629286

Interlogix NXG-1820-EUR Touch Screen Manual

2
Zoom out
Zoom in
Previous page
1/6
Next page
2 / 6 P/N 230444 • REV A • ISS 01SEP15
• Red – critical messages including alarm, please resolve
this issue to ensure your system operates correctly
• Yellow – zones bypassed
• Blue – system (fault) conditions present, please fix at
earliest opportunity or system is armed
• Green – system is normal
Arm Your System In Away Mode
Enter a valid PIN code to unlock the screen.
Touch the Away or Away + button to arm your system in Away
mode:
The icon will change to red when alarm system is set in away
mode.
A buzzer will sound (beeping) announcing the exit delay.
Leave the premises during this time.
If your system has multi-partition control enabled, the Away +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access.
Arm Your System In Stay Mode
Enter a valid PIN code to unlock the screen.
Touch the Stay or Stay + button to arm your system in Away
mode:
The icon will change to yellow when alarm system is set in stay
mode.
In Stay mode, typically one or more zones will be bypassed.
See colour code section on top of the display to read the zones
that are bypassed or go to Status menu.
If your system has multi-partition control enabled, the Stay +
button will be displayed.
Also a number will appear above the icon indicating the
number of partitions are in the state that the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which partitions and at
what time/day that user has access.
Disarm One Or More Partitions
Enter a valid PIN code to unlock the screen.
Typically the buzzer will sound (continuous tone) announcing
the entry delay.
Touch the Off or Off + button to disarm your system:
If your system has multi-area control enabled, the Off + button
will be displayed.
Also a number will appear above the icon indicating the
number of partitions that are in the state the icon represents.
A valid PIN code will need to be entered to determine what
permissions they have, this includes which areas and at what
time/day that user has access.
Disarm After An Alarm
When an alarm condition occurs the screen may make a
constant beeping sound.
Enter a valid PIN code to unlock the screen.
The colour coded section provides further information about
the alarm condition, including the zone description (if
applicable).
For more details, touch the Status button. The partition and
zone(s) that caused the alarm will be displayed. Touch the
partition or zone number on the screen for a description.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interlogix NXG-1820-EUR Touch Screen at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interlogix NXG-1820-EUR Touch Screen in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info