667076
20
Zoom out
Zoom in
Previous page
1/36
Next page
19
Using the remote control
The remote uses two (2) AAA batteries (not provided). They are easily installed by
removing the cover from the remote’s back, aligning the + and - ends of the
batteries, sliding them into place, and then replacing the cover.
Caution:
When replacing the remote batteries, be aware that using batteries other
than AAA batteries may risk severe damage to the remote. When disposing
of the batteries, be sure to do so in an enviromentally proper manner.
If the remote control gets wet, wipe it dry immediately.
Avoid excessive heat and humidity.
Ensure the batteries' polarity (+/-) is aligned correctly.
Do not mix new and old batteries together, or mix different types of batteries
together.
Replace the batteries as soon as they run out.
Remove batteries from the remote control when storing or not in use for a
prolonged period.
To operate, point the remote at the front of the projector (not at the computer).
The range of optimum operation is about 15 feet (4.5m).
Press the remote’s Power button to turn the projector on and off (see page 8 for
shutdown info).
Press the remote’s Menu button to open the projector’s menu system. Use the
arrow buttons to navigate, and the Select button to select features and adjust
values in the menus. See page 23 for more info on the menus.
The remote also has:
Volume buttons adjust the sound.
Custom button that can be assigned to a special function, like Blank Screen or
Freeze (see
page 26).
Source button brings up a menu of all possible sources allowing the user to
switch the active source.
Blank button to blank the screen.
Presets button to select stored settings (see page 24).
Mute button to silence the audio.
Auto Image button to resynch the projector to the source.
Resize button to switch among aspect ratios (see page 24).
Help button to get help with connecting sources and improving the picture.
ESC to go back to previous OSD menu or to return to home screen when
using LightCast source.
PC button to cycle through the computer sources.
Video button to cycle through the video sources.
Keystone buttons adjust the squareness of the image
Magnify buttons magnify and reduce the projected picture size.
Freeze button to pause the projected image.
Overscan button remove noise around the video image.
AV Mute button blanks the projected image and mutes audio.
Lightcast and the remote
When using Lightcast, the ESC button acts as the Home key and navigation keys
are used for navigating LightCast.
Troubleshooting the remote
Make sure the batteries are installed in the proper orientation and are not
dead.
Make sure you’re pointing the remote at the projector or the screen, not the
computer, and are within the remote range of 15 feet (4.5m). For best results,
point the remote at the projector.
navigation
buttons
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Infocus IN1116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Infocus IN1116 in the language / languages: English as an attachment in your email.

The manual is 8,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info