800627
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
FILLING THE WATER TANK
1) Make sure the iron is turned off and unplugged from the mains.
2) Check that the steam control button is in the “steam OFF” position.
3) Position the iron on the base and remove the tank by pulling it with the specific handle.
4) Fill the special graduated container with water and carefully pour the water into the tank.
5) Reposition the water tank on the base, up to the position where you hear a click.
Attention: It is recommended to use demineralized water to fill the water tank rather than
tap water, as tap water with more impurities and minerals can create limescale, which can
damage the iron.
Warning: do not fill the tank with hot water.
Warning: never add descaling, aromatic, alcoholic or detergent products into the appliance,
as this could damage the appliance or make it dangerous to use.
USING THE IRON
After filling the water tank, wait 5 minutes to give the filter the time necessary to transform
hard water into soft water, to preventi calcification.
STEAM IRON
When steam ironing for the first time, it is recommended to test on a smooth cloth first to
check that the iron is operating at the correct temperature. Try this without using the steam
mode.
1) Fill the tank following the instructions in the “Filling the tank” section.
2) Connect the iron to the mains and turn the temperature control knob clockwise.
3) To increase the temperature of the iron, turn the regulator clockwise to the desired
temperature level. Reduce the temperature by turning the regulator anti-clockwise. The
temperature indicator light turns on to signal that the iron is heating up; this indicator
goes off when the iron is ready for use.
4) Select the steam setting by pressing and holding the steam button. The steam can be
deactivated at any time by releasing the steam button.
5) Press the “Continuous steam lock” button to have steam continuously, without pressing
the steam button.
6) After use, turn the temperature regulator to ‘MIN’, then disconnect the steam iron from
the mains.
Attention: To produce steam, the temperature regulator must be set to at least the second
temperature level.
Warning: When the iron is not in use, make sure it is placed on its base.
Attention: Do not iron the same area of the fabric for a long time, this can damage the fabric.
Warning: The cable coming out of the iron can become very hot during use, do not touch it.
IRON WITHOUT STEAM
1) The water tank does not need to be filled if you iron without steam; if full The water tank
does not need to be filled to iron without steam; if it is full, it can be emptied or left so that
it is ready for the next use with steam.
2) Plug in the iron and turn the steam control clockwise
3) To increase the temperature of the iron, turn the regulator clockwise to the desired
temperature level. Reduce the temperature by turning the regulator anti-clockwise. The
temperature indicator light turns on to signal that the iron is heating up; this indicator
GB
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-681 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-681 in the language / languages: English, Italian as an attachment in your email.

The manual is 0.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info