304375
3
Zoom out
Zoom in
Previous page
1/80
Next page
Instructions for installation and use
22
22
2
After removing the appliance
from its packaging, check that
it is intact. If in doubt, contact a
qualified technician immedia-
tely.
The inside of the machineThe inside of the machine
The inside of the machineThe inside of the machine
The inside of the machine
is blocked, for transportation,is blocked, for transportation,
is blocked, for transportation,is blocked, for transportation,
is blocked, for transportation,
by four screws and rubberby four screws and rubber
by four screws and rubberby four screws and rubber
by four screws and rubber
washers on the back panel.washers on the back panel.
washers on the back panel.washers on the back panel.
washers on the back panel.
Before using the washing
machine,
remove the screwsremove the screws
remove the screwsremove the screws
remove the screws,
remove the rubber washers
with the aid of the special
spacer (keeping all the parts)
and use the plastic plugs
provided to fill in the holes.
LevellingLevelling
LevellingLevelling
Levelling
The washing machine must be
levelled appropriately in order to
guarantee its correct functioning.
TT
TT
T
o leo le
o leo le
o le
vel the appliancevel the appliance
vel the appliancevel the appliance
vel the appliance
,,
,,
,
the f the f
the f the f
the f
eeteet
eeteet
eet
must be adjustedmust be adjusted
must be adjustedmust be adjusted
must be adjusted; the angle of
inclination, measured according to
the worktop, must not exceed 2°.
When placed on fitted carpet,
make sure the ventilation is not
obstructed within its surroundings.
Connection to the waterConnection to the water
Connection to the waterConnection to the water
Connection to the water
mainsmains
mainsmains
mains
Water pressure must range
within the values indicated on
the data plate on the rear of
your washing machine.
Connect the inlet hose
(situated unassembled inside
the drum) to a cold water tap
with a 3/4 gas threaded mouth.
If the water pipes are new or
left unused, run the water until
it is clear and free of debris.
Attach the hose to the
appliance, in line with the
appropriate water pipe inlet at
the top right.
Connecting the drain hoseConnecting the drain hose
Connecting the drain hoseConnecting the drain hose
Connecting the drain hose
On the back of the appliance,
towards the top, you will find a
hook onto which you should
fasten the drain hose if
necessary. Insert the other end
in a wall draining duct or place
it on the edge of a sink or tub
avoiding excessive kinks and
bending.
It should be placedIt should be placed
It should be placedIt should be placed
It should be placed
at a height ranging from 60 toat a height ranging from 60 to
at a height ranging from 60 toat a height ranging from 60 to
at a height ranging from 60 to
100 cm.100 cm.
100 cm.100 cm.
100 cm.
In case it is necessary to fix the
end of the hose at a height
below 60 cm from the ground,
it must be fixed in the
appropriate hook placed on
the back panel as mentioned
above.
The hook to be used in case the
drain hose ends at a height
below 60 cm.
If the hose drains into a tub or
sink, apply the plastic guide
and tie it to the tap.
The guide for draining into tubs
and sinks.
The hose must never remainThe hose must never remain
The hose must never remainThe hose must never remain
The hose must never remain
immerimmer
immerimmer
immer
sed in watersed in water
sed in watersed in water
sed in water
..
..
.
Extensions are inadvisable. In
case of absolute need, the
extension must have the same
diameter as the original hose
and must not exceed 150 cm
in length. In case of wall
draining pipes, their efficiency
must be checked by a qualified
technician. If the dwelling is on
one of the upper floors of a
building, there may be drain
trap problems causing the
washing machine to load and
unload water continuously.
In order to avoid such an
inconvenience, special anti-
drain trap valves are available
in shops.
Installation and removal
When theWhen the
When theWhen the
When the
appliance arrivesappliance arrives
appliance arrivesappliance arrives
appliance arrives
Whether new or just transported to a new house, installation is extremely
important for the correct functioning of your washing machine.
Electric connectionElectric connection
Electric connectionElectric connection
Electric connection
Before connecting the
appliance to the electric
socket, be sure that:
1) the electric socket is able
to sustain the appliance's
maximum power load
indicated on the data plate
and in compliance with the
law;
2) the supply voltage is
included within the values
indicated on the data
plate;
3) the socket is compatible
with the appliance's plug.
If not, do not use adapters,
but replace either the
socket or the plug;
4) electric household appli-
ances must be equipped
with an "earthing" system,
5) that the machine is not
placed on top of the power
supply cable once the
connection has been
made.
Warning!
Any modifications made to the
factory settings or an irregu-
lar electric connection, any
electrical, mechanical or hy-
draulic modification whatso-
ever to the appliance shall
render the guarantee invalid
and shall relieve the manufac-
turer and retailer of any and
all liability.
The feet are adjustable.
Water hose inlet to be fitted to
the top right.
Unblocking: removeUnblocking: remove
Unblocking: removeUnblocking: remove
Unblocking: remove
the 4 screws!the 4 screws!
the 4 screws!the 4 screws!
the 4 screws!
Plastic bags, polystyrene
foam, screws and other
packaging parts are not
children's toys, and are
potentially dangerous.
Do not throw the blocking
screws and the spacers
away. In the event of a
removal, they can be used
to block the components
inside the appliance again
and so protect it during
transport.
2
1
Warning: should the screws be
re-used, make sure you fasten
the shorter ones at the top.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit wt 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit wt 120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Indesit wt 120

Indesit wt 120 User Manual - Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info