799404
15
Zoom out
Zoom in
Previous page
1/28
Next page
13
User Manual
Install the Sealing Ring
1. Place the sealing ring over the sealing ring rack and press it into
place. Press down firmly to ensure there is no puckering.
2. The sealing ring should be snug and should not fall out when the lid
is turned over.
Remove the Sealing Ring
1. Grip the edge of the sealing ring and pull it out from behind the
sealing ring rack.
2. Inspect the rack to ensure it is secured, centered, and an even
height all the way around the lid. If the sealing ring rack is
deformed, do not try to repair it.
Anti-Block Shield
The anti-block shield prevents food particles from coming up through
the steam release pipe, assisting with pressure regulation.
As an integral part of product safety, the anti-block shield must be
installed before use and cleaned frequently.
Remove the Anti-Block Shield
Grip the lid like a steering wheel and use your thumbs to press firmly
against the side of the anti-block shield (pressing towards the side of
the lid and up) until it pops off the prongs underneath.
Install the Anti-Block Shield
Place anti-block shield over prongs and press down until it snaps into
position. Do not attempt to operate the pressure cooker without the
anti-block shield installed.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InstantPot Easy Multicooker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InstantPot Easy Multicooker in the language / languages: English as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info