538191
16
Zoom out
Zoom in
Previous page
1/54
Next page
12
Replacing the lamp
Lamps have a nite product life. Using the lamp for long periods of time can cause
the pictures to become dim and the color tone to become poor. Each lamp has a
different lifetime, and some may burst or burn out soon after you start using them.
Purchasing a replacement lamp ahead of time is recommended. To purchase
a new lamp, contact with your dealer and ask for the following the lamp part
number.
Part number : SP-LAMP-064
1.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
2.
Purchase a new lamp. If the projector is mounted
on a ceiling, or if the lamp has broken, you can
ask the dealer to replace the lamp.
If you replace the lamp yourself, follow these
procedures:
3.
Loosen the screw (marked by an arrow) on the
lamp door and then slide and lift the lamp door to
the side to remove it.
4.
Loosen the 3 screws (marked by arrows) on the
lamp, and slowly remove the lamp using the
handles. Never loosen any other screws.
5.
Insert the new lamp, and retighten the 3 screws on
the lamp rmly (which were previously loosened)
to lock it in place.
6.
Slide the lamp door back in place. Then rmly
fasten the screw on the lamp door.
7.
Turn the projector on and reset the lamp time
using the RESET LAMP HOURS item in the
SERVICE menu.
(1) Press the MENU button to display a menu.
(2) Point at the ADVANCED MENU in the menu using the
V / Λ button, then press the > button.
(3) Point at the OPTION in the left column of the menu
using the V / Λ button, then press the > button.
(4) Point at the SERVICE in the menu using the V / Λ button,
then press the > button.
(5) Point at the RESET LAMP HOURS using the V / Λ button,
then press the > button. A dialog will appear.
(6)
Press the
>
button to select YES on the dialog. This resets the lamp time.
CAUTION ►Do not touch anywhere inside of area where the lamp was
removed from the projector.
Lamp door
4
3
6
Handles
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN5124c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN5124c in the language / languages: All languages as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info