738442
14
Zoom out
Zoom in
Previous page
1/32
Next page
STEP 7
A) Begin by placing the Lower Guide Rod Mount (26) on the Main Upright (2) as shown with
the flanges for bolt 105 towards the front of the gym. Attach the mount using two M10*70
bolts (102). Tighten the bolts now.
B) Attach the Guide Rods (29) to the Lower Guide Rod Mount using two M10*35 bolts (105).
Tighten the bolts now. Do not allow the Guide Rods to bend the mounting bracket while
performing the next steps.
C) Place the Shroud Plate (33) and the Guide Rod Spacer Plate (65) on top of the mount and
attach with two M10*60 bolts (104). Do not tighten now.
D) Slide the Rubber Donuts (67) and 20 Weight Plates (70) onto the Guide Rods.
E) Slide the Top Weight/Selector Stem (77) onto the Guide Rods.
F) Using the 6# Allen wrench, attach the Upper Shroud Mount Bracket (9) to the other Shroud
Plate. Turn the bolts only about two turns each until the bracket is fully seated to the
plate. The bolts will bind if turned more than a couple of turns sequentially.
G) Now place the whole Upper Shroud Mount Assembly on the Guide Rods and bolt it to the
top of the Main Upright using two of the M10*70 bolts (102). Tighten this hardware, and
Step C hardware, now. Ensure that all the hardware is tight.
H) Insert the weight stack pin into the weight plates.
PAGE 11
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M5 in the language / languages: English as an attachment in your email.

The manual is 8,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info