538054
30
Zoom out
Zoom in
Previous page
1/40
Next page
29
Timer
Auto Off Time: aut
omatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received before
the projector powers down, the image will be displayed.
High Altitude Setting
High Altitude Setting: W
e recommend you turn on the High Altitude
Mode when your environment is between 5000' (1500m) and 10,000'
(3000m) above sea level.
Network
Allow you to configure the network settings.
DHCP: Abbr
eviation for Dynamic Host Configuration Protocol. This
protocol automatically assigns IP Address to networked devices.
When the “DHCP” is set to “On”, it takes some time to obtain IP address
from DHCP server.
When the "DHCP" is set to "Off", that means user will set IP address by
manually.
IP Address: Numerical address to identify networked computers. This func-
tion can only be used when DHCP is set to Off.
The IP Address is the number that identifies this projector on the
netw
ork. You cannot have two devices with the same IP Address on the
same network.
The IP Address “0.0.0.0” is prohibited.
Subnet Mask: A
numeric value to define the number of bits used for a net-
work address of a divided network (or subnet) in an IP Address. This function
can only be used when DHCP is set to Off.
The Subnet Mask “0.0.0.0” is prohibited.
Default Gateway:
A server (or router) to communicate across networks
(subnets) that are divided by a Subnet Mask. This function can only be used
when DHCP is set to Off.
DNS:
Setup DNS server address when DHCP is disabled.
Mac Address: Abbreviation for Media Access Control Address. Mac
Address is a unique ID number assigned to each network adapter.
Apply:
Save and execute the wired network settings.
Restart Network...: Restar
t network settings.
Status/Service:
Source Info: a read-only display of current source settings.
Projector Info:
a read-only display of current projector settings.
Reset Lamp Hours...:
resets the lamp hours used counter in the Projector
Info menu to zero. Do this only after changing the lamp.
Factory Reset...: r
estores all settings to their factory default settings.
Service Code...: onl
y used by authorized service personnel.
Network Menu
Restart Network...
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN2126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN2126 in the language / languages: English as an attachment in your email.

The manual is 9,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of InFocus IN2126

InFocus IN2126 Additional guide - English - 2 pages

InFocus IN2126 User Manual - German - 40 pages

InFocus IN2126 User Manual - Dutch - 40 pages

InFocus IN2126 User Manual - French - 40 pages

InFocus IN2126 User Manual - Italian - 40 pages

InFocus IN2126 User Manual - Portuguese - 40 pages

InFocus IN2126 User Manual - Swedish - 40 pages

InFocus IN2126 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info