Manual Innoliving INN-616 (page 16 of 24) (English, Italian)

801029

Zoom out

Zoom in

1/24

After removing the blades for cleaning or replacement, check that they are properly

realigned during their replacement.

To do this, simply match the teeth of the upper and lower blades, tip by tip. The end

of the teeth of the upper blade should be about 1.2 mm from those of the lower

blade; please refer to the image.

1.2mm

If you have problems realigning the blades, add a few drops of oil and turn the

device on for a few seconds, then turn it off and unplug it.

Slightly loosen the screws and reposition the blades. Tighten the screws again after

this operation.

NOTES

To keep the device in top condition, add drops of oil periodically.

Do not use hair oils, grease, kerosene oil or other solvents. Solvents can evaporate

and leave a layer of grease which may slow down normal blade operation.

The supplied guide combs, once inserted, are positioned comfortably near the

thumb grip, thus allowing you to adjust the length of the cut by sliding the comb

with your ﬁnger.

The comb adds versatility to the product and allows you to gradually change the

length of the cut without using a replacement head.

When the comb is positioned at the lowest level, you will have a fairly short haircut;

pushing the comb higher, the length of the cut will grow in step.

If the comb is positioned at the minimum height, you will have approximately the

same cutting length as comb I (refer to the instructions below).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-616 in the language / languages: English, Italian as an attachment in your email.

The manual is 1.55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Innoliving INN-616 Manual

Product: