799673
14
Zoom out
Zoom in
Previous page
1/30
Next page
14
Smart Program Settings
Function Description
Standby
When the oven is plugged in, the display turns on and shows OFF to
indicate that it is in Standby mode. You may select a Smart Program when
in Standby mode.
Start The green Start key illuminates after a Smart Program is selected. Press
Start to begin cooking.
Pause
Open the oven door to pause the Smart Program once it has started.
When the door is open, the oven light will come on. Close the oven door
to resume the Smart Program.
Cancel Press Cancel to stop a Smart Program at any time. The oven returns to
Standby mode and the display indicates OFF.
Convect Once a Smart Program has begun, press Convect to toggle between HI
(High) and LO (Low) convection fan speeds. Refer to Smart Programs.
Rotate
Once a Smart Program has begun, press Rotate to turn the rotisserie
mode on or off.
Note: Not applicable to Toast or Bake.
Oven light on or off Press the Presets dial to turn the cooking chamber light on or off. The light
will turn off after 1 minute of inactivity.
Adjust and Save
Smart Program Time
and/or Temperature
Smart Programs are designed with optimal time and temperature settings.
Once a Smart Program or Preset has been selected, the time and
temperature can be adjusted using the Time/Temp dial to suit your
individual preferences. The new adjusted time and/or temperature is
saved in memory once you press Start.
Change Temperature
Scale (°F or °C)
When in Standby mode, press and hold the Presets dial for 3 seconds to
change between Fahrenheit (˚F) and Celsius (˚C).
Note: Temperature scale adjustments must be made when in Standby
mode.
Turn Sound On or
Off
When the oven is in Standby mode, press and hold both dials (Presets and
Temp/Time) for 3 seconds to turn the sound on (S On) and off (SOFF).
Note: Error alerts cannot be silenced.
Reset Individual
Smart Programs
When the oven is in Standby mode, press and hold the desired Smart
Program button for 3 seconds. The appliance beeps when the Smart
Program has been restored to the factory default setting.
Reset All Smart
Programs
When the oven is in Standby mode, press and hold Cancel for 3 seconds.
The appliance will beep when all Smart Programs have been restored to
the factory default settings.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Instant Omni Plus Toaster Oven at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Instant Omni Plus Toaster Oven in the language / languages: English as an attachment in your email.

The manual is 2.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info