595574

Intermec 751G Manual

134
Zoom out
Zoom in
Previous page
1/156
Next page
Chapter 5 — Network Support
120 751G Color Mobile Computer User’s Manual
The 751G provides three types of security for your wireless network: Wi-Fi
Protected Access 2 (WPA2/802.11i), WPA, and WEP. 802.1x should be
referred to as an authentication method used for WPA and WPA2. Another
authentication method for WPA and WPA2 would be the Pre-Shared Key
(PSK).
Choosing Between Microsoft and Funk Security
Before you can implement a security solution on the 751G, you need to
choose between Microsoft and Funk security:
• By default, Funk security is enabled. It provides everything you get with
Microsoft security plus the addition of Cisco Compatible Extensions
features. It also provides additional authentication types like EAP-TTLS,
LEAP, and EAP-FAST.
• Microsoft security, with its Microsoft Zero Config feature, is also
available. To switch to Microsoft security, go to “Configuring Microsoft
Security” on page 126 to start.
Configuring Funk Security
You can define up to four profiles for your Funk Odyssey security.
Different profiles let your 751G communicate in different networks
without having to change all of your security settings. For example, you can
set up one profile for the manufacturing floor and one for the warehouse.
EAP-TLS
(Transport Layer
Security)
Based on the TLS (Transport Layer Security) protocol widely used to secure web sites. This requires
both the user and authentication server have certificates for mutual authentication. While cryptically
strong, this requires corporations that deploy this to maintain a certificate infrastructure for all users.
EAP-TTLS
(Tunneled
Transport Layer
Security)
This protocol provides authentication like EAP-TLS (see page 120) but does not require certificates
for every user. Instead, authentication servers are issued certificates. User authentication is done using
a password or other credentials that are transported in a securely encrypted “tunnel” established using
server certificates.
EAP-TTLS works by creating a secure, encrypted tunnel through which you present your credentials
to the authentication server. Thus, inside EAP-TTLS there is another inner authentication protocol that
you must configure via Additional TTLS Settings.
Note: Your security choice does not depend on your authentication server.
For example, you can choose Funk security if you use Microsoft Active
Directory® to issue certificates.
1 Select Start > Settings > Control Panel, then double-tap the Intermec
Settings icon.
2 Tap (+) to expand Communications > 802.11 Radio > Funk Security.
Authentication (continued)
… 134 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec 751G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec 751G in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info