595573
100
Zoom out
Zoom in
Previous page
1/114
Next page
Appendix A — Specifications
90 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual
If you are using the linear imager, the standard range laser, or the long range
laser, the computers support these bar code symbologies:
Scanner Reading Distances
Typical reading distances are done in an office environment using office
lights (4 lux). Minimum distances are measured in the dark (0 lux). Both
reading distances are provided in respective scan engine integration guides.
Contact your local Intermec representative for more information.
Below are minimum standard reading distances for the 741 and 751 built
with integrated scan engines. When correctly mounted, and exit window
reduces reading distances by about 4% for all scan engines, with the
exception of the EL10 with its reading distances reduced by about 25%.
Supported Symbologies
Codabar Micro PDF417
Codablock A •MSI
•Codablock F •PDF417
•Code 11 •Plessey
Code 2 of 5 RSS 14
•Code 39 •RSS Limited
•Code 128 •RSS Expanded
EAN.UCC Composite Telepen
Interleaved 2 of 5 TLC 39
•Matrix 2 of 5 •UPC/EAN
EA11 Standard Minimum Reading Distances With 0.04 Inch Setbacks
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mils)
0.20 mm (8 mils)
0.25 mm (10 mils)
0.5 mm (20 mils)
7.26 cm (2.86 in)
3.96 cm (1.56 in)
3.45 cm (1.36 in)
4.98 cm (1.96 in)
12.09 cm (4.76 in)
20.98 cm (8.26 in)
25.04 cm (9.86 in)
40.28 cm (15.86 in)
UPC/EAN 0.33 mm (13 mils) 4.98 cm (1.96 in) 29.62 cm (11.66 in)
PDF417 0.168 mm (6.6 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
6.25 cm (2.46 in)
4.47 cm (1.76 in)
4.98 cm (1.96 in)
13.87 cm (5.46 in)
21.74 cm (8.56 in)
33.43 cm (13.16 in)
Data Matrix 0.191 mm (7.5 mils)
0.254 mm (10 mils)
0.381 mm (15 mils)
3.71 cm (2.46 in)
5.98 cm (2.35 in)
*
16.41 cm (6.46 in)
20.73 cm (8.16 in)
27.58 cm (10.86 in)
* Minimum distance depends on symbology length and scan angle
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec 751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec 751 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info