549925
22
Zoom out
Zoom in
Previous page
1/68
Next page
15
Adjusting Projected Image Position Using Shift
The Shift feature provides a lens shift function that can be used to adjust the position of the projected
image either horizontally or vertically within the range detailed below.
Shift is a unique system that provides lens shift while maintaining a much higher ANSI contrast ratio
than traditional lens shift systems.
Adjusting the vertical image position
The vertical image height can be adjusted between 10% and -70% offset for IN5316HDa (1080P); 0%
and -60% offset for IN5312a (XGA); (offset =(O/H) x100%, O: distance from bottom of image to
center of lens). Note that the maximum vertical image height adjustment can be limited by the
horizontal image position. Offset is the distance between the lens center line and the bottom of the
image. The offset is positive if the lens center line is below the bottom of the image. The offset is
negative if the lens center line is above the bottom of the image. For example it is not possible to
achieve the maximum vertical image position height detailed above if the horizontal image position is
at maximum. Please consult the Shift Range diagram below for further clarification.
For IN5316HDa (1080P)
Screen Height(H)
10%H
-70% offset
-50% offset
10% offset
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus In5312a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus In5312a in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info