537535
40
Zoom out
Zoom in
Previous page
1/53
Next page
Preface
33
LED Error Messages
ERROR CODE MESSAGES POWER LED LAMP / READY LED TEMP LED
Powered on Solid Green Solid Red OFF
Powering up Solid Green Flashing Red OFF
Cooling down Solid Green Flashing Red OFF
Over Temperature OFF OFF Solid Red
Thermal Break Sensor error Flashes Green 7x OFF OFF
Lamp error/Color wheel control error Flashes Green 5x OFF OFF
Burner Fan error Flashes Green 6x Flashes Green 1x OFF
Lamp Fan error Flashes Green 6x Flashes Green 2x OFF
Power Fan error Flashes Green 6x Flashes Green 3x OFF
DMD Fan error Flashes Green 6x Flashes Green 4x OFF
Case Open Flashes Green 7x OFF OFF
DMD error/Ignition failed Flashes Green 8x OFF OFF
Color wheel error Flashes Green 9x OFF OFF
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re-
starting the projector. If the POWER or LAMP LEDs are still blinking or the TEMP LED is lit, contact
InFocus Technical Support at www.infocus.com/support
.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
3. Many laptops do not automatically turn on their external video port when a projector is
connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto Image button on the remote control or the Re-sync button on the keypad.
3. Ensure the projector-to-screen distance is within the 10-meter (33-feet) specified range.
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone button on the remote control or projector to correct the problem.
Problem: The image is reversed
Check the Projection setting on the Setup >> Basic menu of the OSD.
Problem: The image is streaked
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN8601 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN8601 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of InFocus IN8601

InFocus IN8601 User Manual - German - 53 pages

InFocus IN8601 User Manual - Dutch - 53 pages

InFocus IN8601 User Manual - French - 53 pages

InFocus IN8601 User Manual - Italian - 53 pages

InFocus IN8601 User Manual - Portuguese - 53 pages

InFocus IN8601 User Manual - Swedish - 53 pages

InFocus IN8601 User Manual - Spanish - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info