Manual Ingo Maurer Birdie (page 10 of 24) (English, German, French, Italian)

812736

Zoom out

Zoom in

1/24

English

flxture) the metal canopy must be earthedl C

Attach the phase and neutral leads to the contacts in the

ceiling terminal (16), and secure the earth lead with the

earthing screw (17) in the metal canopy. Feed the cable (18)

up through the cover plate and arrest it with the grub

screw in the retaining sleeve (19). PIug the lamp terminal

into the ceiling terminal (16) and close the canopy with

the cover plate (14). Screw the nipple (20) with the end

of the suspension cable into the sleeve (13) in the centre

of the cover plate @

Determine the length of the suspension cable.The cable

can be shortened subsequently by pushing the lamp up

towards the ceiling, and lengthened by pressing the

button (21) in the holder to release it (N.8.: the release

mechanism will only work if the cable is slack) @

lmportanC Do not pull the cable through the holder

when it is taut; otherwise it will become twisted and pull

the lamp out of alignment.

Thread the lower end of the cable (18) through the large

aperture in the plastic cover (4) and shorten it so that it

hangs in a loose arc when the chandelier is suspended.

Thread the metal washer (22) and the retaining sleeve (23)

onto the cable. Attach the terminal (24) to the ends of

the cable, using the protective caps supplied. Push the

chandelier up along the rod (10) on the plastic cover until

it becomes possible to replace the retaining screw (3).

Secure the screw with the nut (2) @

Screw the low-voltage bulbs into the holder rings (25)

and push the connecting wires (26) firmly into the

contact sleeves (27) on the bulbs. Ensure that the wires

are securely in position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ingo Maurer Birdie in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 14.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ingo Maurer Birdie Manual

Product: