799596

Instant Pot Pro Manual

49
Zoom out
Zoom in
Previous page
1/58
Next page
instantpot.com | 49
Care, cleaning and storage
Clean your Instant Pot Pro and its parts after each use. Failure to follow these cleaning
instructions may result in catastrophic failure, which may lead to property damage, severe
personal injury.
Always unplug your multicooker and let it cool to room temperature before cleaning.
Never use metal scouring pads, abrasive powders or harsh chemical detergents on any
of the Instant Pot’s parts or accessories.
Let all surfaces dry thoroughly before use, and before storage.
Parts Cleaning methods and instruction
Accessories
• Steam rack Dishwasher safe if placed on the top rack.
Lid and parts
• Steam release valve
• Steam release cover
• Anti-block shield
• Sealing ring
• Float valve
• Silicone cap
• QuickCool cover
• Condensation collector
Dishwasher safe if placed on the top rack.
Remove all the parts from the lid before cleaning. See Care, cleaning and storage:
Removing and installing parts.
• With the steam release valve and anti-block shield removed, clean the interior of
the steam release pipe with a pipe cleaner to prevent clogging.
• To drain water from the lid after dishwashing, grasp the lid handle and hold the
lid vertically over a sink, then turn it 360°— like turning a steering wheel.
• After cleaning and draining, store the lid upside down on the multicooker base
to allow it to air dry completely.
• Store sealing rings in a well-ventilated area to decrease residual odor of avorful
meals. To eliminate odors, add 1 cup (250 mL / ~8 oz) water and 1 cup
(250 mL / ~8 oz) white vinegar to the inner pot, then run Pressure Cook for
5 to 10 minutes and QR pressure.
• Check the condensation collector after each use and empty and clean it as
needed. Do not allow food or moisture to sit in the condensation collector,
as harmful bacteria may result.
Inner pot
Dishwasher safe.
• Acute hard water staining (rainbow, bluish or white discoloration) may require
scrubbing with a sponge dampened with vinegar or a nonabrasive cleanser like
Bar Keeper’s Friend.
• For tough or burned food residue, add boiling water and dish soap to the inner
pot and let it sit for a few hours for easy cleaning.
• Make sure all exterior surfaces are dry before placing the inner pot in the
multicooker base.
Power cord
Wipe only.
• Use a barely damp cloth to remove particles from the cord.
• Wrap it around the multicooker base and tuck the end into the cord holder.
Multicooker base
Wipe only.
• Wipe the inside of the outer pot as well as the condensation rim with a barely
damp cloth. Allow them to dry completely before inserting the inner pot.
• Clean the multicooker base and control panel with a soft, barely damp cloth
or sponge.
Some discoloration may occur after machine washing, but this will not affect the multicooker’s safety or performance.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Instant Pot Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Instant Pot Pro in the language / languages: English as an attachment in your email.

The manual is 3.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info