549925
54
Zoom out
Zoom in
Previous page
1/68
Next page
47
LED Error Messages
Error Code Messages
PWR LED
TEMP LED
READY LED
Overheating
Off
Solid Red
Off
Thermal break
Flashing Red 4x
Off
Off
Lamp strike fail
Flashing Red 5x
Off
Flashing Red 1x
Lamp Short circuit in output detected
Flashing Red 5x
Off
Flashing Red 2x
Lamp End of lamp life detected
Flashing Red 5x
Off
Flashing Red 3x
Lamp did not ignite
Flashing Red 5x
Off
Flashing Red 4x
Fan 1 error
Flashing Red 6x
Off
Flashing Red 1x
Fan 2 error
Flashing Red 6x
Off
Flashing Red 2x
Fan 3 error
Flashing Red 6x
Off
Flashing Red 3x
Fan 4 error
Flashing Red 6x
Off
Flashing Red 4x
Case open
Flashing Red 7x
Off
Off
DMD fail
Flashing Red 8x
Off
Off
Color wheel fail
Flashing Red 9x
Off
Off
Ballast Communication fail
Flashing Red 5x
Off
Flashing Red 10x
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before
restarting the projector. If the PWR or READY LED is still blinking or the TEMP LED is lit, contact
InFocus Technical Support at www.infocus.com/support.
Image Problems
Problem: No image appears on the screen
1. Verify the settings on your notebook or desktop PC.
2. Turn off all equipment and power up again in the correct order.
3. Many laptops do not automatically turn on their external video port when a projector is
connected. Usually a key combination like FN + F8 or CRT/LCD key turns the external
display on and off. Locate a function key labeled CRT/LCD or function key with a monitor
symbol. Press FN and the labeled function key simultaneously.
Problem: The image is blurred
1. Adjust the Focus on the projector.
2. Press the Auto button on the remote control.
3. Ensure the projector-to-screen distance is within the projection range. (Within 7m/23' for
the standard lens; within 20m/66' for the long lens and within 3m/10' for the short lens).
4. Check that the projector lens is clean.
Problem: The image is wider at the top or bottom (trapezoid effect)
1. Position the projector so it is as perpendicular to the screen as possible.
2. Use the Keystone buttons on the remote control or projector to correct the problem.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus In5312a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus In5312a in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info