215737
5
Zoom out
Zoom in
Previous page
1/39
Next page
4
Connector Panel
Remove the cable cover, if attached, to access the connector panel. Replace the
cover after the projector is installed, if desired.
The projector provides the following connection options:
M1-DA/DVI (Digital Visual Interface)
HDMI™ (High Definition Multimedia Interface)
Component (RCA)
•S-video
Composite video (RCA)
See “Video connectors” on page 7 for details.
The projector also provides the following connectors:
RS-232 for serial control
Two 12 volt DC outputs (see below)
IR input for connection to Niles/Xantech compatible IR repeater systems
12 volt DC outputs
The 3.5mm mini-jack triggers provide a 12 volt, 0.25 amp DC output. They provide
a constant output while the projector is on. They are typically used for screen con-
trol. For example, if you connect your projection screen to the vertical screen trig-
ger with the cable that came with your screen, when you turn on the projector the
screen will move down; when you turn the projector off, the screen will return to
the storage position. The horizontal screen trigger output can be used to control
curtains or an adjustable aspect ratio screen.
M1-DA/
S-video
component
composite
HDMI
RS-232
DVI
RCA
IR input
RCA
12 volt DC output
+12v
ground
3.5mm plug
to, for example, screen relay (see screen manufacturer
for details)
K1 RG.fm Page 4 Thursday, November 8, 2007 9:08 AM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Infocus x10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Infocus x10 in the language / languages: English as an attachment in your email.

The manual is 5,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Infocus x10

Infocus x10 User Manual - German - 29 pages

Infocus x10 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info