476276
11
Zoom out
Zoom in
Previous page
1/36
Next page
10
De projector uitschakelen
De projector geeft automatisch een blanco scherm weer als gedurende 30 minuten
geen actief signaal is gedetecteerd. Dit blanco scherm helpt de levensduur van de
projector te verlengen. Het beeld keert terug als een actief signaal is gedetecteerd of
als een toets op afstandsbediening of projectorpaneel wordt ingedrukt.
Auto tijd uit
De projector kan automatisch worden uitgeschakeld als gedurende 30 minuten geen
actieve signalen worden gedetecteerd en geen interactie met de projector wordt
uitgevoerd. Deze functie is standaard uit. Zie pagina 29 om de tijdsduur te
veranderen.
De projector uitschakelen
U schakelt de projector uit door op de Power-toets op afstandsbediening of
projector te drukken. De lamp wordt uitgeschakeld en 1 minuut lang knippert de led
geel terwijl de ventilatoren de lamp blijven afkoelen. Als de lamp is afgekoeld,
branden de led’s geel en stoppen de ventilatoren. Trek de stroomkabel los om de
projector helemaal uit te schakelen.
Problemen oplossen
Als het beeld correct op het scherm verschijnt, kunt u dit hoofdstuk overslaan.
Indien niet, onderzoekt u uw opstelling.
Het paneel met statusindicatoren
bovenop de projector geeft de status van de
projector aan, wat u kan helpen bij het oplossen van problemen.
Tabel 3: Lichtsignalen en betekenis van statusindicatoren
Pictogrammen paneel met
statusindicatoren Betekenis
Power, brandt geel
Power, knippert groen
Power, brandt groen
Power, knippert geel
De projector is aangesloten op stopcontact.
Er is op de power-toets gedrukt en de s
oftware
wordt gestart.
De projector is ingeschakeld en opgest
art.
Er is op de power-toets gedrukt om
de projector
uit te schakelen en de ventilatoren zijn
geactiveerd om de projector af te koelen.
Thermometer
De projector is te heet. Zorg dat de
ventilatieopeningen niet geblokkeerd zijn (zie
pagina 16). Schakel de projector uit en wacht een
minuut, en schakel de projector weer in. Ga naar
ww
w.
infocus.com/support voor contact met de
klantenservice.
Lamp Schakel de projector uit en wacht een minuut, en
schakel de projector weer in. Als het lichtje van
de lamp weer aan gaat, vervang dan de lamp en
stel de lamptimer opnieuw in.
Sleutel/reparatie
Schakel de projector uit en wacht een minuut, en
schakel de projector weer in. Als de
reparatielamp weer aan gaat, is reparatie vereist.
Ga naar www.infocus.com/support voor contact
met de onderhoudsafdeling.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for InFocus IN1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of InFocus IN1110 in the language / languages: Dutch as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info