Chapter 2 — Connecting and Configuring the CK61
CK61 Handheld Computer User’s Manual With Windows Mobile 55
6 Enter the SSID (Network Name) if different than the profile name.
7 Click OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.
3 For Association, choose Open or Shared to match the settings on
your access point.
4 For Encryption, choose WEP.
5 From the Data TX Key list, select the key you want to use for
transmitting data.
6 Define a value for the keys you want to use. You can define up to
four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes
long depending on the capability of the radio. Set a 5-byte value
for 64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must
be preceded by 0x and contain 5 or 13 hex pairs.
7 Tap OK.
Configuring WPA-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.
3 For Association, choose WPA.
4 For Pre-Shared Key field, enter the passphrase as ASCII. The
passphrase must be 8 to 63 characters and match the passphrase
on the access point.
5 Tap OK.
Configuring WPA2-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.
3 For Association, choose WPA2.
4 For Encryption, choose TKIP or AES.
