46720
12
Zoom out
Zoom in
Previous page
1/12
Next page
11
GB
m odel
WG 1130 T
dimensions
width cm 59,5
height cm 85
depth cm 51
capacity
1 - 5 Kg
electrical
connections
voltage 240 Volt 50Hz
maximum absorbed pow er 2300 W
water
connections
maximum pressu re 1 M Pa (10 bar)
minimum pressu re 0,05 MPa (0,5 bar)
drum capacity 40,5 litres
spinning speed
up to 1050 rpm
Control
program s in
com pliance
with IEC
regulation 456
Cotton program :
Tu rn knob A to the "program 2"setting;
Tu rn knob B to the "60°C"setting.
This appliance conforms with the follow ing E.E.C.
directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and
subsequent modifications
- 89/336/EEC of 03/05/89 (Electrom agnetic
Com patibility) and subsequent modifications
Technical characteristics
Replacing the power supply cord
The power supply cord is specifically for this washing
machine and is only available from our authorised
Technical Assistance Service Centres.
To replace it, follow the instructions below:
- Make sure that the washing machine is not connected
to the electricity supply by unplugging the appliance from
the wall socket.
- Remove the covering lid by removing the two I screws and
pulling it towards you (Fig. 9).
- Disconnect the small cables from the radio interference
suppressor F (Fig. 10) taking care as to their position (small cable:
Blue=N; small cable: brown=L), leaving the Earth small
cable til last.
N.B.: The letters L, N and the symbol are written on the
radio interference suppressor.
Fig. 11 Fig. 12
Fig. 9 Fig. 10
- Move the upper part of the cord lead slightly away from
the back panel, pull the power supply cable upwards and
then remove it (Fig. 11).
To connect the new power supply cable, do the reverse.
To replace the covering lid, rest it onto the washing machine
(Fig. 12) and let it slide forwards until the hooks on the front
of it are inserted into the appropriate eyelets formed into
the control panel, then fasten the screws tightly back on.
N
L
F
I
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Indesit WG1033TPG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Indesit WG1033TPG in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info