476237
85
Zoom out
Zoom in
Previous page
1/97
Next page
83
Maintenance
Lamp warning
Replacing the lamp (continued)
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
The projector uses a high-pressure mercury glass lamp. The lamp
can break with a loud bang, or burn out, if jolted or scratched, handled when hot, or
worn over time. Note that each lamp has a different lifetime, and some may burst or
burn out soon after you start using them. In addition, if the bulb bursts, it is possible
for shards of glass to y into the lamp housing, and for gas containing mercury and
dust containing ne particles of glass to escape from the projectors vent holes.
About disposal of a lamp: This product contains a mercury lamp; do not put
it in the trash. Dispose of it in accordance with environmental laws.
For lamp recycling, go to www.lamprecycle.org (in the US).
For product disposal, consult your local government agency
or www.eiae.org (in the US) or www.epsc.ca (in Canada).
For more information, call your dealer.
WARNING
If the lamp should break, unplug the power cord from the outlet, and make
sure to request a replacement lamp from your local dealer. Note that shards of
glass could damage the projectors internals, or cause injury during handling, so
please do not try to clean the projector or replace the lamp yourself.
If the lamp should break, ventilate the room well, and make sure not to inhale the gas
or ne particles that come out from the projector's vent holes, and not to get them into
your eyes or mouth.
Before replacing the lamp, turn the projector off and unplug the power cord,
then wait at least 45 minutes for the lamp to cool sufciently.
Handling the lamp
when hot can cause burns, as well as damaging the lamp.
• Never unscrew except the appointed (marked by an arrow) screws.
Do not open the lamp cover when the projector is suspended from a ceiling.
This is dangerous, since if the lamp’s bulb has broken, the shards will fall out
when the cover is opened. In addition, working in high places is dangerous, so
ask your local dealer to have the lamp replaced even if the bulb is not broken.
Do not use the projector with the lamp cover removed. When replacing the
lamp, make sure that the screws are screwed in firmly. Loose screws could
result in damage or injury.
Use only the lamp of the specied type. Use of a lamp that does not meet the
lamp specications for this model could cause a re, damage or shorten the life of
this product.
If the lamp breaks soon after the rst time it is used, it is possible that there
are electrical problems with the projector. If this happens, consult your local
dealer or a service representative.
Handle with care: jolting or scratching could cause the lamp bulb to burst
during use.
Using the lamp for long periods of time can cause it to darken, not to light
up or to burst. When the images appear dark, or when the color tone is poor,
please replace the lamp as soon as possible. Do not use old (used) lamps; this
can cause breakage.
Disconnect
the plug
from the
power
outlet
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN5122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN5122 in the language / languages: English as an attachment in your email.

The manual is 5,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of InFocus IN5122

InFocus IN5122 User Manual - German - 97 pages

InFocus IN5122 User Manual - Dutch - 97 pages

InFocus IN5122 User Manual - French - 97 pages

InFocus IN5122 User Manual - Italian - 97 pages

InFocus IN5122 User Manual - Portuguese - 97 pages

InFocus IN5122 User Manual - Swedish - 97 pages

InFocus IN5122 User Manual - Spanish - 97 pages

InFocus IN5122 Quick start guide - All languages - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info