549906
21
Zoom out
Zoom in
Previous page
1/104
Next page
21
ENGLISH
10.2 Filter unit
To keep the interior venting properly, keep a spare and replace the lter unit periodically,
although frequent replacement is not needed for this product.
To purchase a spare, contact your dealer and tell the following type number.
Optional lter part number: SP-FILTER-01
The following walks you through the steps to replace the lter unit.
1. Make sure that the projector is unplugged and cooled
down.
2. Use a vacuum cleaner on and around the lter cover.
3. Pick and pull up the lter cover knobs to take it off.
4. Pinch and pull out the lter unit knobs to take it off.
5. Use a vacuum cleaner on and around the intake vents of
the projector.
6. Set the new lter unit into the place.
7. Put the lter cover back into the place.
8.
Reset the FILTER TIME value.
(1) Turn the projector on.
(2) To display the EASY MENU, press the MENU
button (on the control panel or the remote control).
On the ADVANCED MENU, select the “EASY
MENU” using the ▲/▼ cursor buttons in the left
column, then press the ► cursor button.
(3) To display the FILTER TIME dialog, select the
FILTER TIME” using the ▲/▼ cursor buttons, then
press the ► cursor button.
(4) Use the ► cursor button according to the dialog,
Selecting “OK” resets the FILTER TIME value.
NOTE
* The value shown on the EASY MENU as the FILTER TIME is the amount of usage
which has occurred since the last time the FILTER TIME was reset. Refer to the value
for proper maintenance.
* You can use the message function, which is set up by the item FILTER TIME of the
OPTION menu, to notify you when to replace the lamp.
WARNING
● Before checking or replacing the filter unit, turn off, unplug, and cool down the
projector.
● To keep ventilation of the inside normal, replace the filter unit periodically.
● Use only the manufacturer specified type of the filter unit.
NOTICE
● Be sure to reset the FILTER TIME after you have replaced the filter unit.
Filter cover
Filter cover
knob
Filter unit
knob
Intake vents
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN5542 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN5542 in the language / languages: English as an attachment in your email.

The manual is 11,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of InFocus IN5542

InFocus IN5542 User Manual - English - 52 pages

InFocus IN5542 User Manual - English - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info