537844
7
Zoom out
Zoom in
Previous page
1/8
Next page
If there is no picture or the picture is blank
If the power light is off,
make sure the power cord is connected and plugged
into a live electrical outlet, and then press the
POWER
button on the keypad or
remote.
Check video source and cables.
Make sure the video source (computer, DVD
player, VCR, etc.) is turned on and cables are securely connected between the
source and the projector.
Make sure your computer's video port is enabled.
Press the key combination
that activates your laptop's external video port (see step
4
). If there is still no
image, restart your laptop.
Press the SOURCE button
on the projector or remote and use
and to
highlight the desired source. Then press the on the keypad (or the
SELECT
button on the remote) to activate the source.
Press the Auto Image button.
If "Signal out of range" is shown, or the picture looks bad
Press the Auto Image button.
If that doesn't help (and the source is a computer),
reduce your computer's display resolution or vertical refresh rate.
If "Replace lamp" is shown
Turn the projector off and wait at least one minute, then turn it on again. If
the replace lamp message is displayed again, the lamp needs to be replaced.
For lamp replacement instructions,
see the Reference Guide, which can be
downloaded at
www.infocus.com/support
Only InFocus genuine lamps are tested for use in this projector.
If the projector is overheating
Turn the projector off and remove anything that may be blocking the air vents
on its sides.
Leave the projector off for at least one minute to let it cool before
turning it on again.
Important:
Continuous operation while overheating may
reduce the lifetime of the lamp and/or projector.
TROUBLESHOOTING
Warning:
In the unlikely event of a lamp rupture, particles may be ejected from
the projector. Keep out of the area under and around the projector while the
projector is in use. See the safety instructions booklet for more details.
TEMP/LAMP
POWER
More troubleshooting options are in the Reference Guide
Download it at www.infocus.com/support
QS_IN112_114_116.indb 7 2011/5/30 上午 09:43:32
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN112A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN112A in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of InFocus IN112A

InFocus IN112A User Manual - German - 35 pages

InFocus IN112A User Manual - Dutch - 36 pages

InFocus IN112A User Manual - Italian - 36 pages

InFocus IN112A User Manual - Portuguese - 36 pages

InFocus IN112A User Manual - Swedish - 36 pages

InFocus IN112A User Manual - Spanish - 36 pages

InFocus IN112A User Manual - Spanish - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info