55981
11
Zoom out
Zoom in
Previous page
1/72
Next page
11
GB
Troubleshooting
Your machine could fail to work. Before calling for Assistance (see page 12), make sure the problem can’t
easily be solved by consulting the following list:
Possible causes / Solution:
The appliance is not plugged into the socket, or not enough to make contact.
There has been a power failure.
The appliance door is not shut properly.
The
button has not been pressed.
The START/RESET button has not been pressed.
The water tap is not turned on.
A delayed start has been set (using the Delay Timer. see page 7)
The water inlet hose is not connected to the tap.
The hose is bent.
The water tap is not turned on.
There is a water shortage.
The water pressure is insufficient.
The START/RESET button has not been pressed.
The drain hose is not fitted between 65 and 100cm from the floor (see page 3).
The free end of the hose is underwater (see page 3).
The wall drainage system doesn’t have a breather pipe.
If the problem persists even after these checks, turn off the water tap, switch the
appliance off and call for Assistance. If the dwelling is on one of the upper floors of
a building, there may be drain trap problems causing the machine to load and
unload water continuously. In order to avoid such an inconvenience, special anti-
drain trap valves are available in shops.
The programme does not foresee the draining. Some programmes require
enabling the draining manually (see page 6).
The Easy Iron option is enabled: to complete the programme, press the
START/RESET button (see page 7).
The drain hose is bent (see page 3).
The drain duct is clogged.
The transit fixings were not removed correctly during installation (see page 2).
The machine is not level (see page 2).
The machine is closed in between furniture cabinets and the wall (see page 2).
The water inlet hose is not screwed on correctly (see page 2).
The detergent dispenser is obstructed, (to clean it see page 10).
The drain hose is not secured properly (see page 3).
Call for Assistance because this means there is an abnormality.
The detergent is not suitable for machine washing (it should bear the definition
“for washing machines” or “hand and machine wash”, or the like.)
You used too much detergent.
The appliance is not plugged into socket, or not enough to make contact.
There has been a power failure.
The appliance door is not shut properly.
A delayed start has been set (using the Delay Timer, see page 7).
The DRYING knob is on the 0 setting.
Did you select the correct heat/time setting? (see page 7).
Problem:
The machine won’t start?
The wash cycle won’t start?
The machine fails to load water?
The machine continuously loads
and unloads water?
The machine does not drain or
spin?
The machine vibrates too much
during the spin cycle?
The machine leaks?
The ON-OFF/DOOR LOCK LED
flashes rapidly at the same time
as at least one other LED?
There is too much foam?
The machine does not dry?
Tr7003gb_WIDXXL146.p65 27/01/06, 8.3011
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit WIDXXL 146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit WIDXXL 146 in the language / languages: English, Dutch, Swedish as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Indesit WIDXXL 146

Indesit WIDXXL 146 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info