538191
12
Zoom out
Zoom in
Previous page
1/54
Next page
8
Connecting power supply
1.
Put the connector of the power cord into the
AC IN (AC inlet) of the projector.
2.
Firmly plug the power cord’s plug into an
electrical outlet. In a few seconds after the
power has been connected, the POWER
indicator will light up in steady orange.
Please remember that when the AC POWER ON
function is activated, connecting power will cause the
projector turn on.
Turning on the power
1.
Make sure that the power cord is rmly and
correctly connected to the projector and the
outlet.
2.
Make sure that the POWER indicator is
steady orange. Then remove the lens
cover.
3.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking green.
When the power is completely on, the
indicator will stop blinking and become
steady green.
STANDBY/ON SOURCE MENU
SECURITY
LAMP
TEMP
POWER
WARNING ►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in re and/or electrical shock.
Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one.
Only plug the power cord into an outlet with matching voltage. The power
outlet should be close to the projector and easily accessible. Remove the
power cord for complete removal of power.
Never modify the power cord.
WARNING ►A strong light is emitted when the projectors power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projectors openings.
NOTE • Power on the projector prior to turning on connected devices.
• The projector has a AC POWER ON function, which can make the projector
turn on automatically. For more information, please see the User’s Manual.
AC IN
Power
cord
STANDBY/ON button
POWER indicator
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN5124c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN5124c in the language / languages: All languages as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info