799685

Instant Ace Plus Manual

16
Zoom out
Zoom in
Previous page
1/31
Next page
16
Cleaning Before First Use
NOTICE If you are not ready to start blending, allow the pitcher to air dry fully before storing.
Before using the Ace Plus for the rst time, follow the steps below to clean the
pitcher.
1. Connect the power cord to a 120 V power source.
Note: The display is blank until the pitcher is seated on the blender base and the lid is
fully secured.
2. Remove the lid and ll the pitcher with hot water to 32 oz / 1000 ml, as
indicated on the pitcher.
3. Place the lid on the pitcher and press down rmly, then turn the lid clockwise
until it clicks into place.
Note: The lid braces (located on the sides of the lid) must t over the glass lid-brace
catches (located on the pitcher).
4. Place the pitcher on the blender base by aligning the position indicator
near the bottom of the pitcher to the position indicator near the top of the
blender base.
The display indicates OFF when the pitcher is seated correctly.
Note: The blender will not start until the pitcher is properly seated and the lid is locked
in place.
5. Turn the lid cap counter-clockwise, then remove the lid cap from the lid.
6. Add a minimal amount (1-2 drops) of dish soap to the pitcher.
Note: Too much dish soap may result in excess foam, which can cause the pitcher to
overow.
7. Fit the lid cap into the hole in the lid, then turn the lid cap clockwise until it
clicks into place.
8. Touch Clean to select the cleaning function.
9. Touch Start/Pause to begin.
10. When the program completes, the display indicates End.
11. Lift the pitcher up and off the blender base.
12. Ensuring the bottom of the pitcher remains dry, rinse the pitcher, lid and lid
cap with warm, clear water.
You’re ready to start using your Instant Ace Plus!
WARNING Do not reach into the pitcher while the blender is in use. Rotating blades can cause
damage and serious injury. Do not put hands, spatulas, or any other utensil into the
pitcher while the blender is running.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Instant Ace Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Instant Ace Plus in the language / languages: English as an attachment in your email.

The manual is 1.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info