24 GM875-320-001PZ Linkage Bar 3 67 0113-710-458 Bolt, M10 x 45mm L 2
25 GM875-330-001PZ Linkage Bar, Pin 1 68 0111-010-018A M10 x 100mm L 2
26 GM875-310-001 Back Pad Mount 1 69 0110-010-108 M10 Lock Nut 2
27 GM875-400-001 Seat Pad 1 70 6mm Wrench 1
28 GM875-400-002 Back Pad 1
29 SHC2 Shroud 1
30 GM660-820-001 Short D-Handle 4
31 GM875-351-001PZ Floating Pulley Assembly 2
32 GM872-381-005 Shroud Bracket 2
33 GM872-561-004 T Pins 6
34 GM880-101-016 Cable "U" Bracket 6
35 0200-070-082 Spring Clip 6
36 0113-206-138A M6 x 12 Button Head Bolt 6
37 GM880-201-032 M6 T-Nut 6
38 GM851-881-009 Plastic Ball 6
39 GM875-500-001 Upper Cable Assembly 1
40 GM875-500-002 Lower Cable Assembly 2
41 GM692-880-001 3 1/2" Pulley 2
42 GM870-880-001 4 1/2" Pulley 2
43 Multi "D" Ring Handle 2
Page 3
LP3 MAIN CABLE
GM872-500-005
LP3-M5 CABLE
GM872-500-006
CABLE CHART
UPPER CABLE (5,920mm)
GM875-500-001
MIDDLE CABLE (4,670mm)
GM875-500-002
PAGE 4
Step 1
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
Attach the Main Upright (11) to the Main Base (1) using 2- M10x40 Hex bolts (46) and A2- M10 Washers (62).
Attach 2- 4-1/2” Pulleys (42) to the Main Upright (11) using 2- M10x50 Hex bolts B(48), 4- M10 Washers (62), and 2- M10 Lock Nuts (65).
2-M10x40 Hex Bolts
2-M10 Flat Washers
11
2-M10x50 Hex Bolts
4-M10 Flat Washers
2-M10 Lock Nuts
42
1
12
11
1-M10x75 Hex Bolts
2-M10 Flat Washers
1-M10 Lock Nut
PAGE 5
Step 2
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
Attach the Rear Base (12) to the Main Upright (11) using 1- M10x75 Hex bolts (50), A2- M10 Washers (62), and 1- M10 Lock Nuts (65).
PAGE 6
Step 3
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
Attach the Left Base Brace (13) and Right Base Brace (14) using a M10x125 Hex Bolt A(54), 2- M10 Washers (62), and 1- M10 Lock Nut (65).
Attach a 3-1/2” Pulley (41) to both sides of the Rear Base (12) using 2- M10x110 Hex Bbolts (53), 4- M10 Washers (62), and 2- M10 Lock Nuts (65).
13
14
30
2-M10x110 Hex Bolts
4-M10 Flat Washers
2-M10 Lock Nut
1-M10x125 Hex Bolts
2-M10 Flat Washers
1-M10 Lock Nut
13
12
31
8-M10x20 Hex Bolts
8-M10 Flat Washers
12
15
15
PAGE 7
Step 4
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
Insert the Upright Supports (15) to the Rear Base (12) using 8- M10x20 Hex bolts A(44) and 8- M10 Washers (62).
PAGE 8
Step 5
DO NOT TIGHTEN ANY HARDWARE IN THIS STEP
Attach the Center Upright Brace (18) to the Main Upright (11) using 1- M10x75 AHex bolts (50), 2- M10 Washers (62), and 1- M10 Lock Nuts (65). Then attach
the Center Upright Brace (18) to the Upright Supports (15) using 4- M10x85 Hex
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Inspire M1 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Inspire M1 in the language / languages: English as an attachment in your email.
The manual is 2,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.