552860
2
Zoom out
Zoom in
Previous page
1/4
Next page
SET ALARM
UP
DOWN
SNOOZE
CHANNEL
Click
Alarm
On/Off
12hr/24hr
switchable
°C/°F
switchable
Enter into
snooze state
Switchable
between CH1,
2 and 3
Standard
mode
Hold
Enter into
clock
setting
Enter into
alarm setting
Clear current
registere CH
Click
Confirm
the setting
One step
forward
One step
backward
SET
Hold
8
steps/second
8 steps/second
backward
Click
Confirm the
setting
One step
forward
One step
backward
ALARM
Hold
8
steps/second
forward
8 steps/second
backward
Click
One step
forward
One step
backward
Choose the
channel
ALARM
of
temperature
Hold
8
steps/second
forward
8 steps/second
backward
3.2 Normal states
A) Hold “SET” for 2 seconds to enter into time setting
B) Click “ALARM” to switch the alarm on/off
C) Hold “ALARM” for 2 seconds to enter into Alarm setting
D) Press “DOWN” to switch between °C/°F
E) When ALARM rings, click “SNOOZE” to enter into the snooze state every 5 minutes
F) Press “CHANNEL” to switch RF channel, CH1 CH2CH3
G) Hold “CHANNEL” key for 2 seconds to clear out all data of current “CHANNEL”
3.3 Manual time set
1. Hold “SET” key for 2 seconds to enter into time setting
2. The sequence of time setting: Year(2000-2099) Month Date Language Hour Minute Time zone Exit
3. The figures will flash during the setting.
4. Press “SET” to confirm the setting, and enter the next setting state
5. Press “UP” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will run forward by 8
steps/second.
6. Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.
7. Moon phase is changed accordingly
8. The system will exit automatically if no key is operated in 8 seconds.
3.4 Alarm set
A) Hold “ALARM” key for 2 second to enter into alarm setting
B) The sequence of alarm setting: Hour Minute exit
C) The figures will flash during the setting.
D) Press “ALARM” to confirm the setting, and enter the next setting state
E) Press “UP” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by
8 steps/seconds.
F) Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.
G) The system will exit automatically if no key is operated in 8 seconds.
4/ FUNCTION AND EFFECT
4.1 The receiving function of RF
A) After installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes.
B) Under normal display mode, hold the “CHANNEL” key for 2 seconds to clear out the channel information
C) If there is no effective signal with same ID code received for the current channel in 35 minutes, the temperature of
that CH will shows “--.-“.
D) The temperature display will resume back when the correct signal is received again
FONCTION
OPERATION
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inovalley SM121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inovalley SM121 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info