Page 6 of 8 EN
b) Charging devices through the Powerbank
This Powerbank has a USB entry (output max. 2.1A) and an integrated
USB cable with micro-USB plug (output max. 2A).
There are two possibilities to charge a device through Powerbank:
Possibility 1: Connect the micro-USB connection of the integrated cable
with the micro-USB entry of the device to be charged. The charging
process will start automatically.
Possibility 2: Connect the supplied USB-cable with the USB A entry of
Powerbank and the other ending of the USB cable with the micro-USB
entry of the device to be charged. Within 4 hours approx. the charging
process will start automatically. If you want to connect after, press the
function key to start the charging process manually.
If you first connect the device to be charged and then Powerbank with
the USB-cable, Powerbank will always start automatically.
With Powerbank you can charge two devices contemporaneously, for ex.
a table at the USB A entry and a smartphone by the integrated cable with
the micro-USB plug.
Of course, you can also use your own USB charging cable to connect the
Powerbank with your device. Please note, however, that devices can be
charged only through the USB A port of the Powerbank.
If a device is charged with the Powerbank and the Powerbank has almost
reached its capacity limits, this is signalled by flashing of the last status
LED. Please charge the Powerbank again.
Please note that, when charging a device with a Powerbank nearly 30% of
total capacity is consumed by the charging process alone. This is caused
for example by the loss of power from circuit heat and voltage
conversion.
For optimal performance, the Powerbank must be used regularly. If this is
not the case, fully charge the Powerbank at least every three months.
