Manual Intermec 751G (page 139 of 156) (English)

595574

139

Zoom out

Zoom in

1/156

Chapter 5 — Network Support

751G Color Mobile Computer User’s Manual 125

Using Static WEP Security

The 751G uses the Wired Equivalent Privacy (WEP) protocol to add

security to your wireless network based on the 802.11b/g standard. To use

WEP security, you need an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security

Use this procedure to set Static WEP security with Funk security.

1 Make sure you have configured the communications and radio

parameters on your 751G and that Funk is your security choice.

2 Open Intermec Settings. Tap (+) to expand Communications > 802.11

Radio > Funk Security > Profile X with “X” being “1” through “4.”.

3 For Association, select “Open” and press Enter.

4 For Encryption, select “WEP” and press Enter.

5 For 8021x, select “None” and press Enter.

7 For Transmit key, select which WEP key to use for encryption of

transmitted data.

8 Define a value for each key, up to four. Enter an ASCII key or a hex key

either 5 or 13 bytes long based on the radio capability. Set a 5-byte value

for 64-bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys

with 0x and make sure the keys use 5 or 13 hex pairs.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intermec 751G in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intermec 751G Manual

Product: