Manual Inglesina Quid 2 Vespa (page 19 of 124) (English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish)

769057

Zoom out

Zoom in

1/124

not approved by L’Inglesina Baby S.p.A.

WHAT TO DO IF YOU REQUIRE ASSISTANCE

• If you require assistance for your product, immediately

contact the Inglesina Retailer that sold it to you, with the

“Serial Number” relative to said object ready on hand.

• It is the Retailer’s duty to contact Inglesina to assess the

best suited intervention case by case and then provide the

subsequent indications.

• The Inglesina Customer Care Service can provide any

information, following written request by lling out the

form provided on the website: inglesina.com - Warranty and

Assistance section.

HINTS FOR CLEANING AND MAINTAINING THE PRODUCT

• This product requires regular maintenance by the user.

• Never force any mechanisms or moving parts; in case of

doubt, check the instruction rst.

• Do not store the product if it is still wet and do not leave it

in humid environments since mildew may form.

• Store the product in a dry place.

• Protect the product against weather agents, water, rain

or snow; moreover, continuous and prolonged exposure to

sunlight can cause changes in the colour of many materials.

• Should the product be used on the beach, carefully clean

and dry it afterwards in order to remove sand and salt as they

may cause rusting.

• Clean the plastic and metal parts with a damp cloth or with

a mild detergent; do not use solvents, ammonia or benzine.

• Carefully dry metal parts after any contact with water to

prevent the formation of rust.

• Keep all moving parts clean and, if necessary, lubricate

them with light oil.

HINTS FOR CLEANING THE TEXTILE LINING

• Seat cover and harness are surface wash only. Clean with a

damp cloth and mild soap; do not use solvents, ammonia or

bleach.

Do not use abrasive cleaners or scrubbing pads.

• Follow the lining washing instructions on the labels.

Do not bleach

Do not tumble dry

Dry at in shade

Do not iron

Do not dry clean

Do not spin-dry

• Dry the textile lining completely before using or storing it.

LIST OF COMPONENTS

g. 1

A Hood

B Handrail

C Storage basket

D Rain cover (if available)

“SELF STANDING” SUPPORT

g. 2 In order to allow the stroller to remain upright on

its own, pull out the support (S1) and place it in its housing.

STROLLER OPENING

g. 3 To open the stroller, use both levers (P1) and

simultaneously, holding the handle rmly, lift the stroller

until the correct opening click is heard.

Warning: before use, make sure that the stroller is

correctly opened by checking that the red area is no

longer visible from both sides.

Caution: use the levers (P1) exclusively while opening

and closing the stroller. Be careful not to operate them

accidentally during the normal use of the stroller.

REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLY

In case of need, the front wheel assembly (D) can be easily

removed.

g. 4 To remove it, pull it out from the front support

while holding down the lever (D1).

g. 5 To reinstall it, simply position it and push it until it

clicks into place.

g. 6 Caution: make sure that the wheels are properly

attached before use.

REMOVING/ATTACHING THE REAR WHEELS

Should it be necessary, the rear wheels (E) can easily be

removed.

g. 7 Use a screwdriver (or similar tool, not included) to

operate the lever (E1) and simultaneously pull them out from

the rear support.

g. 8 To reinstall them, simply position them and push

them until they click into place.

g. 9 Caution: make sure that the wheels are properly

attached before use.

REAR WHEELS BRAKE

g. 10 To operate the brake, use the rear central lever (P3).

Always engage the brake during stops.

BLOCKING/UNBLOCKING THE FRONT WHEELS

g. 11 The stroller features swivelling wheels that can be

blocked or unblocked simply by operating the lever (P4) by

the front wheel assemblies.

HANDRAIL

g. 12 The bumper bar (B) can be opened on one side

or completely removed; to open it, pull the lever (B1) and

remove it from its housing.

To remove it, repeat the operation on the other side as well.

Warning: never attach the bumper bar in the direction

opposite the one shown.

ADJUSTING THE BACKREST

g. 13 To lower the backrest, release the rear strap by

pressing the button (P5) on the central device (P6).

g. 14 To lift the backrest, press the button (P5) on the

control device (P6) and simultaneously pull the rear ring (P7).

SAFETY BELTS

g. 15 If the height of the back straps must be changed,

remove the shoulder straps (P8) by detaching the velcro that

secures them on the belts (P13), then pull them out of the

loops on the backrest (P9). Use both back straps always at the

same height.

INSTRUCTIONS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inglesina Quid 2 Vespa in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inglesina Quid 2 Vespa Manual

Product: