768097
16
Zoom out
Zoom in
Previous page
1/116
Next page
16
EN
LIST OF COMPONENTS
g. 1
A Reclined cradle cover + curved seat tube
B Adapter
C Base of structure
D Backrest structure
E Toy bar + 2 xing clips
F Music device (if present)
STRUCTURE ASSEMBLING
g. 2 To assemble the reclined cradle frame, connect
the backrest structure (D) with the base (C) until both parts
are heard to click into place.
RECLINED CRADLE COVER FITTING
g. 3 Using the adjustment device (D1), bring the
backrest (D) to its most vertical position.
g. 4 Line the structure of the backrest (D) with the
reclined cradle cover (A), attaching it correctly.
g. 5 Insert the curved seat tube (A1) in the dedicated
housings (C1) on the base of the structure (C) and complete
the connection, holding down both pins (D2).
g. 6 CAUTION! Check that the tube is connected
correctly on both sides by pulling it outwards.
g. 7 Complete the lining by engaging all the rear
press studs (A2).
RECLINED CRADLE COVER REMOVAL AND MAINTENANCE
It is advisable to remove the reclined cradle cover periodically
for correct maintenance.
g. 8 Undo all the rear press studs (A2) and remove
the reclined cradle cover from the backrest structure (D).
g. 9 Holding down both pins (D2), remove the
curved seat tube (A1) from the housings on the base (C1).
g. 10 Make sure to remove the curved seat tube (A1),
separating it from the fabric before washing.
ADAPTER
g. 11 Once the adapter (B) has been positioned on
the reclined cradle, pass the crotch strap complete with
protection (A3) through the dedicated slot (B1).
g. 12 Then pass the lower back straps (A4) rst
through the slots on the adapter (B2) and then through the
slots on the crotch strap protection (A6).
SAFETY BELTS
WARNING! Always use the restraint system.
g. 13 To engage the harness, insert the lower back
sections (A4) in the central buckle (A5); always use the crotch
strap in combination with the waist strap, adjusting them
correctly.
CAUTION! Failure to comply with this precaution can
cause the baby to fall or slide out, with serious injury
risks.
BACKREST ADJUSTMENT
g. 14 The backrest can be adjusted to 3 positions;
use the central device (D1) and accompany it to the desired
position.
RECLINED CRADLE FUNCTION
g. 15 The structure of the chair permits rocking. To
x it, simply release the rear lever (D3), bringing it to «stop»
position.
CARRYING STRAPS
g. 16 The reclined cradle features side carrying straps
(A7). When not in use, the straps must be placed in the
dedicated housings (A8) on the back of the cover.
TOY BAR
g. 17 Prepare the toy bar (E), engaging both clips
(E1) with the reclined cradle backrest tube, on the housings
indicated on the cover (A8).
g. 18 Then insert the toy bar (E) in both the slots in the
clips (E2).
CAUTION! Never use the toy bar to carry the reclined
cradle.
g. 19 The toys can be detached and repositioned
easily (also for the purposes of correct maintenance) by
removing them from their housings on the bar.
MUSIC DEVICE (if present)
g. 20 The music device (F) features a xing clip (F1)
and hooks onto the dedicated pocket (F2) under the reclined
cradle.
FUNCTIONS AND USE OF THE MUSIC DEVICE
The music device is battery operated, using 3 AA-type 1.5-
volt batteries (not included).
g. 21 To insert the batteries, open the cover (F3)
on the device, removing the screw (F4) using a cross-head
screwdriver (not included).
g. 22 Observe the polarity indicated when inserting
the batteries.
g. 23 Close the cover again (F3) using the dedicated
screw (F4).
g. 24 To activate the device, adjust the volume and
switch it o, use the switch (F5).
g. 25 3 dierent melodies are available; to select
them, use the button (F6).
INSTRUCTIONS
T
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inglesina Lounge at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inglesina Lounge in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 1,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info