
PSM files. You should see these folders:
• 2577
• DOCImage
2 Remove the SD card from the CN2 and place it in the SD
card reader. For help, see “Using the Optional SD Card” on
page 22.
3 Copy the 2577 and DOCImage folders to the SD card.
4 Install the SD card in your CN2.
5 Cold boot your CN2. For help, see “Cold Booting the CN2”
on page 95. A dialog box appears telling you that it is
updating the PSM. When this process is complete, the CN2
cold boots again and installs the files.
After the CN2 cold boots, the Refreshing the File System
dialog box appears. Your CN2 is loaded with the new PSM
files.
6 Remove the SD card.
… 111 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec CN2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CN2 in the language / languages: English as an attachment in your email.

The manual is 7,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info