800612
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
GB
HOW TO ASSEMBLE
CAUTION: Do not connect the unit to the main power, before
assembling the unit completely and properly.
The only tool you need to carry out this mounting procedure is a screwdriver.
BODY ASSEMBLY
1. Loosen and remove the four screws (04) from the bars (02). Then cross bar A and bar B so
that they interlock. Be sure to align the four holes in the bars with the Outer Tube. Tighten
the Outer tube to the bars with the four screws.
2. Attach the four base caps to the base ends.
3. Loosen and remove the Height Adjustment Collar (06) from the top of the Inner Tube. Put
the Base Decorative Cap (05) down to the base through the tube inside.
4. Replace the Height Adjustment Collar (06) on top of the Inner Tube (03). Pull the Inner Tube
(03) out from the Outer Tube to adjust the tube to the desired height and tighten the collar.
5. Slightly loosen the Switch rotated ring (07) by turning it anticlockwise. Put the Switch
Box down over the Inner Tube and tighten the Switch rotated ring. Make sure it is tightly
secured.
FAN GRILL ASSEMBLY
6. Remove locking nut (08) by turning it anticlockwise from the motor axial.
7. Place the back safety grill (10) into position. The slots on the grill should align with the
plastic rod on the front motor cover. If this is done correctly, the safety grill’s carry handle
will be at the top.
8. Fix the back safety grill (10) into position by replacing the locking nut (08) tightly by hand.
Do not force the locking nut.
9. The groove in the centre of the fan blade (11) aligns with bolt on the motor axial to ensure
correct positioning.
10. Fix the blade into motor axial by gently hand and tightening blade lock (09) by
anticlockwise onto the end of the motor axial.
11. Use 3 screws to install the decorative ring in the middle of front aafety grill.
12. Mount the front Safety Grill(12) onto the back safety Grill(10) by hanging the
top hook clip of front grille over the top of the back safety grill. Close the clasps all around
the grill, nally t the nut and screw through the hole in the bottom edge of the front grill
and tighten.
HOW TO USE
Speed control
The fan speed is controlled by means of a control panel with button. To turn on the
fan simply press one of the speed control keys (1-2-3). To turn it off, press the “O” key.
Oscillation Mode
By pushing down the oscillating level the fan oscillates. When the level is pulled up, the
oscillation function is deactivated.
Inclination adjustment
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-503 in the language / languages: English, Italian as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info