590371
10
Zoom out
Zoom in
Previous page
1/20
Next page
8
Insignia NS-R2001 AM/FM Stereo Receiver
www.insigniaproducts.com
Installing batteries
To install the batteries:
1 Remove the cover.
2 Insert two AAA batteries into the compartment
matching the polarity indicated.
3 Replace the cover.
Using the remote control
Use the remote control by pointing it towards the
receivers remote sensor window. Objects between
the remote control and sensor window may
prevent proper operation.
Use the remote control within about 23 feet
(7 meters) of the receiver and within 30 degrees of
perpendicular to the front of the receiver.
Using your receiver
Listening to audio on your receiver
To listen to audio on your receiver:
1 Press the POWER ON button on the receiver.
The STANDBY indicator lights blue.
2 Press the POWER ON button on the remote
control or the ON/STANDBY button on the
receiver to turn the receiver on. The Standby
indicator turns off.
3 Turn on devices connected to the receiver.
4 If you connected a video device, such as a DVD
or Blu-ray player:
a) Select that device's input on the TV.
b) Turn your TV speakers off if you only want
the audio to come from your receiver.
Caution
Do not use Ni-Cd rechargeable batteries in this
remote control.
Remove the batteries if they are not to be used for an
extended period of time.
Cautions
Do not expose the remote control to shock. In
addition, do not expose the remote control to
liquids, and do not place in an area with high
humidity.
Do not place the remote control under direct
sunlight. The heat may cause deformation of
the remote control.
The remote control may not work properly if the
remote sensor window of the receiver is under
direct sunlight or strong lighting. In such a case,
change the angle of the lighting or receiver, or
operate the remote control closer to the remote
sensor window.
23" (7m)
30°30°
Tips
The following settings are stored in memory before
the receiver is turned off:
INPUT SELECTOR settings
Preset stations.
If the electricity fails or the AC power cord is
unplugged for more than a week, your memory is
cleared.
Tip
You can put the receiver in Standby mode by
pressing the STANDBY button on the remote control
when the receiver is on.
With the receiver in Standby mode, you can also turn
the power on by pressing an Input Selector button
on the remote control.
OR
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Insignia NS-R2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Insignia NS-R2001 in the language / languages: English as an attachment in your email.

The manual is 5,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info