801001
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
INSERTING BATTERIES
Remove the battery cover on the back side of the unit and insert the batteries, respecting
polarities shown in the compartment itself. Replace the battery cover.
Remove the batteries from the product in case of prolonged no-use.
HOW TO USE
Insert the chosen head and turn on the product with the switch selecting the speed and
direction of rotation that best suits the type of treatment to be done on your nails. This
automatically switches the LED over the head so as to facilitate the manicure.
0 = off
R1 = Low speed (clockwise rotation)
R2 = high speed (clockwise rotation)
L1 = Low speed (anti-clockwise rotation)
L2 = High speed (anti-clockwise rotation)
ATTACHMENTS
The product is equipped with 6 interchangeable heads. In order to insert the chosen at-
tachment just press downward, on the contrary to take it away pull it upwards.
Cylinder head (No. 2): To lime and remove dead skin at nail base. It is advisable to move
the attachment with rounding movements from inside to outside.
Polishing disk (No. 3): To polish feet and hands nails. It is advisable to place small amount
of polishing cream on the nail plate, avoiding cuticles. Select and t polishing buffer, polish
on low speed for a maximum of 15 seconds per nail.
2 Rough modelling disks (No. 4 and 5): To remove extensive callous areas and skin
thickening on the heels and on the foot.
Course pointed head (n.7): For removing corns from soles.
CLEANING AND MAINTENANCE
Never immerse the main unit or the case in water or other liquids. Clean the main unit and
the outer case with a soft cloth damp with water. Always dry with care. To clean the acces-
sories: use a soft brush to remove any possible residue of skin or nails. The polishing disk and
cones can be cleaned with a soft brush damp with alcohol.
We recommend the appropriate sterilization and / or disinfection of all parts that come into
contact with the subject to be treated.
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-031 in the language / languages: English, Italian as an attachment in your email.

The manual is 1.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info