768077

Inglesina Sketch Manual

17
Zoom out
Zoom in
Previous page
1/96
Next page
17
EN
Do not bleach
Do not tumble dry
Dry at in shade
Do not iron
Do not dry clean
Do not spin-dry
• Dry the textile lining completely before using or storing it.
LIST OF COMPONENTS
g. 1
A Hood
B Handrail
C Storage basket
OPENING THE STROLLER
g. 2 To open the stroller, release the hook (P1) that
ensures its folding and unbutton the 2 press studs (P2) that
hold the backrest on the structure.
g. 3 Holding the handle rmly on both sides, lift the
stroller until the correct opening click is heard.
REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLY
In case of need, the front wheel assembly (D) can be easily
removed.
g. 4 To remove it, pull it out from the front support
while holding down the lever (D1).
g. 5 To reinstall it, simply position it and push it until it
clicks into place.
g. 6 Caution: make sure that the wheels are properly
attached before use.
REMOVING/ATTACHING THE REAR WHEELS
Should it be necessary, the rear wheels (E) can easily be
removed.
g. 7 To remove them, pull them out from the rear
support while holding down the button (E1).
g. 8 To reinstall them, simply position them and push
them until they click into place.
g. 9 Caution: make sure that the wheels are properly
attached before use.
REAR WHEELS BRAKE
g. 10 To operate the brake, use the rear central lever (P3).
Always engage the brake during stops.
HANDRAIL
g. 11 The handrail (B) can be open on one side or fully
removed; to open it, press the button (B1) and remove it
from its housing; to remove it, repeat the procedure on the
other side.
ADJUSTING THE BACKREST
g. 12 To lower the backrest, release the rear strap by
pressing the button (P4) on the central device (P5).
g. 13 To lift the backrest, press the button (P4) on the
central device (P5) and simultaneously pull the rear ring (P6).
SAFETY BELTS
g. 14 Ensure that the safety belts are inserted in the
eyelets at the height of the shoulders or immediately above.
If the position is not correct, remove the belts from the rst
pair of eyelets and reinsert them in the second one; always
use eyelets at the same height.
g. 15 To move the back straps from one pair of slots to
the other, open the back zip (P7) on the backrest and remove
the back straps through the corresponding holes, on the
internal rigid reinforcement (P8).
g. 16 Then insert the back straps into the second pair of
slots on the backrest and pass through the corresponding
holes on the internal rigid reinforcement (P8).
g. 17 Make sure that the back strap is properly inserted
in the ends of the waist one (P9).
g. 18 Fasten the ends of the waist belt to the central
buckle (P10).
g. 19 Always use the crotch strap (P11) in combination
with the waist strap, making sure that they are all well
adjusted around the baby.
Caution! Failure to comply with this precaution can cause
the baby to fall or slide out, with serious injury risks.
Caution: adapt the height and the length of the harness
according to the baby’s growth.
HOOD
g. 20 To adjust the hood, simply accompany it to the
desired position.
g. 21 The hood features a fabric insert that extends the
degree of cover, improving protection from the sun.
HOOD LINING MAINTENANCE
The hood lining can be removed to allow for its correct
maintenance.
g. 22 To remove it, unbutton both rear press studs (A1).
g. 23 Unbutton the 2 press studs (A2) that x the hood to
the structure of the stroller and detach the side velcro (A3).
g. 24 Open the internal zip (A4) and free the lining from
the xed rear rib (A5).
g. 25 Use a screwdriver (or similar tool, not included)
to operate the lever (A6) placed on the hood joint and
simultaneously remove the front rib (A7) from its housing.
g. 26 Now remove the entire hood lining.
ADJUSTING THE FOOTREST
g. 27 To lower the footrest (E), use both side buttons (E1)
and push it down simultaneously.
g. 28 To lift the footrest, simply pull it upwards and it
shall automatically lock into position.
CLOSING THE STROLLER
g. 29 To fold the stroller, use the lever (P13) and
simultaneously press the release button (P14) until the
INSTRUCTIONS
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inglesina Sketch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inglesina Sketch in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info