Manual Intermec CK61 Windows Mobile (page 30 of 128) (English)

595588

Zoom out

Zoom in

1/128

Chapter 1 — Using the CK61 Mobile Computer

18 CK61 Mobile Computer User’s Manual With Windows Mobile

The Read-to-Work indicator (blue light) is for the SmartSystems

Foundation application that is part of a wireless network using all

Intermec devices. For more information, see “Configuring the CK61

Using SmartSystems Foundation” on page 24 or contact your

Intermec representative. Selected application software programs may

also use the blue light, either steady or flashing, for other purposes.

Scanning Bar Codes

Use the area imager to scan and enter bar code data. The CK61

supports reading 1D and 2D images, composite and postal codes. If a

bar code is not enabled, you need to go to Intermec Settings to enable

or disable symbologies. For help, see “Configuring the CK61 With

Intermec Settings” on page 23.

Scanning With the Area Imager

The CK61 has an area imager that can scan 1D and 2D bar code

symbologies, composite, and postal codes. It also supports

omnidirectional (360°) scanning where you can position the CK61 in

any orientation to scan a bar code label. Using the 2D imager is like

taking a picture with a digital camera.

To use the area imager

1 Press the Power button to turn on the CK61, point the scanner

window a few inches from the bar code label, and hold steady.

2 Press the Scan button and center the red aiming beam over the bar

code label. The aiming beam is smaller when the imager is closer

to the bar code and larger when it is further away.

When a bar code label is successfully read, a high beep is emitted and

the Good Read LED lights briefly. Release the Scan button.

Do not look directly into the window area or at a reflection of the

laser beam while the laser is scanning. Long-term exposure to the

laser beam can damage your vision.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intermec CK61 Windows Mobile in the language / languages: English as an attachment in your email.

The manual is 2,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intermec CK61 Windows Mobile Manual

Product: