478964
19
Zoom out
Zoom in
Previous page
1/45
Next page
! COOL-ER and CoolerBOOKS User Manual from Interead.com V1.1 19 of 45
Firmware updates
Occasionally we will offer you the option to
upgrade your COOL-ER software if you wish. This
is called a firmware upgrade.
Preparation
Download COOL-ER firmware upgrade from the
CoolReaders site
Load unzipped firmware files onto an empty SD
Card.
SD Firmware update
1. Connect your COOL-ER to a computer
via your USB cable for uninterrupted power
during upgrade.
2. Insert firmware loaded SD card into slot on
top edge of device. The SD card should be
inserted with the cut-off corner at the
bottom and the writing on the front. Ensure
you press the card home until it is flush
with the edge of your COOL-ER.
3. Press and hold the control wheel central
button and Library button (E)
simultaneously. Do not release the buttons
until after step 5.
4. Press reset, whilst still holding the control
wheel central button and Library button.
5. Wait for LED on front face to flash, then
release the control wheel central button
and Library button.
6. Upgrade screen will appear after several
seconds.
7. ‘Upgrade file system’ text will show
Chinese character text and then progress to
‘upgrade OK’ in English when upgrade is
complete. (Time taken is dependent on
upgrade).
8. Finally, remove memory card (to release it
press it in), press ’reset’ and disconnect
from computer to use COOL-ER.
If you encounter any issues, repeat instructions
from point 1.
For Adobe Digital
Editions (ADE) users
only
(Please go straight to Preparation if you
do not use ADE. If you don't know if you
use ADE then you probably don't.)
To retain your Digital Rights Managed
(DRM) documents during the upgrade:
a) Open ADE on your computer
b) Connect your COOL-ER to computer
via USB cable.
c) Control/Shift/D to deactivate ADE
during upgrade.
To re-activate ADE following upgrade,
connect COOL-ER via USB and re-open
ADE.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interead Cool-er at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interead Cool-er in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info