Manual Indesit WD 12 S (page 14 of 20) (English)

35054

Zoom out

Zoom in

1/20

Treat your machine well and it will provide

many years of trouble free service

Easy Care and Maintenance

Your washer-dryer is a reliable companion in life and on the job. It is just as important for you to keep it in

shape.

Your washer-dryer is designed

to provide reliable service over

many years. A few simple steps

will help to prolong its life and

avoid problems. It is advisable,

to turn off water taps when the

machine is not to be used, this

protects the hoses, etc.

If the water in your area is too

hard, use a deliming product

(water is hard if it often leaves

whitish stains around taps or

drains, especially of bath tubs.

For more accurate information as

to the type of water in your

system, call the local water

works or a local plumber).

Pockets must always be

emptied removing even pins,

badges and any other hard

object.

The washer-dryer exterior

should be cleaned with a rag

dipped in lukewarm water and

soap.

Never exaggerate with doses.

Normal detergents already

contain deliming agents. Only if

the water is particularly hard,

that is, rich in lime content, do

we recommend the use of a

specific product at every wash.

A periodical wash cycle with a

dose of a deliming product,

without detergents or washing,

may prove useful.

Never use too much detergent

or additives because this could

cause an excess amount of

foam, scaling and possible

damage to the component parts

of your washer-dryer.

When in need, check the pump and the rubber hose.

The washer-dryer comes equipped with a self-cleaning pump that does not require any cleaning or maintenance.

Small objects may accidentally fall into the pump: coins, hair clips, loose buttons and other small items. To avoid

possible damage, they are withheld in an accessible pre-chamber, situated at the lower end of the pump.

It is important to wash

the detergent dispenser

regularly.

To prevent dried washing

powder from

accumulating, place the

dispenser under running

water for a few minutes.

Do not forget to empty all pockets: small objects can

cause damage to your washer-dryer.

Attention: Before attempting to examine this pre-chamber, first

ensure that the machine has finished its programme and is empty.

Unplug the machine, as with any maintenance.

To gain access gently ease down the top of the plinth panel situated at

the base of the machine, with a screwdriver etc, to release it. Then

ease the top edge forward to allow it to be lifted clear (Fig. 1). Place

a shallow dish or tray below the cover of the pre-chamber to catch

the small amount of water present. Release the cover by turning anti-

clockwise (Fig. 2). Ensure that the cover is securely replaced.

Re-fit the plinth cover by inserting the hooks on its lower edge into

the slots and ease the top edge back into position.

The water inlet hose

Check the rubber hose at least once a year. If you see any cracks, replace it immediately. When you use your washer-dryer,

water pressure is very strong and a cracked tube could easily split open.

Fig. 1

Fig. 2

Instructions for installation and use

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Indesit WD 12 S in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Indesit WD 12 S Manual

Product: