595572

Intermec 741 Manual

27
Zoom out
Zoom in
Previous page
1/114
Next page
Chapter 1 — Using the Computer
741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual 17
To scan bar code labels with the laser scanner or linear imager
1 Press I/O to turn on the computer.
2 Point the scanner window at the bar code label and hold the computer
at a slight angle 15 to 25 cm (6 to 10 in) from the label.
3 Press either side Scan button, or pull the trigger on a handle, and direct
the red beam so that it falls across all bars in the bar code label.
Use this test bar code:
Code 39 Test Bar Code
*123456*
*123456*
When the computer successfully reads a bar code label, you hear a high
beep and the green Scanning LED turns on briefly.
4 Release the side Scan button or the trigger.
To scan a PDF417 or Micro PDF417 bar code with the linear imager
1 Press I/O to turn on the computer.
2 Point the scanner window at the PDF417 or Micro PDF417 bar code
label and hold the computer at a slight angle 15 to 25 cm (6 to 10 in)
from the label.
3 Press either side Scan button, or pull the trigger on a handle, and direct
the red beam so that it falls across the top row of the bar code label.
Use this test bar code:
PDF417 Test Bar Code
*123456789abcdefg*
4 Move the beam down all rows of the bar code label. The computer
clicks as it reads each row.
5 The computer emits a high beep and the Scanning LED turns on briefly
when the computer successfully reads the entire bar code label.
6 Release the side Scan button or the trigger.
Scanning With an Area Imager
If the computer has an area imager, use the following procedure to practice
scanning a bar code. The area imager lets you scan 2D bar code
symbologies and supports omni-directional (360°) scanning. Omni-
directional scanning means that you can position the computer in any
orientation to scan a bar code label. Using the area imager is very similar to
taking a picture with a digital camera.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intermec 741 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intermec 741 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info