595573

Intermec 751 Manual

56
Zoom out
Zoom in
Previous page
1/114
Next page
Chapter 3 — Configuring the Computer
46 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual
Configuring 802.11 Radio Communications
The 751 Mobile Computer has an internal 802.11 b/g radio to transfer
data using wireless communications. This section of the manual assumes
that you have already set up your wireless communications network
including your access points. If you are using a UDP Plus network, have
your Intermec Application Server communicate with a host computer.
Your computer supports these network protocols:
•TCP/IP
• UDP Plus
The next sections explain the parameters you need to configure for the 751
to work in your wireless network.
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the 751 communicates with a host computer directly
using TCP/IP. The access point acts as a bridge to allow communications
between the wired network and the wireless network.
To use wireless communications in a TCP/IP network
1 Go to Start > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on each 751 in the network:
• Network name (SSID)
• IP settings (if not using DHCP)
3 Make sure that the 751 is talking to the network and that the network
can see the 751.
4 Configure security. For help, see “Configuring Security on the Wireless
Network” on page 47.
The easiest way to configure the network parameters on the 751 is to use
Intermec Settings. For help, see “Configuring the Computer With
Intermec Settings” on page 38.
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the 751 communicates with a host computer
through the Intermec Application Server. The Intermec Application Server
translates UDP Plus packets on the wireless network into TCP/IP packets
on the wired networks and vice versa. The access point acts as a bridge to
allow communications between the wired network and the wireless
network.
To use wireless communications in a UDP Plus network
1 Go to Start > Settings > the Systems tab > Intermec Settings.
2 Configure these network parameters on the 751:
• Network name (SSID)
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec 751 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec 751 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info