Manual Inter-Quartz 1-LD2730 (page 10 of 24) (English, German, Danish, Swedish, Finnish)

534274

Zoom out

Zoom in

1/24

Instruction manual

Congratulations on the purchase of your new watch.

Please read the instruction manual before using the

watch.

Features

Time and date display

Stop watch

Alarm and hourly chime

Light

Function modes

Press MODE to switch between the different function

modes of the watch

Time display > stop watch > alarm setting > time

setting > time display

Time setting

Press MODE 3x to go from the time display mode to

time setting mode. The seconds will blink on the

display.

Press START to reset the seconds and confirm your

setting by pressing RESET. The minutes will blink on

the display. Press START to set the minutes and

confirm your setting by pressing RESET.

The hours will blink on the display. Press START to

set the hours. In 12 hour mode “A”(AM) or “P”(PM)

will appear on the display. In 24-hour mode “H” will

appear. Set the time 24 hours ahead to switch

between 12 or 24 hours modes. Confirm your setting

be pressing RESET. The day will blink on the display.

Press START to set the day and confirm your setting

by pressing RESET.

Set the month and day in the same way.

Press MODE to return to the normal time display.

Light

Press LIGHT to activate the display light.

Date display

Press and hold START in normal time display mode

to display the date.

Alarm setting

Press MODE 2x to go from normal time display mode

to the alarm time display. The hours of the alarm time

will blink on the display. Set the hours by pressing

START and confirm your setting by pressing RESET.

The minutes will blink on the display. Press START to

set the minutes and press RESET to confirm your

setting.

Press MODE to return to the normal time display.

The alarm can be activated or deactivated by

pressing and holding RESET and pressing START

while holding RESET. If the alarm is activated the

bell symbol will appear on the display.

Hourly chime

To activate the hourly chime press and hold RESET

in time display mode and press MODE while holding

RESET. If the hourly chime is activated all day of the

week symbols will appear.

Stop watch

Press MODE 1x to go from normal time display mode

to the stop watch.

Press START to start or stop the stop watch. Stop

the stop watch and press RESET to reset the

recorded time.

Press RESET while the stop watch is running to

record a lap time. The stop watch will continue

running internally. Press RESET again to return to

the running time.

Cleaning instructions

Clean the product with a dry, lint-free cloth. A glasses

cleaning cloth is ideal.

Disposal

This electrical appliance may not be disposed of with

normal household waste. Please hand it in at an

appropriate local collection point.

Replacing the battery (CR2025)

Battery replacements should be performed by an

expert to avoid damaging the case or gaskets.

Please dispose of your batteries in the appropriate in-

store containers. Batteries do not belong in household

waste.

Please dispose of your batteries properly in

containers especially set up at retailers. Batteries do

not belong in household waste.

Warranty

We provide a 3-year warranty for this item. The

warranty period starts from the date of sale (receipt,

proof of purchase). Within this period we rectify all

faults which are attributable to material and

manufacturing defects at no cost. For damage which

is attributable to improper treatment, e.g. dropping,

knocking, or water damage, there is no warranty

claim.

digi-tech ®, Valterweg 27A, D-65817 Eppstein

-1- -2-

-3-

G/I/c G/I/c G/I/c

LIGHT

MODE

START

RESET

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inter-Quartz 1-LD2730 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inter-Quartz 1-LD2730 Manual

Product: