215737
12
Zoom out
Zoom in
Previous page
1/39
Next page
11
Shutting down the projector
Power Save
The projector also has a Power Save feature that automatically turns the lamp off
after no active sources are detected and no user interaction with the projector is
performed for 20 minutes. By default, this feature is on. See page 24.
Sleep Timer
The projector also has a sleep timer feature that automatically turns the projector
off after 4 hours. See page 24.
Turning off the projector
Press the Power button on the remote to turn the projector off. The lamp turns
off and the Power light on the Status Indicator Panel blinks amber for one (1)
minute while the fans continue to run to cool the lamp. While the light is blinking,
the projector does not accept any keypad and remote control input. When the
lamp has cooled, the Power light is solid amber.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does
not, troubleshoot the setup.
The Status Indicator Panel on top of the projector indicates the state of the pro-
jector and can help you troubleshoot.
The following tables show common problems. In some cases, more than one possi-
ble solution is provided. Try the solutions in the order they are presented. When
the problem is solved, you can skip the additional solutions.
Table 2: Status indicator light behavior and meaning
Status Indicator Meaning
Power, green Powering up or powered up
Solid: the lamp is on and an image is dis-
played.
Blinking: the projector is powering up.
Power, amber Powering down or powered down
Solid: the lamp is off and the projector is
in standby.
Blinking: the projector is powering down
and the fans are running to cool the lamp.
Temperature The projector is too hot. Make sure the
vents aren’t blocked. Turn off the projec-
tor and wait one minute, then turn the
projector on again. Contact Technical
Support if the problem persists
.
Lamp Turn off the projector and wait one
minute, then turn the projector on again.
If the lamp light turns on again, replace the
lamp and reset the lamp timer.
Service Turn off the projector and wait one
minute, then turn the projector on again.
If the service lamp turns on again, service
is required. Visit www.infocus.com/service
to contact Service.
K1 RG.fm Page 11 Thursday, November 8, 2007 9:08 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Infocus x10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Infocus x10 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Infocus x10

Infocus x10 User Manual - German - 29 pages

Infocus x10 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info